Supermicro C2SEE Handleiding

Supermicro Moederbord C2SEE

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro C2SEE (93 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/93

C2SEA

C2SEE

USER’S MANUAL

Revision 1.0c

Manual Revision: Rev. 1.0c

Release Date: July 20, 2009

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall be

the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims

will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

This equipment has been tested and found to comply with the limits for a Class B digital device pursu-

ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate ra-

dio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction

manual, may cause interference with radio communications. However, there is no guarantee that in-

terference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, you are

encouraged to try to correct the interference by one or more of the following measures:

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and the receiver.

· Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

· Consult the dealer or an experienced radio/television technician for help.

WARNING: Handling of lead solder materials used in this prod-

uct may expose you to lead, a chemical known to the State of

California to cause birth defects and other reproductive harm.

Preface

This manual is written for system integrators, PC technician and knowledgeable

PC users. It provides information for the installation and use of the C2SEA/

C2SEE motherboard.

About this Motherboard

The C2SEA/C2SEE supports single Core™ 2 Extreme/Core™ 2 Quad/Core™ 2

Duo Processor with a system bus speed of 1333 MHz/1066 MHz/800 MHz. The

Intel® Core™ 2 Extreme/Core™ 2 Quad/Core™ 2 Duo Processor supports the

775-Land Grid Array Package that interfaces with the motherboard via an LGA775

socket. With support of Quad-Core/Dual-Core Technology, Wide Dynamic Execu-

tion, FSB Dynamic Bus Inversion (DBI), Advanced Digital Media Boost, Smart

Memory Access, and Thermal Management 2 (TM2), the C2SEA/C2SEE delivers

unparalleled system performance and great power efciency for desktop systems.

Please refer to the motherboard specications pages on our web site (http://www.

supermicro.com/Products/) for updates on supported processors. This product is

intended to be installed and serviced by a professional technician.

Manual Organization

Chapter 1 describes features, specications and detailed information about the

motherboard and the chipset. provides hardware installation instrucChapter 2 -

tions. Read this chapter when installing the processor, memory modules and other

hardware components into the system.

Chapter 3 describes troubleshooting procedures for the video, the memory and the

system setup stored in CMOS if you encounter problems.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A Appendix B Apand list BIOS POST Error Codes and Messages. -

pendix C Appendix Dprovides Software Installation Instructions. describes the

BIOS Recovery procedure.

Conventions Used in the Manual:

Pay attention to the following symbols for proper installation and to prevent damage

to the motherboard components or injury to yourself:

Warning: Important information given to ensure proper system installation,

to prevent bodily injury or damage to the components.

Note: Additional Information given to differentiate various models or to

ensure correct system setup.

Preface

iii

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	C2SEE
Breedte:	12 mm
Diepte:	9.6 mm
Type stroombron:	ATX
Aantal USB 2.0-poorten:	12
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Audio-uitgang:	Realtek ALC888
DVI-D poorten:	1
Processor socket:	LGA 775 (Socket T)
Processorfabrikant:	Intel
Audio-uitgangskanalen:	7.1 kanalen
Flash memory:	16 MB
Aantal IEEE 1394-/Firewire-poorten:	2
PS/2 poort(en):	2
Aantal eSATA-poorten:	1
Moederbord form factor:	ATX
ATX Power connector (24-pin):	Ja
USB 2.0 aansluitingen:	12
Aansluiting voor diskettestation:	Ja
Chassis intrusion aansluiting:	Ja