Steinberg 4Knob PopD Handleiding
Steinberg
Niet gecategoriseerd
4Knob PopD
Bekijk gratis de handleiding van Steinberg 4Knob PopD (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 32 mensen en kreeg gemiddeld 3.8 sterren uit 16.5 reviews. Heb je een vraag over Steinberg 4Knob PopD of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
Pop D Manual
The 4 Knob Pop D is SampleTekk’s new and approved approach to sampled pianos. Its four sounds
and 88 presets provides you with a fast way of getting the sound you want for your production. The
four sounds and all presets in 4Knob Pop D are produced by SampleTekk’s Grammy winner and
several times Grammy nominee, Niklas Flyckt. During production several exclusive, vintage and very
sought-after hardware was used, such as:
•Telefunken ELAM 271
•Neumann M250
•Coles 4038
•Fairman TMEQ
•RCA BA-25A
•MXR Doubler
•Roland Dimension D
For the Reverb channel HALions built in REVerence is used, but with SampleTekk’s custom made
impulses made from different hardware reverb units, Spring reverb, plates and digital units. Some
of the impulses consists of a combination of several reverb types.
The Interface
The four main controls is where you set the blend. You can also mute and solo each sound.
Tip: When muting the sound, those samples are not triggered, so if you don’t use a particular sound,
rather than just pulling down the volume to zero, press the mute-button.
•Direct – The original piano signal
•Attitude
•Modulation
•Reverb
This is what you will see if you click the “Extended” button in the upper right corner of the control
panel:
From left to right:
•HB Volume — sets the volume of the hammerback sound (this is when the mechanics on the
piano return after releasing a key)
•Pedal Volume — sets the volume of the sustain pedal being pressed and released
•Sensitivity — turn clockwise to emphasis the higher velocities, counterclockwise for a more
mellow playing. This control is neutral when in 12 o’clock position
•Pre Delay — sets the pre delay of the reverb channel
•Size — sets the size of the reverb
•Time — sets the time of the reverb
•Ambience — sets the amount of room acoustic
•R — Turns on and off the Repedaling function. With this on, you can repeal sustain notes by
pressing down the sustain pedal directly after you have released it. In some occasions, you
might want to turn this off for a tighter sound
Product specificaties
| Merk: | Steinberg |
| Categorie: | Niet gecategoriseerd |
| Model: | 4Knob PopD |
Heb je hulp nodig?
Als je hulp nodig hebt met Steinberg 4Knob PopD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Steinberg
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
Handleiding Niet gecategoriseerd
- Campomatic
- REDARC
- AJA
- Medeli
- Maze
- MyAVR
- Wonky Monkey
- Nubert
- Eissound
- Fagor
- Deltaco
- Anybus
- CradlePoint
- LG
- Primus
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025