StarTech.com US1GC30SFP Handleiding

Bekijk gratis de handleiding van StarTech.com US1GC30SFP (2 pagina’s), behorend tot de categorie Netwerkkaart/adapter. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.9 sterren uit 7 reviews. Heb je een vraag over StarTech.com US1GC30SFP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 11/27/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/US1GC30SFP

Package contents

• 1 x network adapter

• 1 x quick-start guide

Requirements

• USB-enabled computer with an available USB 3.0 Type-C™ port

• Any of the following operating systems:

• Microsoft Windows® 10, 8/8.1, 7

• Microsoft Windows Server® 2012, 2008, 2003

• macOS High Sierra (10.13), Sierra (10.12) El Capitan (10.11),

Yosemite (10.10), Mavericks (10.9), Mountain Lion (10.8)

• Linux® kernel 3.5 to 4.11.x, LTS versions only

• 1Gb SFP transceiver with your desired network connection

Operating system requirements are subject to change. For the latest

requirements, please visit www.StarTech.com/US1GC30SFP.

US1GC30SFP

USB-C to GbE Network Adapter - Open SFP

*actual product may vary from photos

Product diagram

Link and activity LED

SFP slot

Built-in USB-C™ cable

(USB 3.0)

Installation

Notes:You may need to restart your computer during the software

installation process. Be sure to save any unsaved material before you

install the software.

1. Insert your 1Gb SFP transceiver into the SFP slot on the card.

2. Connect a network interface cable to the SFP transceiver and to

your network.

3. Connect the built-in USB-C cable on the network adapter to a USB

3.0 Type-C port on your computer.

Note: If the driver for the network adapter installs automatically,

the installation is complete. If the driver does not install

automatically, you’ll need to manually install the driver. Follow the

instructions below for your specic operating system.

Windows

1. If the Found New Hardware dialog box appears on your screen,

close the dialog box or click Cancel.

Note: Once the network adapter is connected to the computer,

if no existing drivers are found, it will load a CD-ROM device that

contains an executable le that you can use to install the driver.

2. After the CD-ROM device nishes loading, run the installation le.

3. Complete the on-screen instructions to nish the installation.

Note:You can also download the latest software from the

StarTech.com website,

www.StarTech.com/US1GC30SFP.

macOS

1. Download the latest macOS drivers from the StarTech.com

website,

www.StarTech.com/US1GC30SFP.

2. The drivers will be compressed in a .zip folder, extract the

contents of that folder to a location on your computer that’s easy

to access, such as your . Desktop

3. Double-click the appropriate installer le for the version of macOS

that you’re running, and follow the on-screen instructions to

complete the installation.

Power LED

Product specificaties