StarTech.com AF212C-POE-INJECTOR Handleiding

Bekijk gratis de handleiding van StarTech.com AF212C-POE-INJECTOR (2 pagina’s), behorend tot de categorie Netwerkkaart/adapter. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.6 sterren uit 9 reviews. Heb je een vraag over StarTech.com AF212C-POE-INJECTOR of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: May 27, 2024

Product ID

AF212C-POE-INJECTOR

Top

1-Port 802.3at 30W 2.5Gbps PoE+ Injector

ComponentFunction

1Mounting HolesMount the to an appropriate surface• PoE Injector

2Power InputConnect the included • 6ft (1.8m) NA Power Cord

3Power LED is receiving power• Solid Green: PoE Injector

4

PoE+ Port

(Data + PoE)

• Connect an to a Ethernet CablePD (Powered

Device)

• Supports , , and 2.5Gbps, 1Gbps100Mbps

10Mbps

• Supports and 802.3af802.3at

5Data Port

• Connect an to a Ethernet CableNetwork Device

• Supports,, and 2.5Gbps, 1Gbps 100Mbps

10Mbps

Product Information

For the latest product information, technical specications, and declarations of

conformance, please visit: www.StarTech.com/AF212C-POE-INJECTOR

Requirements

• Network Cables x 2

Package Contents

• PoE Injector x 1

• 6ft (1.8m) NA Power Cord x 1

• Quick-Start Guide x 1

Installation

(Optional) Mount the PoE Injector

1. Determine the and for the . Mounting SurfaceLocationPoE Injector

2. Mount the to the desired using the appropriate PoE InjectorMounting Surface

Mounting Hardware Mounting Holes(e.g. Wood Screws) through the built-in .

Install the PoE Injector

1. Connect an from the (i.e., router, modem, or Ethernet CableSource Network Device

non-PoE switch) to the on the . Data PortPoE Injector

2. Connect an to the on the . Ethernet CablePoE+ PortPoE Injector

3. Connect the other end of the used in to either a Ethernet CableStep 2PD (Powered

Device) PoE SplitterDataPoweror a to separate and .

4. Plug the included into an and connect it to the NA Power CordAC Outlet

Power Port, PoE InjectorPower LEDlocated on the rear of the. Verify that the is

illuminated.

1

1

3

2

4

5

Product specificaties