SPT SR-652R Handleiding

SPT Fornuis SR-652R

Lees hieronder de 📖 handleiding in het Nederlandse voor SPT SR-652R (6 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Your Guarantee
If this product is found to be faulty as a result of faulty
materials or workmanship within one year from date of
purchase, it will be repaired free of charge.
This guarantee is subject to the following terms:
Sunpentown must be notied of the fault.
Proof of purchase must be presented to Sunpentown’s nominated
representative.
The warranty will be void if the product if modied, misused or repaired
by an unauthorized person.
The warranty after repair will not be extended beyond the original one-
year period.
All replacement parts will be new or reconditioned.
Parts, which are replaced, become the property of Sunpentown.
The warranty applies for the use of the product in the USA only.
What is NOT COVERED:
Warranty does not include freight charges.
Incidental or consequential damage caused by possible defects with
this product.
Damage to product caused by improper power supply voltage, accident,
re, oods or acts of nature.
Failure of product resulting from unauthorized modications to the
product.
Improper installation or failure to perform the necessary maintenance.
This GUARANTEE is in addition to your Statutory Rights
SUNPENTOWN INTERNATIONAL INC.
14625 Clark Ave. City of Industry, CA 91745
Tel: 800-330-0388
service@sunpentown.com
www.sunpentown.com
SMARTSCAN
®
SR-183R (120V / 1800W)
SR-652R (208-240V / 2700W)
INSTRUCTION MANUAL
Thank you for purchasing your SMARTSCAN induction cooker by Sunpentown. Make
full use of your new induction range. Please carefully read this manual and keep on
hand for future reference.
IMPORTANT SAFEGUARDS
A. Read all instructions.
B. Do not touch hot surfaces. Use handles or knobs.
C. To protect against electrical shock, do not immerse cord or appliance in water or
other liquid.
D. Close supervision is necessary when any appliance is used by or near children.
E. Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking o parts.
F. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions or has been damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or adjustment.
G. The use of accessory attachments not recommended by the appliance manufacturer
may cause injuries.
H. Do not use outdoors.
I. Do not let cord hang over edge of table or counter, or touch hot surfaces.
J. Do not place on or near a hot gas or electric burner, or in a heated oven.
K. Extreme caution must be used when moving an appliance containing hot oil or
other hot liquids.
L. Always attach plug to appliance rst, then plug cord into the wall outlet. To
disconnect, turn any control to “o”, then removed plug from wall outlet.
M. Do not use appliance for other than intended use.
N. Save these instructions.
SPECIFICATIONS
Model SR-183R SR-652R
Voltage 120V~ 60Hz 208-240V~ 50/60Hz
Consumption 1800W 2700W
Dimension 12.60” x 13.4” x 3.94” (H)
Weight 12.79 LBS
Power Range 350~1800W 250~2700W
Cord Length 5.9 feet
Protection Designs
Overheat protection. Automatic hazard detection. Circuit
protection sensor. High voltage. 20A fuse. Small object
heat prevention. Thermostat. Pan material detection
Warning: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
consumer ISM equipment, pursuant to Part 18 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
Consult the dealer or an experienced radio TV technician for help.
This device complies with part 18 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
1
10
TROUBLESHOOTING
PROBLEM CHECK POINTS
No power or cooktop
does not read the
command
Is the cooktop plugged rmly into a correct outlet?
Does the cooktop have a dedicated 15-amp line? The cooktop
needs 13 amps to operate and should be on a 15-amp dedicated
circuit. If the circuit is not 15-amps or if there are other electrical
draws on the circuit, the unit is not getting enough power.
Has the unit been dropped or handled roughly? If so, we suggest
sending it in for evaluation.
Are the buttons broken?
Was there a power shortage in the building?
Cook / Temp indicator
continues to flash
even with a pan on
the unit and the unit
does not heat up
Is the pan an induction compatible pan? These symptoms suggest
the cooktop is not sensing a pan.
The pan may be too small or too large for the electromagnetic eld.
The pan should be no smaller than 4.5” or larger than 12”.
Is the pan centered in the electromagnetic eld?
Cooktop suddenly
stops heating during
normal operation
There may have been a power shortage (blow out) at the facility
where the unit is being used and starving the unit of power. This
may also occur if you are not using a 15-amp dedicated line.
Has another electrical appliance begun to draw from the same
circuit therefore starving the cooktop of power?
Check the fan to see if it is still running.
Are the air vents blocked? The vents can be blocked on the outside
by a wall or something similar OR on the inside by dust, grease and
food residue. The unit must have a 2” clearance for air circulation
around the sides and back. Otherwise, the internal temperature will
become too high. The unit has a Safety Shut-Off, which lasts for 15-
20 minutes before returning to full power. If it is necessary to leave
an empty pan on the unit, the power must be set below 300 watts.
Was the unit on cook mode for more than 2 hours but with no
settings changed?
Pan does not get hot
enough even though
temperature is set on
high
Check if the “TEMP” button is on, which means the cooktop will
generate no more than 1100watts of power. If so, switch to COOK.
Are you using an extension cord? Any use of an extension cord over
10 feet will aect the power reaching cooktop.
Pan cooks unevenly
or does not maintain
heat level and
overheats
Is it an induction compatible pan?
Pan may be the wrong shape (too convex/concave) or the wrong
size (smaller than 4.5” or larger than 12”).
Pan may not be centered on the cooktop.
Fan continues to run
when the unit is
turned o
The fan will continue to run until unit is completely cooled down.
This is a safety feature. It is designed to help preserve the life of the
cooktop.
INDEX
Page 1 – Important Safegaurds
Page 2 – Index
Page 3 – Installation Knob
Page 4 – Installation
Page 5 – How to Use
Page 6 – Key Points Before Using the Cooktop
Page 7 – List of Suitable & Unsuitable Cookware
Page 9 – Troubleshooting
Page 10 – Specications
9
2


Product specificaties

Merk: SPT
Categorie: Fornuis
Model: SR-652R

Heb je hulp nodig?

Als je hulp nodig hebt met SPT SR-652R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fornuis SPT

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis