Supermicro H8DA8 Handleiding

Supermicro Moederbord H8DA8

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro H8DA8 (78 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/78

H8DA8

H8DAE

H8DAR-8

H8DAR-i

USER’S MANUAL

Revision 1.1a

SUPER ®

Manual Revision 1.1a

Release Date: January 21, 2010

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. reserves the right to make changes to the product described in this

manual at any time and without notice. This product, including software, if any, and documenta-

tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any

medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

H8DA8/H8DAE/H8DAR-8/H8DAR-i serverboard. The H8DA8/H8DAE/H8DAR-8/

H8DAR-i is based on the AMD-8131/8111 chipset and supports single or dual AMD

Opteron 200 series type processors in 940-pin microPGA ZIF sockets and up to 32

GB of DDR266 or 16 GB of DDR333/400.

Please refer to the serverboard speciﬁ cations pages on our web site for updates

on supported processors. This product is intended to be professionally installed.

Manual Organization

Chapter 1 includes a checklist of what should be included in your serverboard

box, describes the features, speciﬁ cations and performance of the serverboard and

provides detailed information about the chipset.

Chapter 2 begins with instructions on handling static-sensitive devices. Read this

chapter when installing the processor(s) and memory modules and when installing

the serverboard in a chassis. Also refer to this chapter to connect the ﬂ oppy and

hard disk drives, the serial ports, the mouse and keyboard and the twisted wires

for the power and reset buttons and the system LEDs.

If you encounter any problems, see Chapter 3, which describes troubleshooting

procedures for the video, the memory and the setup conﬁ guration stored in CMOS.

For quick reference, a general FAQ (Frequently Asked Questions) section is pro-

vided. Instructions are also included for contacting technical support. In addition,

you can visit our web site for more detailed information.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Code Messages.

Appendix B lists BIOS POST Checkpoint Codes.

Preface

iii

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	H8DA8
Breedte:	305 mm
Diepte:	332 mm
Grafische adapter:	Rage XL
Type stroombron:	ATX
Aantal USB 2.0-poorten:	5
Aantal Ethernet LAN (RJ-45)-poorten:	2
Meegeleverde software:	-Optional IPMI 2.0 \n-Super Doctor III\n-Watch Dog
Processor socket:	Socket 940
Processorfabrikant:	AMD
Maximum intern geheugen:	32 GB
Netwerkfuncties:	10BASE-T, 100BASE-TX, 1000BASE-T, RJ45
Chipset moederbord:	AMD 8131
PS/2 poort(en):	2
Seriële poort(en):	2
Soorten RAID:	0, 1
Uitbreidingsslots:	2 x 64-bit 133/100MHz PCI-X\n2 x 64-bit 66MHz PCI-X\n2 x 32-bit 33MHz PCI\n1 x IPMI 2.0
Maximum geheugen grafische adapter:	8 MB
Max. aantal SMP-processoren:	2
Moederbord form factor:	Verlengd ATX
Aantal geheugenslots:	8
Grootte BIOS-geheugen:	32 Mbit
Aantal SATA-aansluitingen:	2
Aansluiting voor diskettestation:	Ja
Grafische controller:	PCI
RAID-ondersteuning:	AIC-7902W