Stanley STHT77666 Handleiding

Stanley Afstandsmeter STHT77666

Lees hieronder de 📖 handleiding in het Nederlandse voor Stanley STHT77666 (85 pagina's) in de categorie Afstandsmeter. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/85

TLM40

User Manual

Please read these instructions before operating the product.

www.2helpU.com

FIN

Figures

6.17ft

USB

Contents

• User Safety

• Charging the Battery

• Operation

• Warranty

• Error Codes

• Specications

Retain all sections of this manual for future

reference.

User Safety

WARNING:

Carefully read the Safety

Instructions and Product Manual

before using this product. The person

responsible for the product must

ensure that all users understand and

adhere to these instructions.

WARNING:

The following label information

is placed on your laser tool to inform

you of the laser class for your

convenience and safety Figure B.

Symbol Meaning

V Volts

mW Milliwatts

Laser Warning

nm Wavelength in nanometers

2 Class 2 Laser

WARNING: To reduce the risk of

injury, user must read this

instruction manual and the

Safety Manual.

WARNING: LASER

RADIATION. DO NOT STARE

INTO BEAM. Class 2 Laser

Product.

WARNING:

While the laser tool is in

operation, be careful not to expose

your eyes to the emitting laser beam

(red light source). Exposure to a laser

beam for an extended time period may

be hazardous to your eyes. Do not

look into the beam with optical aids.

Charging the Battery

Fully charge the battery before initial use and

whenever the tool has not been used for 6

months or longer.

1. Locate the port cover on the side of the

tool (Figure A 4).

2. Using your finger, gently pull the port cover

down (Figure C 1).

3. Insert the small end of the USB Recharge

Cable into the port on the side of the tool,

making sure to insert the flat side of the

cable into the flat side of the port (Figure

C 2).

4. Insert the USB end of the cable into a USB

port in a computer or USB power outlet

(Figure C 3).

5. Wait approximately 2.5 hours for the

battery to fully charge and then disconnect

the USB Recharge Cable.

When the tool is ON, the battery level appears

Product specificaties

Merk:	Stanley
Categorie:	Afstandsmeter
Model:	STHT77666
Kleur van het product:	Black, Yellow
Gewicht:	31.75 g
Breedte:	32 mm
Diepte:	17.5 mm
Hoogte:	62 mm
Internationale veiligheidscode (IP):	IP54
Automatisch uitschakelen:	Ja
Beeldscherm:	LCD
Eenheid van de maatregel:	m
Laser klasse:	2
Bedrijfstemperatuur (T-T):	0 - 40 °C
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Temperatuurbereik voor opslag (T-T):	-10 - 60 °F
Meting-bereik:	0.165 - 12 m
Meting-nauwkeurigheid:	0.06 m