STI -9102 Handleiding

Bekijk gratis de handleiding van STI -9102 (1 pagina’s), behorend tot de categorie Thermostaat. Deze gids werd als nuttig beoordeeld door 42 mensen en kreeg gemiddeld 4.1 sterren uit 5 reviews. Heb je een vraag over STI -9102 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION OF STI-9102 THERMOSTAT COVER

All specifications and information shown were current as of publication, and are subject to change without notice.

9102 DEC2022

CLEANING INSTRUCTIONS

To clean cover, remove from wall. Rinse with watero remove abrasive dust and t

dirt. Wash with soap or mild detergent using a soft cloth (DO NOT SCRUB).Rinse

once more, then dry with a soft cloth or chamois. To remove grease or wet paint,

rub gently with a cloth wetted thoroughly with naphtha. Then wash and rinse.

DO NOT USE RAZOR BLADES.

INSTALLATION INSTRUCTIONS

1.Do not remove thermostat. Prior to drilling anchor holes, cover thermostat with a

damp cloth to prent dust from penetrating the sensor.ev

2.Center frame over existing thermostat.Mark and drill (4) anchor holes using a 1/4

in. (6.3mm) drill bit.Insert the (4) anchors and complete installation as shown.

NOTE: The (3) tabs on the frame must face upward (View A).

3.Insert the (3) slots on the cover over tabs on the top surface of frame.Rotate cover

downward onto the frame and turn key to lock.

Toll Free: 800-888-4784 • E-mail: [email protected]

Web: www.sti-usa.com

USA - Headquarters

2306 Airport Road • Waterford, Michigan 48327-1209

Phone: 248-673-9898 • Fax: 248-673-1246

Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999

E-mail: [email protected] • Web: www.sti-emea.com

European Office

Taylor House • • 34 Sherwood RoadBromsgrove

Worcestershire • B60 3DR • England

3.54 in

[89.8 mm]

3.54 in

[89.9 mm]

1.43 in

[36.4 mm]

0.11 in

[2.8 mm]

4.17 in

[106.0 mm]

4.17 in

[106.0 mm]

0.21 in

[5.5 mm]

ø

ø

Product specificaties