Strymon Sunset Handleiding
Pagina's 25 Niet gecategoriseerd
Bekijk de handleiding van Strymon Sunset gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
USER MANUAL
Version 1.2
Sunset- Dual Overdrive
®
pg 2
Controls and Connections – Front Panel
Read Before Using
• A
Toggles between 3 different
Drive circuits for the A effect.
Ge - A circuit combining
the softer response of
Germanium diodes with a
parallel path that blends in
the dry signal as the Drive is
lowered. At higher gains the
lower-mid-range frequencies
are emphasized to create a
tight, thick response.
texas - A single stage soft-
clipper configuration that
is filtered before and after
the gain stage to create
a smooth and dynamic
overdrive. Perfect for playing
the blues or just fattening up
your sound with a signature
mid-range bump.
treble - A clean boost that removes the low
frequencies as the Tone knob is turned up. Great for
tightening up an overdriven amp, or driving another
gain pedal that’s a bit looser on the low end.
• B
Toggles between 3 different
Drive circuits for the B effect.
2stage - The 2stage
overdrive combines a soft-
clipping stage followed by a
hard-clipping stage, creating
a complex overdrive with a
wide range of gain. Its EQ
structure preserves the
low end while adding some
muscle to push your amp.
This overdrive can easily take
you from lightly clipped to
beefy saturation.
hard - A single-stage hard-
clipping circuit that has a ton
of gain on tap, approaching
fuzz territory with the Drive
knob maxed. At lower gains,
mildly clipped transparent
tones are achieved.
JFET - A clean boost that subtly beefs up your signal
with the dynamics and response of a JFET front end.
As you turn up the drive, the signal gets rounded and
warmer.
This manual covers the feature set for Sunset pedals running version 1.2 firmware. To check if your
Sunset is running version 1.2 firmware, follow the instructions in the note at the bottom of page 17.
The User Manual for Sunset version 1.0 is available here.
Sunset version 1.2 adds the ability to remotely control your Sunset via a MIDI connection.
If you wish to install the latest update, go to strymon.net/firmwareupdate and follow the directions.
Sunset- Dual Overdrive
®
pg 3
Controls and Connections – Front Panel (cont.)
• A (footswitch)
Engages and bypasses the A channel.
RED LED on indicates that the effect is
engaged. Press and Hold the A footswitch
to save a preset that can be accessed with
an external Favorite switch or via MIDI.
• B (footswitch)
Engages and bypasses the
B channel. RED LED on
indicates that the effect is
engaged.
• DRIVE
Adjusts the amount of gain
applied to each channel.
• TONE
Adjusts the treble
frequencies for each
channel. The character and
response of the control vary
with the circuit type.
• LEVEL
Controls the output volume
of each channel.
Product specificaties
| Merk: | Strymon |
| Categorie: | Niet gecategoriseerd |
| Model: | Sunset |
Heb je hulp nodig?
Als je hulp nodig hebt met Strymon Sunset stel dan hieronder een vraag en andere gebruikers zullen je antwoorden