Strong 5 in 1 Handleiding

Strong Afstandsbediening 5 in 1

Lees hieronder de 📖 handleiding in het Nederlandse voor Strong 5 in 1 (18 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
www.strongsat.com
STRONG UNIVERSAL REMOTE CONTROL “5 in 1”
Thank you for purchasing the STRONG “5 in 1” Universal Remote Control.
The remote can operate up to 5 dierent devices: TV, VCR, DVD player and
2 satellite receivers or cable TV boxes. The remote is powered by 2 “AAA”
type 1.5 Volt batteries – not included in this packaging.
Easy set-up
1. Insert 2 new batteries into the back of the remote. Following the
markings in the battery compartment.
2. Switch “ON” the device you wish to operate (e.g. your TV).
3. Look for the brand name of the device you wish to control in the
attached CODE LIST at the end of this user-manual (e.g. TV: SONY).
4. Next to the brand name you will nd one or more 3-digit code numbers
(e.g. SONY: 028) which have to be entered in the following way:
5. Press and hold both the key and the appropriate device key , ,
, , on the remote until the LED turns ON and then release both
keys. Then enter the 3-digit code numbers by using the numeric keys.
The key-in time is 10 seconds (see point 4). (e.g. + + 028).
Use following device keys:
for your TELEVISION,
for your VIDEO RECORDER,
for your DVD-PLAYER,
for your SATELLITE RECEIVER – default setting for
STRONG SRT 6125, 6155, 6355
for your second device: SATELLITE RECEIVER / CABLE BOX.
If the code number you inserted is correct (present in the database) then
the LED light will turn OFF immediately. If this number does not exist then
the LED is still ON. The key-in time is 10 seconds, if any key is not pressed
within 10 seconds then the LED will turn OFF and the same procedure must
be followed again (points 4-5).
6. Aim your remote control at the selected device and press the
Power key. Your remote control is set up correctly if the device switches
OFF and ON. Then check if keys e.g. VOLUME -/+ or e.g. at VCR/DVD-
Player: key can be operated.
7. If your device does not react and/or operates incorrectly, repeat step 3
to step 6 by entering the next 3-digit-code from the list.
8. If the brand of your device is not shown in the code number list, or if
none of the digit codes operates your device properly, you can try the
“automatic search function” :
Automatic search function
1. Switch ON the selected device you would like to control: TV, VCR,
DVD-Player, STB 1 or STB2.
2. Press and hold both the key and the appropriate device key until
LED light is ON and then release both keys.
1
GB

Product specificaties

Merk: Strong
Categorie: Afstandsbediening
Model: 5 in 1

Heb je hulp nodig?

Als je hulp nodig hebt met Strong 5 in 1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Afstandsbediening Strong

Strong

Strong SRT R2000 Handleiding

19 Juni 2023
Strong

Strong 5in1 Handleiding

29 Mei 2023
Strong

Strong 5 in 1 Handleiding

26 September 2022

Handleiding Afstandsbediening

Nieuwste handleidingen voor Afstandsbediening

Sony

Sony RCP-3100 Handleiding

26 April 2024
Sony

Sony SRK-CP1 Handleiding

26 April 2024
Sony

Sony AP-1 Handleiding

26 April 2024
Sony

Sony CCU-D50P Handleiding

26 April 2024
Sony

Sony DSRM-10 Handleiding

26 April 2024
Insignia

Insignia NS-RCFNA-21 Handleiding

16 April 2024
Insignia

Insignia NS-RMT3D21 Handleiding

16 April 2024
Hegel

Hegel RC8 Handleiding

10 April 2024
PeakTech

PeakTech 2801 Handleiding

10 April 2024
Lutron

Lutron Pico Handleiding

8 April 2024