Storex DNR-30H Network Camera Handleiding

Bekijk gratis de handleiding van Storex DNR-30H Network Camera (2 pagina’s), behorend tot de categorie Beveiliging. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.0 sterren uit 5 reviews. Heb je een vraag over Storex DNR-30H Network Camera of wil je andere gebruikers van dit product iets vragen? Stel een vraag

To begin setup, insert the installation CD into your CD-ROM

drive, and the iWizard will start automatically.

- If it doesn’t, browse the contents of the CD and run the ‘iWizard.exe’.

- If you have no CD-ROM drive, please use this link to download

software installation: http://ipcam.storex.eu

- Select your language [Next]. Then choose IP camera to set up [ok]

Step 1 shows how to connect cables [Next]. Check the LED statut [Next].

Step 2 iWizard scan for available cameras on your local network.

- Select a camera and wait until the live video appears on the right.

(You can check Current settings with the camera's bottom sticker).

-You can verify FW versions from: http://ipcam.storex.eu

Click [Next] when you’re ready. Meanwhile, if you see the

Windows Security Alert dialog box during the search, please

choose [Unblock].

The default password is "admin". If you need you can change it

(please note down your new password).

Click [Next] to skip this process.

Check the camera name, date and time setting.

Package Contents

Please check the package contents. If anything is missing, please don’t

hesitate to contact your local distributor.

Network cameraRJ-45 LAN cable

Power adaptor (12V, 2A) & cableQuick start guide

Installation CDWall mount plate

Screw for ceiling mount x 3,

screw anchor x 3, camera pad x4

Connecting the Cables

LAN cable from PC to hub/router: If your LAN cable from PC has

been connected to the Cable/ADSL modem, please re-connect it

to the LAN port of your hub/router.

LAN port on camera: Use the bundled RJ-45 LAN cable to connect

the LAN port of the IP camera to the LAN port of your hub/router.

Wireless adaptor (optional accessory): If you have purchased the

Storex USB wireless adaptor, plug it into the USB port of IP camera

for wireless reception. it can only supports the wireless adaptors

from Storex; please do not use other USB adaptors on Storex IP

camera.

Power: Attach the power adaptor to the camera’s power connector

and connect the power plug to a power outlet.

Camera Layout

IR LEDs x 6 (12 in total)

Light sensor

Lens

IR LEDs x 6 (12 in total)

Microphone

LED status indicator

USB Wireless adaptor connector

Power connector

Ethernet port

I/O box connector

Audio output

microSD/SDHC card slot

Reset button

Microphone input

*

Do not rotate your PTZ camera manually as it may damage it

Network Camera

Quick Installation Guide

Video Installation:

http://installipcam.storex.eu

Mounting the Camera

Fix the mounting plate.

Let fastening bracket slide into its position on the camera base (as circled).

Attach the IP camera.

Push and hold the bracket to the right.

Loosen the screw that xes the trapezoid-shaped fastening

bracket

Tighten the screw on the fastening bracket.

DNR-30H

Installing Camera Software

Product specificaties