Sunbeam Alpha SR6350 Handleiding

Sunbeam Strijkijzer Alpha SR6350

Lees hieronder de 📖 handleiding in het Nederlandse voor Sunbeam Alpha SR6350 (13 pagina's) in de categorie Strijkijzer. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13

SUNBEAM

ALPHA IRON

SR6350

User Guide

SR6350 Sunbeam Alpha Iron

Contents

Sunbeam’s Safety Precautions 3

Features of your Sunbeam Iron 4

Features of your Sunbeam Iron 6

Using your Sunbeam Iron 8

Care and Cleaning 9

Ironing Chart 10

Sunbeam is very safety conscious when designing

and manufacturing consumer products, but it is

essential that the product user also exercise care

when using an electrical appliance. Listed below

are precautions which are essential for the safe use

of an electrical appliance:

• Read carefully and save all the instructions

provided with an appliance.

• Always turn the power off at the power outlet

before you insert or remove a plug. Remove

by grasping the plug - do not pull on the cord.

• Turn the power off and remove the plug when

the appliance is not in use and before cleaning.

• Do not use your appliance with an extension cord

unless this cord has been checked and tested by

a qualified technician or service person.

• Always use your appliance from a power outlet of

the voltage (A.C. only) marked on the appliance.

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

• Children should be supervised to ensure that

they do no play with the appliance.

• The temperature of accessible surfaces may be

high when the appliance is operating.

• Never leave an appliance unattended while in

use.

• Do not use an appliance for any purpose other

than its intended use.

• Do not place an appliance on or near a hot gas

flame, electric element or on a heated oven.

• Do not place on top of any other appliance.

• Do not let the power cord of an appliance hang

over the edge of a table or bench top or touch

any hot surface.

• Do not operate any electrical appliance with

a damaged cord or after the appliance has

been damaged in any manner. If damage is

suspected, return the appliance to the nearest

Sunbeam Appointed Service Centre

for examination, repair or adjustment.

• For additional protection, Sunbeam recommend

the use of a residual current device (RCD) with

a tripping current not exceeding 30mA in

the electrical circuit supplying power to your

appliances.

• Do not immerse the appliance in water or any

other liquid unless recommended.

• Appliances are not intended to be operated by

means of an external timer or separate remote

control system.

• This appliance is intended to be used in

household and similar applications such as: staff

kitchen areas in shops, offices and other working

environments; farm houses; by clients in hotels,

motels and other residential type environments;

bed and breakfast type environments.

If you have any concerns regarding the performance and use of your appliance,

Please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

Sunbeam’s Safety Precautions

SAFETY PRECAUTIONS FOR YOUR IRON

• Do not leave a hot iron within reach of children.

If they come into contact with a hot iron it could

lead to serious burns.

• Iron only on an ironing board.

• An iron takes approximately 30 minutes to cool

down. Allow the iron to cool completely before

storing.

• Do not wind the cord around the soleplate while

the iron is still hot.

• Do not leave the iron unattended while it is

plugged into the power outlet.

• Always unplug the iron from the power outlet

before filling or emptying the water tank.

• The iron must be used and rested on a flat and

stable surface.

• Always store your iron resting on its heel rest.

• When placing the iron on its heel, ensure that

the surface on which the stand is placed is

stable.

• The iron is not to be used if it has been

dropped, if there are any visible signs of

damage or if it is leaking.

Product specificaties

Merk:	Sunbeam
Categorie:	Strijkijzer
Model:	Alpha SR6350

Heb je hulp nodig?

Als je hulp nodig hebt met Sunbeam Alpha SR6350 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Strijkijzer Sunbeam

Sunbeam Verve 680 SRA6800 Handleiding

30 Augustus 2023

Sunbeam PressXPress STC5000 Handleiding

30 Augustus 2023

Sunbeam Verve 650 CeraFlow SRC6500 Handleiding

30 Augustus 2023

Sunbeam Verve 655 SRS6550 Handleiding

30 Augustus 2023

Sunbeam Simple Press 3050 Handleiding

14 Juni 2023

Sunbeam Verve SR6585 Handleiding

1 Juni 2023

Sunbeam Steam Master LX 4059 Handleiding

30 Mei 2023

Sunbeam Pro Steam Travel SR2300 Handleiding

25 Mei 2023

Sunbeam Pro Steam SR4400 Handleiding

25 Mei 2023

Sunbeam Pro Steam Compact SRS2000 Handleiding

9 Mei 2023

Handleiding Strijkijzer

Nieuwste handleidingen voor Strijkijzer

Di4 Jet Pressing 2850W Handleiding

15 April 2024

Di4 Vapore Stiro 3000 Handleiding

15 April 2024

Di4 Jet Pressing Infinity Handleiding

15 April 2024

Di4 Jet Pressing Facile Handleiding

15 April 2024

Di4 Jet Pressing Pro 5b Handleiding

15 April 2024

Melissa 16390057 Handleiding

11 April 2024

Hacienda CSI232 Handleiding

11 April 2024

Bosch Serie 8 VarioComfort TDS8060DE Handleiding

9 April 2024

Essentiel B Iris EFV 2402 Handleiding

9 April 2024

Philips Perfective GC5010 Handleiding

5 April 2024