Speco Technologies VLD1A Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Speco Technologies VLD1A (10 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
User Manual
All- - One CameraIn
VLD1A
Version 0.11.
i
Table of Contents
1 General Introducon .................................................................1
1.1 Features ...........................................................................1
2 Device Framework .....................................................................2
3 Installaon .................................................................................3
ii
Welcome
Thank you for purchasing our All in One camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this
product!
Please keep this user manual for future reference!
Important Safeguards and Warnings
1 Electrical safety
All installaon and operaon here should conform to your local electrical safety
codes.
Please check if the power supply is correct before operang the device.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage)
and the Limited power source is rated DC 12V or AC24V in the IEC60950-1. (Power
supply requirement is subject to the device label).
Please install easy- -use device for power o before installing wiring, which is for to
emergent power o when necessary.
Please prevent the line cord from being trampled or pressed, especially the plug,
power socket and the juncon from the device.
Note: Do not connect these two power supplying sources to the device at the
same me; it may result in device damage!
We assume no liability or responsibility for all the res or electrical shock caused by
improper handling or installation.
We are not liable for any problems caused by unauthorized modicaon or
aempted repair.
2 Environment
Please don’t aim the device at strong light (such as lighng, sunlight and so on) to
focus; otherwise it may cause overexposure (It is not the device malfuncon), which
will aect the longevity of CCD or CMOS.
Please transport, use and store the device within the range of allowed humidity and
temperature.
Please don’t keep the device in a place which is wet, dusty, extremely hot, and
extremely cold and with strong electromagnec radiation or unstable lighng.


Product specificaties

Merk: Speco Technologies
Categorie: Bewakingscamera
Model: VLD1A

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies VLD1A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Speco Technologies

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera