Sun Joe SJ-WBS70 Handleiding

Sun Joe Niet gecategoriseerd SJ-WBS70

Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe SJ-WBS70 (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24

Original instructions.

A Division of Snow Joe, LLC ModelSJ-WBS70 Form No. SJ - SJ-WBS70 - 880E - M

OPERATOR’S MANUAL

70-LB MULTI-PURPOSE

WALK-BEHIND SPREADER

ADJUSTABLE SPREAD CONTROL

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may result

in injury.

General Safety

WARNING!

This product is not intended for use by

children or by unassisted, unsupervised persons whose

physical, sensory or mental capabilities prevent them from using

it safely. Children should be supervised to ensure that they do

not play near, stand on or climb in the spreader.

Before using your spreader, please check it carefully for any

defects. If you ﬁnd any, do not use it. Instead, contact your

authorized Snow Joe® + Sun Joe® dealer or call the SnowJoe®

+ SunJoe® customer service center at 1‑866‑SNOWJOE

(1‑866‑766‑9563).

WARNING!

When using the spreader, basic safety

precautions should always be followed to reduce the risk of

personal injury. These include:

• Stay alert – Watch what you are doing. Use common

sense. Do not operate the spreader when you are tired or

under the influence of drugs, alcohol, or other medication.

• Usage – Do not use this product for any job except for

what it is intended for. Do not carry passengers with the

spreader. Never tow it with a motorized vehicle.

• Materials – The spreader is designed to spread fertilizer,

grass seeds and ice melt. Do not use with powders,

manure, top soil, gravel or mulch.

• Weight limit – Do not exceed the weight limit of 70lbs

(32kg).

• Wind – Do not use the spreader on windy days when

spreading grass seeds or herbicides.

• Load/Unload – Always use caution when loading and

unloading the spreader.

• Moving parts – Keep hands and feet away from moving

parts while using the product.

• Personal protective equipment – Always wear protective

footwear when using the product.

Work Area Safety

• Work area – Always inspect the area where the machine is

to be used and operate it in a well‑lit environment.

• Incline – Be careful when using the spreader on an incline,

as it may tip over.

• Avoid dangerous environments – Do not use the product

close to creeks, ditches, large holes and public highways.

Maintenance + Storage

WARNING!

Do not use detergents, acids, alkaline

solutions, bleaches or solvents such as acetone to clean your

spreader. These substances may damage the plastic parts of the

machine.

• Inspect before use – To ensure the spreader is in good

working condition, visually inspect for any loose fasteners

or worn, missing or damaged parts.

• Replacement parts – When servicing, use only identical

replacement parts. Replace or repair damaged parts

immediately. Contact the SnowJoe® + SunJoe® customer

service center at 1‑866‑SNOWJOE (1‑866‑766‑9563) for

assistance.

Know Your 70-lb Multi-Purpose Walk-Behind Spreader

Read the owner’s manual and safety instructions carefully before operating the spreader. Compare the illustration below to the

product in order to become familiar with the location of the various controls and adjustments. Save this manual for future reference.

Technical Data

Hopper Volume 0.92 ft ................................................................ 3 (26 L)

Max Load Capacity 70 lbs (31.8 kg) .....................................................

Max Coverage Width ...............................................10 ‑ 12ft (3 ‑ 3.7m)

Feed Control ..............Closed | Low | Medium | High | Fully Opened

Multi‑Use ....................................... Fertilizer | Grass Seeds | Ice Melt

Net Weight 23.5 lbs (10.7 kg) .................................................................

1. Cover

2. Handle

3. Control lever

4. Hopper

5. Left handle support

6. Control rod

7. Feed plate lever

8. Right handle support

9. Axle

10. Gearbox

11. Stand

12. Wheel

2 3

5 86 7

10 9111314 1215

13. Impeller

14. Frame

15. Hopper screen

Unpacking

Carton Contents

• Spreader

• Handle

• Handle support (x2)

• Control rod

• Stand

• Hopper screen

• Cover

• M6x45 carriage bolt (x2)

• M6x40 carriage bolt (x6)

• M6x16 hex bolt (x2)

• Curved washer (x8)

• Nylon washer (x2)

• M6 lock nut (x10)

• M10/M13 wrench

• M10/M14 wrench

• Manual with registration card

1. Carefully remove the spreader and check to see that all of

the above items are supplied.

2. Inspect the product carefully to make sure no breakage or

damage occurred during shipping. If you find damaged or

missing parts, DO NOT return the unit to the store. Instead,

please call the SnowJoe® + SunJoe® customer service

center at 1‑866‑SNOWJOE (1‑866‑766‑9563).

NOTE: Do not discard the shipping carton and packaging

materials until you are ready to use the spreader. The

packaging is made of recyclable materials. Properly dispose

of these materials in accordance with local regulations or

save the packaging for long‑term product storage.

IMPORTANT! The equipment and packaging materials are not

toys. Do not let children play with plastic bags, foils, or small

parts. These items can be swallowed and pose a suﬀocation

risk!

Assembly

Use the two provided wrenches to tighten the nuts and bolts.

1. Turn the spreader upside down.

2. Install the stand onto the frame of the spreader using two

sets of M6x40 carriage bolts, curved washers and lock nuts

as shown (Fig. 1).

3. Install one of the handle supports onto the frame of the

spreader using two sets of M6x40 carriage bolts, curved

washers and lock nuts. Do the same for the other side

(Fig 2).

NOTE: Do not tighten the lock nuts yet.

4. Turn the spreader right side up.

5. Slide the end of the handle between the two handle

supports and fix it in place using two sets of M6x45

carriage bolts, curved washers and lock nuts (Fig. 3).

Fig. 1

Stand

M6x40

carriage

bolt

Curved

washer

Lock nut

Fig. 2

Handle

support

Curved

washer

Lock nut M6x40

carriage bolt

Fig. 3

Handle

Curved washer

Lock nut

M6x45

carriage bolt

Product specificaties

Merk:	Sun Joe
Categorie:	Niet gecategoriseerd
Model:	SJ-WBS70

Heb je hulp nodig?

Als je hulp nodig hebt met Sun Joe SJ-WBS70 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Sun Joe

Sun Joe BDL-A0075 Handleiding

11 Augustus 2023

Sun Joe SJ-SHLV06 Handleiding

11 Augustus 2023

Sun Joe SJ-SHLV07 Handleiding

11 Augustus 2023

Sun Joe 24V-WB1000 Handleiding

3 Juli 2023

Sun Joe TJW24C-RM Handleiding

16 Juni 2023

Sun Joe SJ-WBFG Handleiding

16 Juni 2023

Sun Joe 24V-AJC-LTW-PRP-RM Handleiding

2 Juni 2023

Sun Joe 24V-X2-TLR14-CT Handleiding

26 Mei 2023

Sun Joe PJ3600C-RM Handleiding

18 Mei 2023

Sun Joe 24V-X2-TLR14-RM Handleiding

9 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024