Speco Technologies ZIPK8WN2 Handleiding

Speco Technologies Bewakingscamera ZIPK8WN2

Lees hieronder de 📖 handleiding in het Nederlandse voor Speco Technologies ZIPK8WN2 (3 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

Speco Gray Viewer Series Surveillance System

After Wireless NVR startup is completed, the Startup Wizard will be displayed. Wizard setting menu

includes: Set Admin Password ,Homepage, HDD Management, Network Configuration, Email

Configuration , Record Schedule and General System Configuration.

Set Admin Password

2) Homepage and HDD Management

You can click “Cancel” to skip Start Wizard. Check “Don't show this window next time" if you

don’t want to display Start Wizard when system start-up.

Overwrite: Use this option to overwrite the old recordings on the HDD when the HDD is full.

For example, if you choose the option 7 days then only the last 7 days recordings are kept

on the HDD. To prevent overwriting any old recordings, select Disable. If you have disabled

this function, please check the HDD status regularly, to make sure the HDD is not full.

Please create a user name and password for your device.

Select the HDD which you want to format, and then click “Format HDD” button to format the HDD.

The hard drive comes pre formatted if a new hard drive is installed for the first time - , ,

it will need to be reformatted .

Install the cameras on the walls and connect the power adapters to

each camera. Tip: The recorder should be at the center of all the

cameras for best performance.

Plug in the Wireless NVR power adapter to the wall outlet. You

may use the included power cable extensions for the cameras

and/or recorder to desired power outlet if needed.

Connect the Wireless NVR to your router using the LAN ports with

the included Ethernet cable so that you may view the cameras

from a web browser or mobile device (optional).

When the Wireless NVR is powered on,it will automatically start the pairing

process with the cameras. Once the process is complete,the Wireless

NVR will display live video feeds from your cameras and then start

recording.

You will briefly see a live video on display before you start the Startup

Wizard.

To configure the advanced settings for device, please follow the Startup

Wizard instructions to complete installation as shown below.

(1)

(2)

(3)

(4)

NO Physical interface Connection

Ground connection A terminal to connect a separate ground cable .

* Make sure to add a ground cable in order to use the equipment safely .

SD SD Port

USB port Connect with USB .

HDMI

Connect with HDMI display devices such as PC monitor , .

WAN RJ45:( )

Network port

Connect with WAN Ethernet cable , .

Power port Connect with the power supply DC12V 2A included with the device , .

Antenna Receive signal from wireless camera .

(3)

(5)

(6)

5) Record Schedule

6) General System Configuration

3) Network Configuration 4) Email Configuration

This menu allows your recorder to send email notification on events such

as motion is detected or error events.Obtain the correct server and port

information from your email service provider.

Please check the DHCP box if connecting to a network that assigns IP addresses

automatically. A router will typically have DHCP capability.

: The IP address identifies the NVR in the network. It consists of four IP Address

groups of numbers between 0 to 255, separated by periods. For example,

“192.168.001.100”.

: This address allows the NVR to access the Internet. The format of the Gateway

Gateway IP Addressaddress is the same as the . For example, “192.168.001.001”.

: DNS1 is the primary DNS server and DNS2 is a backup DNS server. DNS1/DNS2

Usually should be enough just to enter the DNS1 server address.

Port

Web Port: This is the port that you will use to log in remotely to the NVR (e.g. using the Web

Client). If the default port 80 is already taken by other applications, please change it.

This is the port that the NVR will use to send information through (e.g. using Client Port:

the mobile app). If the default port 9000 is already taken by other applications, please

change it.

This is the port that the NVR uses to transmit real-time streaming to other RTSP Port:

devices (e.g. a streaming media player)

To log in remotely to the NVR using a web browser through DDNS, port forwarding UPNP:

must be set up in the router. Enable this option if the router supports UPnP.

This menu allows you to specify when the Wireless NVR records video

and define the recording mode for each channel. The recording schedule

lets you set up a schedule like, daily and hourly by Normal (continuous)

recording, Motion recording, and Alarm recording. To set the recording

mode, click first on the mode radio button (Normal, Motion, or Alarm),

then drag the cursor to mark the slots.

This menu allows you to configure the general parameters of the

system, such as Date, Time, Date Format, Time Format, Language,

Menu Timeouts, Mode.

4 Remote Access via Web Client

The NVR can be accessed remotely in multiple ways on the PC. The simplest way

is to access it using the Speco Gray Viewer application which is available for

download on our website. If on the same network as the NVR, enter the LAN IP

address of the NVR in Speco Gray Viewer. If the NVR is on a different network,

enter the P2P ID of the NVR. Internet Explorer can also be used for remote

access. There are 2 ways to access the NVR through Internet Explorer. First is

with a LAN IP address if the NVR is on the same network as the PC. Second, if

DDNS was set up, the NVR can be accessed through DDNS from a different

network.

Go to Device. Press ' ' a nd choose Manual to add a new device. Press the QR

code icon next to Device ID and scan the QR code on the NVR. Then enter the

client port (default 9000), user name, and password. Press "Save" to ﬁ nish setup.

5 Remote Live View on Mobile Devices

Search for and install "Speco Gray Viewer".

Open the App Store(iOS)or play store(Android).

Open the Speco Gray app

ATTENTION!

As we are continuing to update our products with latest features, please download the

the following latest manual and tools from the link and QR code.

Scan QR use URL below this code or the to go to the product page below to download

the manual..

https://specotech.com/product/zipk8wn2

Product specificaties

Merk:	Speco Technologies
Categorie:	Bewakingscamera
Model:	ZIPK8WN2

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies ZIPK8WN2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Bewakingscamera Speco Technologies

Speco Technologies VLDT3GM Handleiding

6 Juli 2023

Speco Technologies CVC624WDR Handleiding

1 Juli 2023

Speco Technologies ZIPTW4B1 Handleiding

27 Juni 2023

Speco Technologies O2ID21M Handleiding

26 Juni 2023

Speco Technologies Intensifier 2 CVC6246iHR Handleiding

26 Juni 2023

Speco Technologies O4DT1 Handleiding

25 Juni 2023

Speco Technologies O4iB2 Handleiding

25 Juni 2023

Speco Technologies O8D8M Handleiding

22 Juni 2023

Speco Technologies CVC5100BPVFW Handleiding

21 Juni 2023

Speco Technologies VLBT6W Handleiding

21 Juni 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Aqara Camera Hub G2H Handleiding

28 April 2024

Iiquu Dummy Dome Camera Handleiding

28 April 2024

Sony SNC-VB640 Handleiding

26 April 2024

Sony SNC-EB642R Handleiding

26 April 2024

Sony SNC-VB642D Handleiding

26 April 2024

Sony SRG-HD1 Handleiding

26 April 2024

Sony SNC-ZM550 Handleiding

26 April 2024

Sony SNC-EM642R Handleiding

26 April 2024

Sony SNC-EM641 Handleiding

26 April 2024

Sony SNC-ZB550 Handleiding

26 April 2024