Steinberg 4Knob Rain Handleiding
Steinberg
Niet gecategoriseerd
4Knob Rain
Bekijk gratis de handleiding van Steinberg 4Knob Rain (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 3.8 sterren uit 10 reviews. Heb je een vraag over Steinberg 4Knob Rain of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
4Knob Rain Manual
The 4Knob Rain is the third release of SampleTekk’s new and approved approach to sampled pianos.
Its four sounds and 88 presets provide you with a fast way of getting the sound you want for your
production. The four sounds and all presets in 4Knob Rain are produced by SampleTekk’s Grammy
winner and several times Grammy nominee, Niklas Flyckt. During production several exclusive,
vintage and very sought-after hardware was used, such as:
• Fairman TMEQ
• RCA BA-25A
• MXR Doubler
• Roland Dimension D
For the Reverb channel HALion’s built in REVerence is used, but with SampleTekk’s custom made
impulses made from different hardware reverb units, Spring reverb, plates and digital units. Some
of the impulses consists of a combination of several reverb types.
The Interface
The four main controls are where you set the blend. You can also mute and solo each sound.
Tip: When muting the sound, those samples are not triggered, so if you don’t use a particular sound,
rather than just pulling down the volume to zero, press the mute-button.
•Direct – The original piano signal
•Attitude
•Modulation
•Reverb
This is what you will see if you click the “Extended” button in the upper right corner of the control
panel:
From left to right:
•HB Volume — sets the volume of the hammerback sound (this is when the mechanics on the
piano return after releasing a key)
•Pedal Volume — sets the volume of the sustain pedal being pressed and released
•Sensitivity — turn clockwise to emphasises the higher velocities, counterclockwise for a
more mellow playing. This control is neutral when in 12 o’clock position
•Pre Delay — sets the pre delay of the reverb channel
•Size — sets the size of the reverb
•Time — sets the time of the reverb
•Ambience — sets the amount of room acoustic
•R — Turn on or off the Repedaling function. With this on, you can repeat sustain notes by
pressing down the sustain pedal directly after you have released it. In some occasions, you
might want to turn this off for a tighter sound
Product specificaties
| Merk: | Steinberg |
| Categorie: | Niet gecategoriseerd |
| Model: | 4Knob Rain |
Heb je hulp nodig?
Als je hulp nodig hebt met Steinberg 4Knob Rain stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Steinberg
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
Handleiding Niet gecategoriseerd
- Vogels
- Schoeps
- Seymour Duncan
- Supermicro
- Ergobaby
- OP/TECH
- Adidas
- Hanseatic
- Krups
- Solac
- Racktime
- Triumph Sports
- Alpina
- Blade
- Greenworks
Nieuwste handleidingen voor Niet gecategoriseerd
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025