Starburst SB-3790ART-FM Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Starburst SB-3790ART-FM (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 73 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
CONTACT:
a division of PDI Communications Inc.
6353 W Rogers Circle #6, Boca Raton, FL 33487
TF: 800-242-1606
Email: sales@starburstmounts.com
Web: www.starburstmounts.com
©2019 Starburst Technologies All rights reserved.
Installation Manual
Swivel Tilt Extend TV Wall Mount
Model: SB-3790ART-FM
Please visit our Starburst
Mounts YouTube channel
for installation videos.
If you have any question, please contact us at or send an email to 800-242-1606, sales@starburstmounts.com.
CAUTION:
This mount is intended for use only
with a maximum weight of 132 lbs. Use with
products heavier than the maximum weight
indicated may result in collapse of the mount
and its accessories, causing possible injury.
ATTENTION :Ce support est conçu pour être utilisé
uniquement avec un poids maximal de 132 lb. L'utilisation
avec des produits plus lourds que les poids maximaux
indiqués peut entraîner l'affaissement de la monture et
de ses accessoires, pouvant entraîner des blessures.
• Use with products heavier than the rated weights indicated may result in instability
causing possible injury.
• Please closely follow the assembly instructions. Improper installation may result in
damage or serious personal injury.
• Safety gear and proper tools must be used.
• This product is designed to be installed on solid concrete walls or wood stud walls.
• Make sure that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
• Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
• This product contains small items that could be a choking hazard if swallowed. Keep
these items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead
to product failure and personal injury.
• Save these instructions for future use.
IMPORTANT SAFETY INSTRUCTIONS
PREPARATION:
Please make sure the mount is appropriate for the TV before installation.
What’s your wall frame?
Wood stud walls Drywall alone
Solid concrete walls
√√ ×
3
Measure the hole pattern found on the back of your TV. If the horizontal distance is
400mm and the vertical distance is 300mm, the VESA size of your TV is 400x300.
Refer to the corresponding VESA size on the instruction manual. If the mount is not
compatible, contact your local Starburst dealer or visit starburstmounts.com to find
a right mount.
200x200/300x200/300x300
400x200/400x300/400x400/600x400
200x100/
Does your TV match the stated VESA?
2
Does the weight of TV (including accessories)
exceed the maximum weight limitation? 132lbs
(60kg)
RATED
1
If the mount is not compatible, contact your local Starburst dealer
or visit starburstmounts.com to find a right mount.
Read the entire instruction manual before you start the installation and
assembly. If you have questions regarding any of the instructions or
warnings, please contact your local Starburst dealer for assistance.
Thank you for purchasing our Starburst SB-3790ART-FM mount. This SB-3790ART-FM
Swivel Tilt Extend TV wall mount extends an amazing 31.5" from the wall, providing
enough space for maintenance or wiring. Sits 2.8" from the wall when fully compressed.
Features +2°~ 15° tilt adjustment and +60°~-60° swivel adjustment.-
What tools are required for the installation?
4
Power Drill Phillips Screwdriver PencilTape Measure
Wood Stud Install
Φ 1/4 inch Drill Bit
Solid Concrete Install
Φ 1/2 inch Drill Bit
Tips Tools are not included in the package.:
Stud Finder Hammer
1
Bubble LevelSocket Wrench
(14mm)
1 /2 inch
1
Ensure that you have received all parts according to the component checklist prior to installation.
If any parts are missing or faulty, contact us for a replacement.
PACKAGE LIST
TV Bracket & Arm Assembly (x1)
A
Anchor
W-B (x6)
Lag Bolt
W-A (x6)
Allen Key (x1)
I
M8x30
M-G
(x4)
M6x30
M-F
(x4)
M5x14
M-C
(x4)M4x14
M-A
(x4)
M8x50
M-H
(x4) Spacer (x8)
M-J
Spacer
M-K
(x8)
M4x35
M-B
(x4) M5x35
M-D
(x4) M6x14
M-E
(x4)
INSTALLATION
1. Remove TV Bracket from the Arm Assembly
Loosen and release the upper and lower hexagon nuts found on the back of center column of TV bracket with double
ended cresent wrench (H).
A
Flat Washer
W-C (x6)
Two-Hole Washer (x4)
M-I
Mounting Template (x1)
C
Cover (x2)
D
Fixing Piece (x2)
EM6x15 (x7)
F
Flat Washer (x7)
G
Double Ended
Cresent Wrench (x1)
H
Wall Plate (x1)
B
2. Attach the Bracket to TV
2.1 Place TV Bracket as Shown
2. Position the TV brackets as close as possible to the
center of the display.
2.2a Attach TV Bracket to Flat Back Screen
Attach TV bracket using the shorter TV screws
(M-C)/(M-E) and washers (M-I) .
(M-A)/
TV
1.2b Attach TV Bracket to Irregular (Curved or
Recessed) Back Screen
Attach TV bracket using the longer TV screws
(M-B)/(M-D)/(M-F)/ (M-G)/(M-H) ,washers (M-I)
and spacers (M-J)(M-K).
TV
M-E
M-I
M-K M-J
M-K
M-I M-I
M-B
M-D
M-F
M-G
M-J
M-I
M-K
M-H
M-I
M-J
M-K
M-H
M-I
M-J
M-K
M-H
M-I
Length:
A screw that is too long can damage the display.
A screw that is too short will not hold the display.
Select appropriate TV screws
TV TV
CAUTION 
TV TV
M4 M6 M8
Diameter:
Inserts the screws into the hole on the back of
your TV to determine which diameter to use.
M-A/M-C
M-I
M-B
M-D
M-F
M-G
M-B
M-D
M-F
M-G
H
A
A
B
With the arrow pointing up.
H
1. Loosen and release the upper and lower hexagon nuts
found on the back of TV arm brackets and adjust brackets
to align the hole pattern of your TV. Once adjusted, tighten
the all hexagon nuts .
B
B
32
Level (x1)
J


Product specificaties

Merk: Starburst
Categorie: Niet gecategoriseerd
Model: SB-3790ART-FM

Heb je hulp nodig?

Als je hulp nodig hebt met Starburst SB-3790ART-FM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Starburst

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd