Sun Pumps PCA-30M1D Handleiding

Sun Pumps Niet gecategoriseerd PCA-30M1D

Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Pumps PCA-30M1D (17 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 99 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17

Table of Contents

Introduction ………………………………………………………………………... 1.0

Precautions

Product Overview …………………………………………………………………. 2.0

Controller Features ………………..………………………………………………. 2.1

Application ………………………………………………………………………... 2.2

Installation and Operations ………………………………………………………… 3.0

Warning

Location …………………………………………………………………………… 3.1

System Design B 3.2 asics ……………………………………………………………...

Figure 1: Solar Pump System Terms and Head Calculations

Well Measurements ……………………………………………………………… 3.3

Pump Installation ………………………………………………………………….. 3.4

Wiring 3.5………………………………………………………………………………

Figure 2: Control Panel

Figure 3: Dip Switch Settings

Controller Settings ………………………………………………………………… 3.6

Auxiliary Control Circuits .. ... ……………………………………………… … ……… 3.7

Remote Switch

Low Water Shut-Down Circuit

Power Limit (Speed Control)

Troubleshoot ing …………………………………………………………...……….. 4.0

Controller does not turn on

Controller turns on but pump does not run

Pump is running but the output is low

Pump draws excessive current

Before Calling Sun Pumps

Before Calling SunPumps …………………………………………………………... 5.0

Warranty Statement ………………………………………………………………… 6.0

Phone (928) 348-9652 Fax (928) 348-9653

1.0 Introduction

Thank you for selecting a SunPumps SD series solar pump system. The SDS series pump and PCA- -S 30

M1D series pump controller are the key components to high quality solar powered pumping systems. Their

stand-alone, pollution free operation makes them an ideal solution for remote homes, irrigation projects,

and wildlife and stock watering without violating the environment.

SunPumps SDS series pumps are diaphragm type, DC powered, submersibles constructed of high quality

stainless steel for the SDS-D and SDS-Q series pumps and Ryton and stainless steel for the SDS-T series

pumps. These pumps were designed specically for water delivery in remote locations .

The PCA series controllers are microprocessor based solid state DC power converters designed as the

interface between a solar module array and the SDS series DC pump motor. The purpose of the controller

is to operate the high eciency, high reliability DC motor and maximize the total daily water output while

providing protection for the pump as well as providing an interface with other related pumping system

equipment.

Although these SDS series pump systems are easy to install, please read this manual to become

familiar with the controller features, functions, connection points and various configurations. For

future reference, keep this manual and other relevant product information in a safe place.

PRECAUTIONS

 Safety First Always understand what you are doing when working with any form of –

electricity. Guessing may cause product damage and/or severe personal injury.

 Shut down all power when working on the system.

 Do not attempt to feed live wires into the PC-series controller. P duct damage and/or ro

personal injury may result.

 Do not exceed the voltage rating of the controller.

 Do not set the controller to exceed the power rating of the motor.

 Do not splash water on the controller when the cover is open.

 Mount the controller in a shaded, well vented position, vertical .

2.0 Product Overview

The SunPumps PCA- -M series controllers were designed specically for SunPumps SDS-series, DC 30 1D

submersible pumps. When properly installed and congured, the unique features incorporated into this

stand-alone system will automatically control and protect your pump system permitting many years of

dependable, trouble free service.

When used as a solar electric panel direct system the PCA series controllers will provide pump protection

from ov -voltage and over-current conditions as well as current boosting in low sunlight conditions. er

2.1 Controller Features

1. Current boosting for matching the load requirements of the pump.

2. Voltage regulation of the solar electric array around its maximum power point. (MPPT)

3. Over-current protection via integrated electronic circuit breaker.

4. Voltage and current limiting to pump motor..

5. Adjustable output motor power control for precision output ow.

6. System ON/OFF switch.

7. L indicators; 1 Power In, 2. Motor R , 3. Remote Switch 4. Over-Current, 5. Low Water ED . un ,

Cut-O

Product specificaties

Merk:	Sun Pumps
Categorie:	Niet gecategoriseerd
Model:	PCA-30M1D
Gewicht:	907 g
Type product:	Bevestigingsadapter
Installatieopties:	Wandmontage
Dispergeerbaar vermogen:	150 W