Sun Joe iON8024-CT Handleiding

Sun Joe Sneeuwblazer iON8024-CT

Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe iON8024-CT (28 pagina's) in de categorie Sneeuwblazer. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28

A Division of Snow Joe® , LLC Model iON8024-CT Form No. SJ-iON8024-CT-880E-M

OPERATOR’S MANUAL

CORDLESS SNOW

BLOWER - CORE TOOL

24-INCH | 80-VOLT | LED LIGHTS | SELF-PROPELLED | 2-STAGE

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all instructions when using cordless snow blowers.

Basic safety precautions should always be followed to reduce

the risk of re, electric shock, and personal injury.

General Safety Rules

Notice the personal safety alert symbol used in this m

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

• Keep work area clean and well lit – Cluttered, dark areas

invite accidents.

• Keep bystanders away – All bystanders and pets should

be kept a safe distance away from the work area.

• Dress properly – lrDo not wear loose clothing or jewe y.

They can get caught in moving parts. Protective rubber

gloves and non-slip footwear are recommended when

working outdoors.

• Use the right product – Do not use this machine for any

job except that for which it is intended.

• mCAUTION! – Exercise caution to avoid slipping or falling.

Wear protective footwear that will protect your feet and

improve your footing on slippery surfaces.

• Also use safety footwear, snug-tting Use safety glasses –

clothing, protective gloves, hearing and head protection.

• Do not force the snow blower – Use the snow blower

at the rate for which it was designed to ensure optimal

performance and safe operation.

• Stay alert – Watch what you are doing. Use common

sense. Do not operate the snow blower when you are tired

or under the inuence of alcohol or drugs.

• Do not overreach – Keep proper footing and balance at

all times.

• Store indoors – When not in use, the snow blower should

be kept dry and stored out of the reach of children in a high

or locked place.

• Maintain snow blower with care – Follow instructions for

lubricating and changing accessories.

mWARNING! Always disengage both triggers, press

down the safety switch, turn o and remove the key from

the switch, and disconnect the battery packs; wait for all

movement to stop before making any adjustments, inspecting,

servicing, changing accessories, cleaning the snow blower,

or when any other dangerous conditions present. Any

such operation should be performed after revolving parts

inside the snow blower stop completely. Such preventive

safety measures reduce the risk of starting the power tool

accidentally.

mWARNING! When replacing any parts, you must strictly

observe the instructions and procedures described in this user

manual. Special care should be paid to any rubber parts, since

these parts may increase the engine load and decrease its

mechanical power if damaged.

mWARNING! If you notice that the snow blower is not

running properly or hear abnormal sounds from the engine

when it is in use, immediately stop the machine, disconnect the

battery packs, and contact Snow Joe® + Sun Joe® customer

service center at 1-866-SNOWJOE (1-866-766-9563).

• Surfaces – This snow blower is intended for use on

paved surfaces. Do not use on gravel, stone or other

unpaved surfaces unless the snow blower is adjusted for

such surfaces according to the instructions given in the

operator’s manual.

• Moving parts present risks – Keep your face, hair,

clothing, hands, and feet away from moving parts. All

guards and safety attachments must be installed properly

before using the unit. Shut o and disconnect the battery

packs before touching any parts other than the handles and

switch.

• Avoid unintentional starting – Make sure the safety switch

and the power switch are in the o position before inserting

the battery packs in the unit. Do not carry the snow blower

with the safety switch and the triggers engaged.

• Do not overreach – Maintain proper footing and balance at

all times. Place heels rmly on the ground and tightly grasp

the handle grips. Watch for uneven surfaces and do not

overreach. In case you fall or collide with the snow blower,

inspect the unit for any damages or cracks. When stepping

backwards, be careful to avoid obstacles beneath your feet

or behind you to avoid falling.

mWARNING! If the snow blower strikes any object,

follow these steps:

i) Stop the snow blower, remove key and remove the

battery packs.

ii) Inspect for damage.

iii) Repair any damage before restarting and operating

the snow blower.

Battery + Charger

Safety Instructions

NOTE: This unit is a core tool. The battery and the charger

are not included. They must be purchased separately.

Model iON8024-CT is compatible with the following batteries

(models iBAT40XR and iBAT40XRP) and chargers (models

iCHRG40 and iCHRG40-DPC). See page 23 for more

information.

We pay a great deal of attention to the design of every battery

pack to ensure that we supply you with batteries that are safe,

durable and have a high energy density. The battery cells have

a wide range of safety devices. Each individual cell is initially

formatted and its electrical characteristic curves are recorded.

This data is then used exclusively to be able to assemble the

best possible battery packs.

Despite all the safety precautions, caution must always be

exercised when handling batteries. The following points must

be obeyed at all times to ensure safe use. Safe use can only

be guaranteed if undamaged cells are used. Incorrect handling

of the battery pack can cause cell damage.

