Stihl FS 80 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Stihl FS 80 (122 pagina's) in de categorie Grasmaaier. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/122
Instruction Manual
Manual de instrucciones
STIH)
STIHL FS 80, 85
Warning!
Read and follow all safety precautions in
Instruction Manual – improper use can cause
serious or fatal injury.
Advertencia!
Lea y siga todas las precauciones de
seguridad dadas en el manual de
instrucciones – el uso incorrecto puede
causar lesiones graves o mortales.
1FS 80, FS 80 R, FS 85, FS 85 R
English / USA
BA_SE_039_010_01_19.fmPrinted on chlorine-free paper.
Printing inks contain vegetable oils; paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 200 8
0458 393 8621. M . . CP. Printed in USA 10 D8
STIHl
Contents
Guide to Using this Manual .............. 2
Safety Precautions and
Working Techniques ......................... 3
Approved Combinations of
Cutting Tool, Deflector,
Handle and Harness ....................... 20
Approved Power
Tool Attachments ............................ 22
Mounting the Bike Handle .............. 22
Adjusting the Throttle Cable ........... 24
Mounting the Loop Handle ............. 24
Fitting the Carrying Eye .................. 26
Mounting the Deflector ................... 26
Mounting the Cutting Tools ............. 27
Fuel ................................................ 31
Fueling ............................................ 32
Fitting the Harness ......................... 33
Balancing the Brushcutter .............. 33
Starting / Stopping
the Engine ...................................... 35
Operating Instructions .................... 38
Cleaning the Air Filter ..................... 38
Motor Management ........................ 39
Adjusting the Carburetor ................ 39
Spark Arresting Screen
in Muffler ........................................ 41
Checking the Spark Plug ................ 41
Lubricating the Gearbox ................. 42
Replacing the Starter Rope
and Rewind Spring ......................... 42
Storing the Machine ....................... 45
Sharpening
Metal Cutting Tools ......................... 45
Maintenance Chart ......................... 47
Parts and Controls ......................... 49
Specifications ................................. 51
Special Accessories ....................... 52
Maintenance and Repairs .............. 53
STIHL Incorporated
Federal Emission Control
Warranty Statement ........................ 54
STIHL Incorporated
California Exhaust and
Evaporative Emissions Control
Warranty Statement ........................ 56
Trademarks .................................... 58
Allow only persons who understand this
manual to operate your trimmer/
brushcutter.
To receive maximum performance and
satisfaction from your STIHL trimmer/
brushcutter, it is important that you read
and understand the maintenance and
safety precautions, starting on page 3,
before using your trimmer/brushcutter.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
!Warning!
Because a trimmer/brushcutter is a high-
speed cutting tool some special safety
precautions must be observed to reduce
the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury. Make sure
your unit is equipped with the proper
deflector, handle and harness for the
type of cutting attachment being used.
Always wear proper eye protection.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improve-
ments are made from time to time. If the
operating characteristics or the appear-
ance of your trimmer/brushcutter differs
from those described in this manual,
please contact your STIHL dealer for
information and assistance.
2
English / USA
FS 80, FS 80 R, FS 85, FS 85 R
Pictograms
All the pictograms attached to the
machine are shown and explained in
this manual.
The operating and handling instructions
are supported by illustrations.
Symbols in text
The individual steps or procedures
described in the manual may be marked
in different ways:
:A bullet marks a step or procedure
without direct reference to an
illustration.
A description of a step or procedure that
refers directly to an illustration may
contain item numbers that appear in the
illustration.
Example:
Loosen the screw (1)
Lever (2) ...
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
symbols described below:
Warning where there is a risk of an
accident or personal injury or
serious damage to property.
Caution where there is a risk of
damaging the machine or its
individual components.
Note or hint which is not essential
for using the machine, but may
improve the operator’s under-
standing of the situation and result
in better use of the machine.
Note or hint on correct procedure in
order to avoid damage to the
environment.
Equipment and features
This instruction manual may refer to
several models with different
features. Components that are not
installed on all models and related
applications are marked with an
asterisk (*). Such components may
be available as special accessories
from your STIHL dealer.
Engineering improvements
STIHL’s philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. If the
operating characteristics or the
appearance of your machine differ from
those described in this manual, please
contact your STIHL dealer for
assistance.
Therefore some changes, modifications
and improvements may not be covered
in this manual.
Guide to Using this Manual


Product specificaties

Merk: Stihl
Categorie: Grasmaaier
Model: FS 80

Heb je hulp nodig?

Als je hulp nodig hebt met Stihl FS 80 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Grasmaaier Stihl

Handleiding Grasmaaier

Nieuwste handleidingen voor Grasmaaier