StarTech.com SV431DVGAU2A Handleiding

Bekijk gratis de handleiding van StarTech.com SV431DVGAU2A (2 pagina’s), behorend tot de categorie Csavaros gép. Deze gids werd als nuttig beoordeeld door 62 mensen en kreeg gemiddeld 4.2 sterren uit 2 reviews. Heb je een vraag over StarTech.com SV431DVGAU2A of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Manual Revision: 12/01/2023

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Quick Start Guide

Packaging Contents

• 1 x dual VGA USB KVM switch

• 1 x universal power adapter (NA/UK/EU/AU)

• 4 x rubber feet

• 1 x instruction manual

System Requirements

• 1 or 2 VGA monitors (monitor, projector, TV, etc.)

• A USB keyboard and mouse

• Microphone and speakers (optional)

SV231DVGAU2A / SV431DVGAU2A

2 / 4 Port Dual VGA USB KVM Switch with Audio & USB Hub

*actual product may vary from photos

Please visit www.startech.com/SV231DVGAU2A or www.startech.com/

SV431DVGAU2A for product specications.

LED Indicators

PC Selection Indicators

Green: Connected PC detected

(powered on)

Red: Active PC

O: No PC detected

Installation

For complete operating instructions / specications, please

visit www.startech.com/SV231DVGAU2A or www.startech.com/

SV431DVGAU2A.

Note: Prior to installation, please power o all devices that will be

connected to this system.

1. Connect 1 or 2 VGA monitors to the console connectors on the

back of the KVM switch.

2. Connect a USB keyboard and mouse into the marked USB ports

on the KVM switch.

3. (Optional) Connect a microphone and set of speakers to the

console audio ports.

4. (Optional) Connect your additional USB peripherals to the USB

hub ports.

Operation

Switching Between Systems

Pushbuttons

For the 2 port (SV231DVGAU2A) version, the front button will toggle

between the two computers when pressed.

For the 4 port (SV431DVGAU2A) version, each button on the front

panel associates with a connected computer for selection.

Hotkeys

A hotkey command is a short keyboard sequence for selecting

a computer, activating a computer scan, etc. A hotkey sequence

starts with two Left Ctrl keystrokes, pressed within and 0.2 seconds

followed by one or two keystrokes to complete the command.

A built-in buzzer generates a high-pitched beep for correct hotkey

commands; otherwise, one low-pitch beep occurs to indicate errors

and the bad key sequence won’t be forwarded to the selected

computer.

Note: To disable hotkey functions, press and hold Left Shift and press

Num Lock twice, then release followed by pressing ShiftLeftCtrl

once.

5. Connect a male-to-male VGA cable from the VGA port on your

computer to the PC1 VGA port. Repeat for the secondary display

if needed.

6. Connect a USB A-B cable from an available port on your

computer to the PC1 USB port.

7. (Optional) Connect a 3.5 mm audio cable from your computer to

the PC1 audio ports.

8. Repeat steps 5 to 7 for the other PC connections.

Product specificaties