StarTech.com 102B-USBC-MULTIPORT Handleiding

StarTech.com Overige computer accessoire 102B-USBC-MULTIPORT

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com 102B-USBC-MULTIPORT (2 pagina's) in de categorie Overige computer accessoire. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: February 2, 2022 10:55 AM

Product ID

102B-USBC-MULTIPORT

Product Diagram (Side A)

(Side B)

(Side C)

Component Function

1Built-in USB-C Host Cable

• Connect to a USB-C Port on a Host Laptop

• USB 3.2 Gen 2 (10Gbps)

• Power Delivery 3.0 Specication

2USB-C Data Port • Connect a USB-C peripheral

• USB 3.2 Gen 2 (10Gbps)

Requirements

For the latest requirements, please visit www.StarTech.com/102B-USBC-MULTIPORT

USB-C DP 1.4 Multiport Adapter - Dual HDMI 4K 60Hz - USB-C and USB-A, GbE, SD 4.0 (UHS-II) - 100W PD

3USB-A Data/Charge Port

• Connect and/or charge a USB-A peripheral

• USB 3.2 Gen 2 (10Gbps)

• Supports BC1.2 5V/1.5A (7.5W)

• USB-C Power Adapter required for

charging

4SD Card Reader

• Secure Digital (SD) 4.0 UHS-II, SD 3.0, 2.0,

1.1, and 1.0 compatibility

• Push an SD Card, label side up, into the SD

• Card Slot

• Note: The Host Computer’s Operating

System (OS) will automatically detect the

SD Card and install the required driver

software

• Pull the SD Card to remove

52 x HDMI Output Ports

• Connect to HDMI Display Devices

• HDMI 2.0

• Up to 4K (4096x2160) 60Hz

6Gb Ethernet Port

• Connect a CAT 5e/CAT 6 cable to establish

a network connection

• 10/100/1000Mbps

7USB-C 100W Power

Delivery Port

• Connect a USB-C power adapter

• USB Power Delivery 3.0 (up to 100W, with

up to 85W available for charging)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

Warranty Information

This product is backed by a 3-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Installation

Side A Ports

1. If you have a Windows computer with Internet access, connect the Built-in USB-C

Host Cable on the Multiport Adapter to a USB-C port on your host laptop. Your

computer will automatically detect the device and install all the required drivers.

If you’re running a non-Windows operating system or the drivers do not

automatically install, disconnect the device from your computer, then:

a. Navigate to and click the www.StarTech.com/102B-USBC-MULTIPORT Drivers/

Downloads tab.

b. Under , download the Driver Package for your operating system, and Driver(s)

follow the steps outlined in the Installation guide, that’s included in the Driver

Package.

2. When connecting USB peripheral devices, connect a USB-C cable from your USB

peripheral device to the .USB-C Data Port on the Multiport Adapter

Note: The USB port will output whatever bus power is available, up to 4.5W.

3. Connect a USB-A cable from your USB peripheral device to the USB-A Data/

Charge Port on the Multiport Adapter, to connect the device to your computer,

and/or charge your device with up to 5V/1.5A (7.5W).

Notes:

• A USB-C power adapter must be connected to the USB-C DATA/ 100W Power

Delivery Port on the Multiport adapter, in order to charge connected peripheral

devices.

• Without a power adapter connected, the USB port will output whatever bus

power is available, up to 4.5W.

4. Insert your memory card into the SD Card Reader, and press the card to lock it

into place. Your computer will recognize the card and mount it as a drive on your

connected host computer. To remove the memory card, push the card in and

then pull the memory card out.

Note: To protect your memory card and the data stored on it, it’s important to

safely unmount (eject) the card within your computer’s operating system, before

physically removing the card from the Multiport Adapter.

Side B Ports

5. Connect an HDMI cable from up to two HDMI enabled display devices, to the

HDMI Output Ports on the Multiport Adapter, to add additional HDMI displays to

your workstation.

6. Connect a CAT 5e/CAT 6 cable from your local area network (e.g. Router, Switch,

Modem, etc.) to the on the Multiport Adapter, to access your Gb Ethernet Port

network via a wired LAN connection.

Side C Ports

7. Connect a USB-C power adapter (up to 100W) from an AC outlet to the USB-C

100W Power Delivery Port on the Multiport Adapter, to charge the laptop that’s

connected to .Built-in USB-C Host Cable

Note: The Multiport Adapter reserves of power, with up to W available 15W 85

for charging your laptop.

Installation Cont’d

Product specificaties

Merk:	StarTech.com
Categorie:	Overige computer accessoire
Model:	102B-USBC-MULTIPORT
Kleur van het product:	Grijs
Gewicht:	250 g
Breedte:	95 mm
Diepte:	95 mm
Hoogte:	17 mm
Snoerlengte:	0.3 m
Gewicht verpakking:	400 g
Breedte verpakking:	145 mm
Diepte verpakking:	145 mm
Hoogte verpakking:	42 mm
Materiaal behuizing:	Kunststof
Ondersteunde mobiele besturingssystemen:	Android
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Type stroombron:	USB
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MMC, SD
Kleurnaam:	Space Gray
Aantal HDMI-poorten:	2
Aantal Ethernet LAN (RJ-45)-poorten:	1
Maximale refresh snelheid:	60 Hz
HDMI versie:	2.0
Resolutie (maximum digitaal):	4096 x 2160 Pixels
Duurzaamheidscertificaten:	CE, RoHS
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Temperatuur bij opslag:	-25 - 65 °C
Aantal poorten USB 3.2 Gen 2 (3.1 Gen 2) Type C:	2
Ondersteunt Mac-besturingssysteem:	Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey, Mac OS X 13.0 Ventura
Naleving van duurzaamheid:	Ja
Ondersteunt Linux:	Ubuntu 18.04 LTS, Ubuntu 20.04 LTS
Hostinterface:	USB 3.2 Gen 2 (3.1 Gen 2) Type-C
Aantal poorten USB 3.2 Gen 2 (3.1 Gen 2) Type A:	1
Andere ondersteundende systemen:	ChromeOS
USB Power Delivery:	Ja
USB Power Delivery herziening:	3.0
USB Power Delivery tot max.:	100 W
Full duplex:	Ja
Aantal displays ondersteund:	2
Chipset:	VIA - VL103R-Q4, VIA - VL822-Q8, ASMEDIA - ASM1541, Genesys - GL3232S, Realtek - RTL8211F, DisplayLink - DL-6950
(Buitenste) hoofdverpakking hoogte:	303 mm
(Buitenste) hoofdverpakking breedte:	487 mm
(Buitenste) hoofdverpakking lengte:	353 mm
Hoeveelheid per (buitenste) hoofdverpakking:	40 stuk(s)
Overdrachtssnelheid:	10 Gbit/s
Bedrijfstemperatuur (T-T):	0 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Code geharmoniseerd systeem (HS):	84733020
UASP-ondersteuning:	Ja