Streacom ZF240 Handleiding
Streacom
Computervoeding
ZF240
Bekijk gratis de handleiding van Streacom ZF240 (2 pagina’s), behorend tot de categorie Computervoeding. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 4.5 sterren uit 4.5 reviews. Heb je een vraag over Streacom ZF240 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
ZF240 Overview
The ZF240 has been specially designed to fit inside Streacom cases and utilize the heatsink of
the case in order to eliminate the need for fans and provide a totally silent solution.
Unlike traditional ATX PSU’s, the AC input socket is on a flexible cable and must be secured to
the back socket of the case. This allows the PSU more freedom when positioning it and
allows us to design cases that break the standard PC case mold.
The heatsink connector and various holes (marked in red) on both of its sides in order to
mount to different cases in different orientations, but should always be mounted to the case
heatsink.
1
Remove the screws and nuts from the IEC Socket
Prepare the ZF240 for installation to the case by removing the 2 screws and nuts pre-installed
in the IEC socket. This will allow you to fit the socket to the case back panel
2
Prepare the case for installation
All compatible cases have a DC Jack Mounting Plate installed over the IEC socket in order to
allow for the NanoPSU jack. When using the ZF240, this plate will need to be removed in
order to fit the IEC Socket. This is done by removing the 2 screws which secure the plate to
the back panel.
3
A Message from the Streacom Team
Thank you for choosing Streacom! In a market dominated by generic and uninspired products, we
are on a mission to break the mold, not only of design, but materials and finish. This is a value that
is not easily conveyed in an industry preoccupied with specs and numbers, so your choice shows an
appreciation and understanding of what makes our products different, and we sincerely thank you
for that.
Every care has been taken to ensure that this product meets the highest quality and standards we
have defined. If anything about this product falls short of your expectations or you have any
questions that are not covered in this user guide, please contact us online at
www.streacom.com/contact. We respond to every question received and your feedback is a
critical part of our ongoing product development and refinement.
From everyone at Streacom, we hope that you enjoy using our product!
Specification
Power Output
Input Voltage Range
Output Connectors
Input Connector
Input Cable Length
Output Cable Length
Dimensions
Compatible Cases
Net Weight
240W Total Combined Power:
3.3V @ 10A, 5V @ 10A, 5VSB @ 2A, 12V @14A, -12V @ 0.3A
100-240V AC 50/60Hz
1 x 20+4 ATX, 1 x 4PIN CPU, 2 x SATA, 2 x MOLEX, 1 x FDD
IEC C14 Socket
150mm
400mm
139 x 86 x 47mm (LxWxH)
FC5 Evo* & FC5 Alpha*, FC9** & FC9 Alpha**,
FC10* & FC10 Alpha*
848g
IEC C14 Socket
1 x Berg (Floppy) Connector
Aluminium
PSU Enclosure
2 x 4PIN Molex Connector
2 x SATA Connector
1 x 4PIN ATX Connector
Heatsink Connector
1 x 20+4PIN
ATX Connector
*Micro-ATX Only
** Mini-ITX Only
CS-M3x8
DC Jack Mounting Plate
CS-M3x4
Fitting the IEC Socket (Newer Generation Cases)
With the DC Jack Mounting Plate removed, fit the IEC socket through the opening from
the inside of the case, then secure it to the back panel using the screws and nuts
originally fitted to the IEC socket. Note that the screws fit from the OUTSIDE of the
case and the nuts fit in the IEC socket.
4a
Fitting the IEC Socket (Older Generation Cases)
With the DC Jack Mounting Plate removed, fit the IEC socket to the back panel from the
inside of the case and secure it from the inside using the original screws holding the DC Jack
Mounting Plate in place. Note that the screws fit from the INSIDE of the case and the socket
does NOT fit through the opening but instead sits flat against the inside of the back panel.
4b
Fit the ZF240 to the case heatsink
The ZF240 secures to the case using the 3 hex screws supplied and fixes directly to the
heatsink. Place the ZF240 against the side of the case and adjust the position until the holes in
the heatsink connector align with the holes in the case heatsink. Note that thermal paste is
NOT required when fitting the ZF240.
5
Connect all the cables
With the ZF240 and all other components fitted, connect the motherboard and peripheral
hardware to the PSU. Finally, connect the mains cable to the IEC socket and power up your
system.
6
Important Notice
IMPORTANT NOTICE
Passively cooled products can get hot to the touch, especially when systems are running at high loads for
extended periods. This is a normal part of their operation and they have been tested to run safely under
these conditions. Please take their operational temperature into consideration when positioning and handling.
Designed in Europe. Made in China. Copyright © 2014 Streacom. All Rights Reserved.
COPYRIGHT NOTICE
Copyright © 2014 Streacom. All Rights Reserved. No part of this publication may be reproduced, stored in
a retrieval system, or transmitted, in any form or in any means – by electronic, mechanical, photocopying,
recording or otherwise – without prior written permission. All trademarks and registered trademarks in this
publication are the property of their respective owners. Streacom is a registered trademark.
HC-M3x8
Product specificaties
| Merk: | Streacom |
| Categorie: | Computervoeding |
| Model: | ZF240 |
Heb je hulp nodig?
Als je hulp nodig hebt met Streacom ZF240 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Computervoeding Streacom
2 Mei 2025
Handleiding Computervoeding
- Mini-Box
- Enermax
- StarTech.com
- Planet
- Thermaltake
- Bicker Elektronik
- FSP/Fortron
- Steren
- Zalman
- ADATA
- Allied Telesis
- Xilence
- Adj
- Zippy
- Antec
Nieuwste handleidingen voor Computervoeding
15 Juni 2025
14 Mei 2025
13 Mei 2025
13 Mei 2025
11 Mei 2025
8 Mei 2025
7 Mei 2025
7 Mei 2025