StarTech.com HDBOOST4K2 Handleiding

StarTech.com AV extender HDBOOST4K2

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com HDBOOST4K2 (2 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: July 4, 2019

Product Diagram (HDBOOST4K2)

Front View

Rear View

Side View

HDMI® Signal Booster and Extender - 4K 60Hz

Component Function

1HDMI Input Port • Connect an HDMI Source Device

2HDMI Output Port • Connect an HDMI Display Device

3Micro USB Power Port

• Connect the to the Micro USB Cable HDMI

Signal Booster and Extender USB and a

Power Source when there is no signal

or an intermittent signal on your HDMI

Display Device

Requirements

For the latest requirements, please visit . www.startech.com/HDBOOST4K2

• HDMI Source Device x 1

• HDMI Display Device x 1

• HDMI Cables x 2

Notes: It is recommended that you use when connecting Premium HDMI Cables

Devices HDMI Signal Booster and Extender to the .

To achieve a full 4K60Hz image, it is recommended that no Premium HDMI Cables

longer than 7m on the and 7m on the ends are used.HDMI Input HDMI Output

• (Optional) USB Power Source x 1

Installation and Operation

1. Ensure all of the are powered .Devices O

2. Connect an to the on the and HDMI Cable HDMI Output Port HDMI Source Device

to the on the . HDMI Input Port HDMI Signal Booster and Extender

3. Connect an to the on the HDMI Cable HDMI Output Port HDMI Signal Booster

and Extender HDMI Input Port HDMI Display Device and to the on the .

4. Power all of the .On Devices

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Product specificaties

Merk:	StarTech.com
Categorie:	AV extender
Model:	HDBOOST4K2
Kleur van het product:	Zwart
Gewicht:	15 g
Breedte:	52 mm
Diepte:	28.5 mm
Hoogte:	13.7 mm
Gewicht verpakking:	113 g
Breedte verpakking:	140 mm
Diepte verpakking:	170 mm
Hoogte verpakking:	30 mm
Soort:	AV-repeater
USB-connectortype:	Micro-USB B
Maximum resolutie:	3840 x 2160 Pixels
Meegeleverde kabels:	USB
Snelstartgids:	Ja
Aantal USB-aansluitingen:	1
Certificering:	REACH, CE, FCC
HDCP:	Ja
Maximale refresh snelheid:	60 Hz
Materiaal:	Kunststof
HDMI versie:	2.0
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-10 - 80 °C
Rack-montage:	Nee
Audio-uitgangskanalen:	7.1 kanalen
Stroomvoorziening via USB:	Ja
HDMI in:	1
HDCP versie:	2.2
Bandbreedte:	18 Gbit/s
Aantal HDMI-uitgangen:	1
(Buitenste) hoofdverpakking hoogte:	340 mm
(Buitenste) hoofdverpakking breedte:	530 mm
(Buitenste) hoofdverpakking lengte:	550 mm
Hoeveelheid per (buitenste) hoofdverpakking:	100 stuk(s)
Maximaal bereik:	14 m
Stroomverbruik (typisch):	2.5 W
Bedrijfstemperatuur (T-T):	0 - 70 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 90 procent
Doorgelust:	Nee