StarTech.com ST2GPEX Handleiding

Bekijk gratis de handleiding van StarTech.com ST2GPEX (2 pagina’s), behorend tot de categorie Netwerkkaart/adapter. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.0 sterren uit 9 reviews. Heb je een vraag over StarTech.com ST2GPEX of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: November 12, 2021

Product Diagram (ST2GPEX)

Port/LED/

Connector

Function

1Bracket• Both Low-Prole and Full-Height Brackets are included

2

Link/Activity LED

Indicators

• Indicates Link Speeds

• Top is Solid Green = 2.5Gbps LinkLED Indicator

• Top is Flashing Green = 2.5Gbps ActivityLED Indicator

• Bottom is Solid Green = LED Indicator

1Gbps/100Mbps/10Mbps Link

• Bottom is Flashing Green = LED Indicator

1Gbps/100Mbps/10Mbps Activity

3Ethernet Port

• Used to connect a to the Network CableNetwork

Card

4

PCIe p1-x1

Connector

• Insert into a PCI Express Slot

1 Port PCI Express 2.5Gbps NBase-T Ethernet Network Card

Requirements

For the latest requirements, please visit .www.startech.com/ST2GPEX

• Computer with an available PCI Express Slot (x1, x4, x8, or x16)

Installation

Install the PCI Express Card

WARNING!

PCI Express Cards can be severely damaged by static electricity. Make sure that

you are properly grounded before you open your or touch the Computer CasePCI

Express CardAnti-Static Strap . You should wear an when you install any computer

component. If an isn’t available, discharge any built-up static Anti-Static Strap

electricity by touching a large for several seconds. Only Grounded Metal Surface

handle the by its edges and don’t touch the gold connectors.PCI Express Card

1. Turn o your and any that are connected to it (for Computer Peripheral Devices

example, , , etc.).PrintersExternal Hard Drives

2. Unplug the from the back of your .Power Cable Computer

3. Disconnect any that are connected to your .Peripheral Devices Computer

4. Remove the from your . Consult the documentation that Cover Computer Case

came with your for details about how to do this safely.Computer

5. Locate an open and remove the corresponding PCI Express SlotSlot Cover Plate

from the back of your . Consult the documentation that came with Computer Case

your for details about how to do this safely. This card works in PCI Express Computer

x1, x4, x8, or p1-x16 slots.

6. Gently insert the into the open and fasten the PCI Express CardPCI Express Slot

BracketComputer Case to the back of the .

Note: If you install the into a or a PCI Express Card Small Form Factor Low-Prole

Desktop SystemFull-, it may be necessary to replace the pre-installed standard

Height Bracket Low-Prole Bracketwith the included .

7. Return the back onto your .CoverComputer Case

8. Reconnect the to the back of your .Power CableComputer

9. Reconnect all of the that were disconnected in step 3.Peripheral Devices

10. Turn on your and .ComputerPeripheral Devices

4

3

1

2

Product specificaties