StarTech.com DKM31C3HVCPD Handleiding

StarTech.com Overige computer accessoire DKM31C3HVCPD

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com DKM31C3HVCPD (2 pagina's) in de categorie Overige computer accessoire. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: September 30, 2022 11:13 AM

Product Diagram (Side A)

(Side B)

(Side C)

(Side D)

Requirements

For the latest requirements, please visit www.StarTech.com/DKM31C3HVCPD

Product ID

DKM31C3HVCPD

USB-C 10Gbps Docking Triple Monitor Mini Station with HDMI & VGA – DP Alt Mode Pass Through - 25cm Wrap Around Cable

Component Function

1Built-in USB-C Host Cable

• Connect to a USB-C Port on a Host Laptop

• USB 3.2 Gen 2 (10Gbps)

• Power Delivery 3.0 Specication

2VGA Video Port

• Connect a VGA Display Device

• Up to 1080p (1920x1200/1920x1080) 60Hz

• Via DisplayPort 1.4 DP Alt Mode

3HDMI Video Port

• Connect an HDMI Display Device

• HDMI 2.0b HDR10

• Up to 4K (4096x2160) 60Hz

• Via DisplayPort 1.4 DP Alt Mode

4USB-C Data/Charge/DP++

Video Port

• Connect and/or charge a USB-C peripheral

• Connect a USB-C display directly, or for any other

Display, a USB-C Video Adapter is required

• USB 3.2 Gen 2 (10Gbps)

• Supports 5V/2A (10W) charging

• Display output via DisplayPort 1.4 DP Alt Mode

• USB-C Power Adapter required for charging

52x USB-A DataPorts • Connect and/or charge USB-A peripherals

• USB 3.2 Gen 2 (10Gbps)

6USB-C 100W Power

Delivery Input Port

• Connect a USB-C power adapter

• USB Power Delivery 3.0

7Gb Ethernet Port

• Connect a CAT 5e/CAT 6 cable to establish a

network connection

• 10/100/1000Mbps

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a 3-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Installation

Side A Ports

1. Connect the on the Multiport Adapter to a USB-C Built-in USB-C Host Cable

port on your host laptop. Your computer will automatically detect the device and

install all the required drivers.

2. Connect a VGA cable from your VGA enabled display device to the VGA Output

Port on the Multiport Adapter, to add a VGA display to your workstation.

3. Connect an HDMI cable from your HDMI enabled display device, to the

HDMI Output Port on the Multiport Adapter, to add an HDMI display to your

workstation.

4. To connect a display: If using display with USB-C input, connect a USB-C cable

from your display to the Multiport Adapter . For USB-C DP++ Video Port on the

other displays, connect a USB-C Video Adapter (HDMI, DisplayPort or VGA, sold

separately) from the Multiport Adapter to your USB-C DP++ Video Port on the

display device.

To connect and/or charge a USB-C peripheral device: Connect a USB-C

cable from your USB peripheral device to the on the USB-C Data/Charge Port

Multiport Adapter.

Notes:

• A video cable may also be required to connect your display, depending upon

your USB-C video adapter.

• Your computer’s USB-C port must support DP Alt Mode in order to output

video.

• Video performance, such as resolution, refresh rate depends upon your

host computer’s video controller. Please verify the specications of your

computer.

• A USB-C power adapter must be connected to the USB-C 100W Power

Delivery Input Port on the Multiport Adapter, in order to charge connected

peripheral devices with up to 5V/2A (10W).

• Without a power adapter connected, the USB port will output whatever bus

power is available, up to 4.5W.

Installation Cont’d

Side B Port

5. Connect USB-A cables from your USB peripheral devices to the USB-A Data Ports

on the Multiport Adapter, to connect the devices to your computer.

Notes:

• One of the is located on Side C. USB-A Data Ports

• The USB port will output whatever bus power is available, up to 4.5W.

Side C Port

6. Connect a USB-C power adapter (up to 100W) from an AC outlet to the USB-C

100W Power Delivery Input Port on the Multiport Adapter, to charge the laptop

that’s connected to the . Built-in USB-C Host Cable

Side D Port

7. Connect a CAT 5e/CAT 6 cable from your local area network (e.g. Router, Switch,

Modem, etc.) to the Gb Ethernet Port on the Multiport Adapter, to access your

network via a wired LAN connection.

Product specificaties

Merk:	StarTech.com
Categorie:	Overige computer accessoire
Model:	DKM31C3HVCPD
Kleur van het product:	Grijs
Gewicht:	170 g
Breedte:	83 mm
Diepte:	144 mm
Hoogte:	28 mm
Snoerlengte:	0.25 m
Gewicht verpakking:	160 g
Breedte verpakking:	144 mm
Diepte verpakking:	207 mm
Hoogte verpakking:	38 mm
LED-indicatoren:	Activity, Link
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Type stroombron:	USB
Geïntegreerde geheugenkaartlezer:	Nee
Snelstartgids:	Ja
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	1
Microfoon, line-in ingang:	Nee
Aantal Ethernet LAN (RJ-45)-poorten:	1
Resolutie (maximum analoog):	1920 x 1200 Pixels
Maximale refresh snelheid:	60 Hz
HD type:	4K Ultra HD
HDMI versie:	2.0b
Resolutie (maximum digitaal):	3840 x 2160 Pixels
Duurzaamheidscertificaten:	CE, RoHS
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Temperatuur bij opslag:	-20 - 60 °C
Aantal poorten USB 3.2 Gen 2 (3.1 Gen 2) Type C:	1
Aantal poortenUSB 3.2 Gen 1 (3.1 Gen 1) Type C:	1
Hostinterface:	USB 3.2 Gen 2 (3.1 Gen 2) Type-C
Aantal poorten USB 3.2 Gen 2 (3.1 Gen 2) Type A:	2
Andere ondersteundende systemen:	ChromeOS
USB Power Delivery:	Ja
USB Power Delivery tot max.:	100 W
USB Type-C DisplayPort alternatieve modus:	Ja
Full duplex:	Ja
Chipset:	Genesys Logic - GL3590, Genesys Logic - GL9510-UFP, Genesys Logic - GL9510-DFP, Realtek - RTD2142, Realtek - RTL8153
(Buitenste) hoofdverpakking hoogte:	330 mm
(Buitenste) hoofdverpakking breedte:	425 mm
(Buitenste) hoofdverpakking lengte:	230 mm
Hoeveelheid per (buitenste) hoofdverpakking:	20 stuk(s)
Overdrachtssnelheid:	10 Gbit/s
Stroomverbruik (typisch):	12 W
Bedrijfstemperatuur (T-T):	0 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 90 procent
Code geharmoniseerd systeem (HS):	84733020
High Dynamic Range 10 (HDR10):	Ja
UASP-ondersteuning:	Ja