IMPORTANT! Analyses conrm that incorrect use and poor

care of high-performance batteries are the main factors

responsible for personal and/or product damage.

mWARNING! Use only approved replacement batteries;

other batteries may damage the cordless snow blower and

cause it to malfunction, which can lead to serious personal

injury.

mCAUTION! To reduce the risk of injury, charge the

EcoSharp® PRO iBAT40XRP lithium-ion battery packs only

in its designated lithium-ion charger, the iCHRG40-DPC

or iCHRG40. Other types of chargers present risk of re,

personal injury and damage. Do not wire a battery pack to a

power supply plug or car cigarette lighter. Such misuse will

permanently disable or damage the battery pack.

• Avoid dangerous environments – Do not charge the

battery pack in rain, snow or in damp or wet locations.

Do not use the battery pack or charger in the presence of

explosive atmospheres (gaseous fumes, dust or ammable

materials) because sparks may be generated when inserting

or removing the battery pack, which could lead to a re.

• Charge in a well-ventilated area – Do not block the

charger vents. Keep them clear to allow for proper

ventilation. Do not allow smoking or open ames near a

charging battery pack. Vented gases may explode.

The safe temperature range for the battery is -4°F NOTE:

(-20°C) to 113°F (45°C). Do not charge the battery outside

in freezing weather; charge it at room temperature.

• Maintain charger cord – When unplugging the charger, pull

the plug, not the cord, from the receptacle to reduce the

risk of damage to the electrical plug and cord. Never carry

the charger by its cord or yank it by the cord to disconnect

it from the receptacle. Keep the cord away from heat, oil

and sharp edges. Make sure the cord will not be stepped

on, tripped over or subjected to damage or stress when the

charger is in use. Do not use the charger with a damaged

cord or plug. Replace a damaged charger immediately.

• Do not use an extension cord unless it is absolutely

necessary – Using the wrong, damaged or improperly

wired extension cord poses a risk of re and electric shock.

If an extension cord must be used, plug the charger into a

properly wired 16 gauge or larger extension cord with the

female plug matching the male plug on the charger. Make

sure that the extension cord is in good electrical condition.

• Charger iCHRG40 or iCHRG40-DPC is rated for 120 volt

AC only – The charger must be plugged into an appropriate

receptacle.

• Use only recommended attachments – Use of an

attachment not recommended or sold by the battery

charger or battery pack manufacturer may result in risk of

re, electric shock or personal injury.

• Unplug charger when not in use – Make sure to remove

battery packs from unplugged chargers.

mWARNING! To reduce the risk of electric shock,

always unplug the charger before performing any cleaning

or maintenance. Do not allow water to ow into the charger.

Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock

hazards.

• Do not burn or incinerate battery packs – Battery packs

may explode, causing personal injury or damage. Toxic

fumes and materials are created when battery packs are

burned.

• Do not crush, drop or damage battery packs – Do not

use the battery pack or charger if they have sustained a

sharp blow, been dropped, run over or have been damaged

in any way (i.e. pierced with a nail, hit with a hammer,

stepped on, etc.).

• Do not disassemble – Incorrect reassembly may pose

a serious risk of electric shock, re or exposure to toxic

battery chemicals. If the battery or charger are damaged,

contact an authorized Snow Joe® + Sun Joe® dealer or

call the Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563) for assistance.

• Battery chemicals cause serious burns – Never let a

damaged battery pack contact the skin, eyes or mouth.

If a damaged battery pack leaks battery chemicals, use

rubber or neoprene gloves to safely dispose of it. If skin

is exposed to battery uids, wash the aected area with

soap and water and rinse with vinegar. If eyes are exposed

to battery chemicals, immediately ush with water for 20

minutes and seek medical attention. Remove and dispose

of contaminated clothing.

• Do not short circuit – A battery pack will short circuit if

a metal object makes a connection between the positive

and negative contacts on the battery pack. Do not place a

battery pack near anything that may cause a short circuit,

such as paper clips, coins, keys, screws, nails and other

metallic objects. A short-circuited battery pack poses a risk

of re and severe personal injury.

• Store your battery packs and charger in a cool, dry

place – Do not store the battery packs or charger where

temperatures may exceed 104ºF (40ºC), such as in direct

sunlight or inside a vehicle or metal building during the

summer.

Information about the battery

NOTE: Model iON8024-CT is compatible with the following

battery packs (sold separately): iBAT40XR or iBAT40XRP.

The battery packs ship partially charged, and must be charged

completely before you use the tool for the rst time.

1. The battery packs supplied with your cordless snow

blower are only partially charged. The battery packs have

to be charged completely before you use the tool for the

rst time.

2. For optimum battery performance, avoid low discharge

cycles by charging the battery packs frequently.

3. Store the battery packs in a cool place, ideally at 59°F

(15°C) and charged to at least 40%.

