StarTech.com BT52A Handleiding

StarTech.com Bluetooth ontvanger BT52A

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com BT52A (2 pagina's) in de categorie Bluetooth ontvanger. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: November 10, 2020 5:25 PM

Product Diagram (BT52A)

Component Function

1DC 5V Port (micro

USB)

• Used to connect the to the Power Adapter

Audio Receiver.

2Optical Port • Used to connect an via Audio Device Toslink®

Cable Audio Receiver to the .

3Audio Out Port • Used to connect an via Audio Device 3.5 mm

Cable Audio Receiver to the .

4 LED Indicator (front)

• Flash Once: Audio Device Indicates that the is

powered and waiting to pair with a Bluetooth

Device.

• Solid: Bluetooth Device Indicates that a has

been paired with the .Audio Receiver

• Blinking: Bluetooth Device Indicates that the

is disconnected from the .Audio Receiver

Requirements

For the latest requirements, please visit www.startech.com/BT52A

Powering the Audio Receiver

1. Connect the to the on the and Universal Power Adapter DC 5V Port Audio Receiver

the other end to an .AC Electrical Outlet

2. The will ash once, Indicating that the is powered and LED Indicator Audio Device

waiting to pair with a .Bluetooth Device

Bluetooth® 5.0 Audio Receiver

Connecting the Audio Receiver

Analog

• Connect the (included) to the on the 3.5 mm Audio Cable Audio Out Port Audio

Receiver Audio In Port Audio Device and the other end to an on the (audio

receiver, etc.)

- or -

Connect the (included) to the on the 3.5 mm Audio Cable Audio Out Port Audio

Receiver RCA Breakout Cable and the other end to the (included). Then connect

both the left and right connectors on the to the left and right RCA Breakout Cable

Audio In Ports Audio Device on the .

Digital

• Connect the (sold separately) to the on the Toslink Cable Optical Port Audio

Receiver Optical Port Audio Device and the other end to an on the (audio receiver,

etc.)

Pairing with NFC Fast Connection

The is equipped with a standard NFC tag to allow for NFC pairing. Audio Receiver

NFC allows you to connect a to the by touching the Bluetooth Device Audio Device

Bluetooth Device Audio Receiverto the .

The maximum distance the can be from the is 66 ft Bluetooth Device Audio Receiver

(20 meters).

NOTE: Only one may be paired to the at a time.Bluetooth Device Audio Device

1. Ensure NFC is enabled on your . Check the device’s manual for Bluetooth Device

details.

2. Touch a to the top of the for 3 seconds.Bluetooth Device Audio Receiver

NOTE: If this is the rst time your has been paired you may receive Bluetooth Device

a message requesting access.

3. The is now paired, the will be solid and audio Bluetooth Device LED Indicator

from the will output through the connected .Bluetooth Device Audio Device

Disconnecting from your NFC Device

1. Touch the paired to the top of the for 3 seconds.Bluetooth Device Audio Receiver

2. The is now disconnected from the .Bluetooth Device Audio Device

123

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

ISED Statement

This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s

licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) this device may not cause interference,

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement

This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment

should be installed and operated with minimum distance 0.5cm between the radiator and your body.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm

Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International,

Ltd., registered in the United States and other countries.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto p2-ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Manually Pairing a Device

Note: If the instructions below do not match your , please refer to the owners Device

manual for your for further instructions. Device

1. From the , select . Host Bluetooth Device Settings

2. On the screen, select .Settings Bluetooth

3. Select the to activate the function.Sider Bluetooth

4. A list of enabled will appear. Select the from the Bluetooth Devices HD Receiver

list.

Reconnecting a Device

1. Move the back into the expectable range of the Bluetooth Device Audio Receiver

(66 ft or 20 meters).

2. Go back into the and select the Bluetooth Device’s Bluetooth Settings HD

Receiver from the list.

Product specificaties

Merk:	StarTech.com
Categorie:	Bluetooth ontvanger
Model:	BT52A
Kleur van het product:	Zwart
Breedte:	84.5 mm
Diepte:	77 mm
Hoogte:	26.5 mm
Breedte verpakking:	120 mm
Diepte verpakking:	242 mm
Hoogte verpakking:	63 mm
Stroombron:	USB
Bluetooth-versie:	5.0
Near Field Communication (NFC):	Ja
Meegeleverde kabels:	Audio (3.5mm), RCA
Snelstartgids:	Ja
Duurzaamheidscertificaten:	CE, RoHS
Temperatuur bij opslag:	-20 - 60 °C
Externe adapter:	Ja
Stroomverbruik:	5 W
Output current:	1 A
Spanning:	5 V
Hostinterface:	3.5 mm + TOSLINK
Transmissie-afstand:	20 m
(Buitenste) hoofdverpakking hoogte:	283 mm
(Buitenste) hoofdverpakking breedte:	425 mm
(Buitenste) hoofdverpakking lengte:	275 mm
Hoeveelheid per (buitenste) hoofdverpakking:	12 stuk(s)
AC-ingangsspanning:	100 - 240 V
Bedrijfstemperatuur (T-T):	0 - 40 °C
aptX audio-decodering:	Ja
Aantal opgeslagen gekoppelde apparaten:	8