Speco Technologies VLB5 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Speco Technologies VLB5 (8 pagina's) in de categorie Videocamera. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
User Manual
Thank you for purchasing our product. Speco Technologies is constantly developing and
improving products. We reserve the right to modify product design and specifications
without notice and without incurring any obligation.
VLB5 /VLB6/ / VLD5 VLD6M
Warnings
Speco Tech nologies is not respo nsible for any problems caused by improper operation or repair.
All in stallatio n and operation here shou ld conform to local electrical safety co des.
Mak e sure the power supp ly voltage is correct b efore u sin g the camera.
Do not drop the camera or su bject it to physical shock.
Do not use th e device beyond specified voltage range.
Do not place the camera in extremely hot, cold (the operating temperature shall be (-4˚F~122˚F), dusty or
damp locations, and do not expose it to high electromagnetic radiation.
To avo id heat accumulation, good ventilation is required for op erating environment.
If th e product does not work p rop erly, please con tact the dealer or wh ere the product was purchased.
Keep away from liquid while in use.
sensitiv ity, low noise and distortion and supp orts HD vid eo tran s mission with the common coaxial cable,
ensu ring the requirement of th e HD mo nitoring in the traditio nal surveillance system.
This camera series is th e latest techno logy and advanced circuit design, which features high definitio n and
Introduction
Hig h Reso lu tion
Adopt high performance sensor, providin g high definition and clear image.
Hig h Transmission Performance
Real time transmission with high sp eed and lon g distance- .
DNR
Reduce noise from brightness and colo r sign al .
OSD
Access the camera settings which can be clearly disp lay ed through the main menu.
White Balance
Adju st the color temperature according to the en viron ment automatically.
ICR Auto Switch
The filter will filter infrared light during th e day time and ch ang e to no rmal at nigh t to
ensu re a high sensitivity and clear imag e .
AGC
Adju st the gain of amplifier, enabling the camera to output the stan d ard vid eo sign al in different
lig htin g condition.
Wide Dynam ic Range (WDR)
When there are both very bright an d very dark areas simultan eou sly in th e field of view, th is fu nctio n
will b alance the brigh tn ess level and provide clear images.
1
Backlight Compensation BLC ( )
When the back of the captured object is too much bright, you can set BLC for the captured object to
make it clearer.
Cables
Power Cable
Video Output
Video Switch Cable
Video Switch: F our video output modes can be optional--AHD, TVI, CVI and CVBS
(a) remove the cover of the video switch cable; (b) hold and press the button in the video
switch cable for 5 seconds to switch the current video output.
2
Before you start, please make sure that the wall or ceiling is s tro ng e nou gh to w it hst and three ti mes
th e w eig ht o f t he camera. Please install and use the camera in the dry environment.
Youd better install back the lens cover or lower dome less than 4 hours after removing it.
The mounting types of cameras are only for reference.
Installation
Mounting for VLB5/VLB6
1. Drill the screw holes and the cable hole on the wall according to the drill template.
VLB6
48mm
48mm 4.5
VLB5
4.6
48mm
48mm


Product specificaties

Merk: Speco Technologies
Categorie: Videocamera
Model: VLB5

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies VLB5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Videocamera Speco Technologies

Handleiding Videocamera

Nieuwste handleidingen voor Videocamera