StarTech.com ST10GSPEXNDP Handleiding

Bekijk gratis de handleiding van StarTech.com ST10GSPEXNDP (2 pagina’s), behorend tot de categorie Netwerkkaart/adapter. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.5 sterren uit 2 reviews. Heb je een vraag over StarTech.com ST10GSPEXNDP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: December 10, 2018 1:22 PM

Product Diagram (ST10GSPEXNDP)

Port/LEDFunction

1Link Speed LED

• Solid Amber: Link speed is 10G.

• Solid Green:Link speed is 1G.

• O: Link speed is 100G.

2Ethernet Port• Used to connect a .Network Device

3Link State LED/

Activity LED

• The is connected Solid Green: Network Card

to a network.

• Indicates activity.Flashing:

4PCIe p1-x8 Connector• Used to connect the to a Network Card

Computer.

Requirements

For the latest requirements and full manual, please visit www.startech.com/

ST10GSPEXNDP.

• PCI Express enabled computer with an available PCI Express slot (x8 or x16)

• Operating systems:

• Microsoft® Hyper-V®

• Windows® 7, 8, 8.1, 10

• Windows Server® 2003, 2008 R2, 2012

• Linux® kernel 2.6.x and 3.x

Dual-Port 10GBase-T / NBase-T Ethernet Network Card | PCI Express

1

Installation

Installing the Network Card

Note: Network cards can be severely damaged by static electricity. Make sure that

you’re properly grounded before you open your computer case or touch the PCIe card.

1. Turn o the and any connected (e.g. printers, etc.).Computer Devices

2. Disconnect any connected and unplug the power cable from the Devices

Computer.

3. Open the . For more information, consult the user manual that came Computer Case

with the .Computer

4. Locate a (x8 or x16) and remove the corresponding metal cover PCI Express Slot

plate from the back of the . Computer Case

5. Gently insert the on the into the PCIe p1-x8 ConnectorNetwork CardPCI Express

Slot Computer.(x8 or x16) on the

6. Use a to fasten the on the to the Computer Case ScrewBracketNetwork Card

back of the .Computer Case

7. Place the cover back onto your . Computer Case

8. Reconnect all and and turn the back on.Cables DevicesComputer

Installing the Driver

1. On the pop-up, click the button.Found New HardwareCancel

2. Using a web browser, navigate to . www.startech.com/ST10GSPEXNDP

3. On the page, click the tab located in the middle of the screen.Product Support

4. In the section, click on the driver link that corresponds with Drivers and Downloads

the operating system running on the .Host Computer

5. Once the download is complete, extract the contents of the .ZIP le.

6. Click the appropriate driver for the version of operating system that you are running

and follow the on-screen prompts to complete the installation.

2

3

4

Product specificaties