4. Lithium-ion batteries are subject to a natural aging

process. The battery pack must be replaced at the latest

when its capacity falls to just 80% of its capacity when

new. Weakened cells in an aged battery pack are no

longer capable of meeting the high power requirements

needed for the proper operation of your snow blower,

and therefore pose a safety risk.

5. Do not throw battery packs into an open re as this poses

a risk of explosion.

6. Do not ignite the battery pack or expose it to re.

7. Do not exhaustively discharge batteries. Exhaustive

discharge will damage the battery cells. The most

common cause of exhaustive discharge is lengthy storage

or non-use of partially discharged batteries. Stop working

as soon as the performance of the battery falls noticeably

or the electronic protection system triggers. Place the

battery pack in storage only after it has been fully charged.

8. Protect batteries and the tool from overloads. Overloads

will quickly result in overheating and cell damage inside

the battery housing even if this overheating is not apparent

externally.

9. Avoid damage and shocks. Immediately replace batteries

that have been dropped from a height of more than one

meter or those that have been exposed to violent shocks,

even if the housing of the battery pack appears to be

undamaged. The battery cells inside the battery may have

suered serious damage. In such instances, please read

the waste disposal information for proper battery disposal.

10. If the battery pack suers overloading and overheating,

the integrated protective cuto will switch o the

equipment for safety reasons.

IMPORTANT! Do not press the ON/OFF switch any more

if the protective cut-o has been activated. This may

damage the battery pack.

11. Use only original battery packs. The use of other batteries

poses a re risk and may result in injuries or an explosion.

Information about the charger and the

charging process

1. Please check the data marked on the rating plate of the

battery charger . Be sure to connect the (sold separately)

battery charger to a power supply with the voltage marked

on the rating plate. Never connect it to a dierent mains

voltage.

2. Protect the battery charger and its cord from damage.

Keep the charger and its cord away from heat, oil and

sharp edges. Have damaged cords repaired without delay

by a qualied technician at an authorized Snow Joe® +

Sun Joe® dealer or call the Snow Joe® + Sun Joe®

customer service center at 1-866-SNOWJOE

(1-866-766-9563).

3. Electrical plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

grounded appliances. Unmodied plugs and matching

outlets will reduce the risk of electric shock.

4. Keep the battery charger, battery pack(s) and the cordless

tool out of the reach of children.

5. Do not use the supplied battery charger to charge other

cordless tools.

6. During periods of heavy use, the battery pack will become

warm. Allow the battery pack to cool to room temperature

before inserting it into the charger to recharge.

7. Do not overcharge batteries. Do not exceed the maximum

charging times. These charging times only apply to

discharged batteries. Frequent insertion of a charged or

partially charged battery pack will result in overcharging

and cell damage. Do not leave batteries in the charger for

days on end.

8. Never use or charge batteries if you suspect that it has

been more than 12 months since the last time they were

charged. There is a high probability that the battery pack

has already suered dangerous damage (exhaustive

discharge).

9. Charging batteries at a temperature below 50°F (10°C) will

cause chemical damage to the cells and may cause a re.

10. Do not use batteries that have been exposed to heat

during the charging process, as the battery cells may have

suered dangerous damage.

11. Do not use batteries that have suered curvature or

deformation during the charging process or those that

exhibit other atypical symptoms (gassing, hissing,

cracking, etc.)

12. Never fully discharge the battery pack (maximum

recommended depth of discharge is 80%). A complete

discharge of the battery pack will lead to premature aging

of the battery cells.

Protection from environmental

inuences

1. Wear suitable work clothes. Wear safety goggles.

2. Protect your cordless tool and the battery charger from

moisture and rain. Moisture and rain can cause dangerous

cell damage.

Product specificaties

Merk:	Sun Joe
Categorie:	Sneeuwblazer
Model:	iON8024-CT

Heb je hulp nodig?

Als je hulp nodig hebt met Sun Joe iON8024-CT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Sneeuwblazer Sun Joe

Sun Joe SJ624E Handleiding

9 Juni 2023

Sun Joe iON8024-XR Handleiding

8 Januari 2023

Sun Joe iON8024-CT Handleiding

7 Oktober 2022

Handleiding Sneeuwblazer

Nieuwste handleidingen voor Sneeuwblazer

Snow Joe 24V-SS13.5-XR Handleiding

27 Februari 2024

Honda HSS760A Handleiding

21 Februari 2024

Honda HSS 760A T Handleiding

21 Februari 2024

Troy-Bilt Arctic Storm 34 Handleiding

31 Januari 2024

Troy-Bilt Storm 3090 Handleiding

31 Januari 2024

Troy-Bilt Arctic Storm 3010 XP Handleiding

31 Januari 2024

Troy-Bilt Storm 9528 Handleiding

31 Januari 2024

Troy-Bilt Storm 2840 Handleiding

31 Januari 2024

Troy-Bilt Storm 2620 Handleiding

31 Januari 2024

Troy-Bilt Storm 2600 Handleiding

31 Januari 2024