StarTech.com PM1115U2 Handleiding

StarTech.com Printserver PM1115U2

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com PM1115U2 (2 pagina's) in de categorie Printserver. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Quick start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 07/03/2015

For the latest information, technical specications, and support for

this product, please visit www.startech.com/PM1115U2.

Packaging contents

• 1 x USB 2.0 network LPR print server

• 1 x universal power adapter (NA/UK/EU/AU)

• 1 x RJ45 network cable

• 1 x driver CD

• 1 x quick start guide

System requirements

A computer running one of the following operating systems:

• Windows® 7 (32-bit or 64-bit)

• Windows 8 (32-bit or 64-bit)

• Windows 8.1 (32-bit or 64-bit)

• Windows Server® 2003

• Windows Server 2008

• Windows Server 2012

• Windows® XP

• Mac OS 10.7 and later (tested up to 10.10)

Operating system requirements are subject to change. For the latest

requirements, please visit www.startech.com/PM1115U2.

PM1115U2

10/100 Mbps Ethernet to USB 2.0 Network LPR Print Server

*actual product may vary from photos

Product diagram

Front view

Power jack

Link LED RJ45 Ethernet port Activity LED

Power LED

Rear view

USB type-A port

Hardware installation

Connect a printer to the print server

1. Turn o the printer that you want to connect to the print server.

2. Connect one end of a USB 2.0 cable (not included) to the printer

and the other end of the cable to the USB type-A port on the print

server.

3. Turn on the printer.

4. Plug one end of the universal power adapter into the power jack

on the back of the print server and the other end into a power

source. The power LED (green) illuminates to indicate that the

print server is turned on.

When the print server is connected correctly to the network, the link

LED (green) illuminates.

Software installation

Install the software on a computer running a version

of Windows OS

1. Connect an Ethernet cable to the RJ45 Ethernet port on the print

server and then to your router or network.

2. On the computer that’s connected to the same router or network,

insert the provided CD into the CD or DVD drive.

3. In the AutoPlay message, click Networking Printer Wizard and

follow the on-screen instructions.

4. Click the Network Printer Wizard shortcut on your desktop.

5. When prompted, install the drivers for the printer.

When the wizard is complete, the printer is ready to be used.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

About the LED indicators

PM115U2 includes three LEDs. See the tables below for more

information about what the LED behaviors signify.

Power LED

LED behavior Signies

LED is illuminated The print server is turned on and

receiving power.

LED isn’t illuminated or

is blinking

An error is occurring with the

print server or the power adapter.

RJ45 LEDs

LED behavior Signies

Link LED (green) is illuminated The print server is connected to

the network.

Link LED (green) isn’t

illuminated

The print server isn’t connected

to the network.

Activity LED (yellow)

is blinking

Activity is occurring on the

network.

Reset to the default factory settings

1. To reset the print server to the default factory settings, while the

print server is turned on, insert a small pin or paperclip into the

Reset hole located on the right side of the print server.

2. Press and hold the button for 10 seconds.Reset

3. Unplug the power adapter from the power source and plug it in

again.

The print server should restart and operate using the default factory

settings.

Product specificaties

Merk:	StarTech.com
Categorie:	Printserver
Model:	PM1115U2
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht:	60 g
Breedte:	52 mm
Diepte:	55 mm
Hoogte:	25 mm
Gewicht verpakking:	326 g
Breedte verpakking:	149 mm
Diepte verpakking:	215 mm
Hoogte verpakking:	54 mm
LED-indicatoren:	Activity, Link, Power
Gebruiksaanwijzing:	Ja
Stroom:	0.3 A
Meegeleverde kabels:	LAN (RJ-45)
Afmetingen verpakking (BxDxH):	140 x 210 x 53 mm
Aantal USB 2.0-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	CE, FCC
Aansluiting voor netstroomadapter:	Ja
Duurzaamheidscertificaten:	RoHS
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Netwerkstandaard:	IEEE 802.3, IEEE 802.3u
Temperatuur bij opslag:	0 - 40 °C
Intern:	Nee
Power LED:	Ja
Ondersteunde netwerkprotocollen:	LPR
Web-gebaseerd management:	Ja
Externe adapter:	Nee
Koperen ethernetbekabelingstechnologie:	10BASE-T, 100BASE-TX
Chipset:	EST2862B
Overdrachtssnelheid:	100 Mbit/s
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Netwerkconnectietype:	Ethernet LAN