Speco Technologies VL644T Handleiding

Bekijk gratis de handleiding van Speco Technologies VL644T (2 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 40 mensen en kreeg gemiddeld 4.1 sterren uit 2 reviews. Heb je een vraag over Speco Technologies VL644T of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTRUCTION MANUAL

3 Axis 2MP 3.6mm FIXED DOME CAMERA

VL644T

FEATURES

Compact and light weight 3 Axis design

TVI / AHD / CVI / CVBS Video Output Selectable; NTSC / PAL Selectable

Multi Language OSD (On Screen Display) Menu Control via UTC

3D-DNR / 2D-DNR Selectable

Fixed lens built in for easy installation and adjustment

Manual 360 degrees rotation & / tilt mechanism pan

Can be installed on a wall or a ceiling

Video cable with BNC included

PRECAUTIONS

1. Do not attempt to disassemble the camera.

2. To prevent electric shock, do not remove screws or cover. There are no user-serviceable parts inside.

3. Handle the camera with care.

Do not abuse the camera. Avoid striking or shaking it. The camera could be damaged by improper handling or

storage.

4. Never face the camera toward the sun.

5. Use caution when operating the camera in the vicinity of bright lights or light reecting objects.

6. Do not operate the camera beyond its temperature, humidity or power source ratings.

7. Do not use the camera in an extreme environment where high temperature or high humidity exists.

8. Do not touch the sensor directly with your ngers. If necessary, use soft cloth moistened with alcohol to wipe o

the dust.

9. When the camera is not in use, keep the lens cap on to protect the sensor.

INSTALLATION

Remove the dome cover from the mounting base by rotating the dome cover clockwise.

Adjust the camera viewing angle by rst tilting then rotating the camera module. Turn the horizontal adjustment ring to

correct the image and to achieve proper orientation.

Once the installation is complete, replace the dome cover over the camera and tighten it by turning counterclockwise.

Connect the video output to the monitor or other video device through a 75 Ohms type coaxial cable and the DC-Jack to

a 12VDC power source.

Product specificaties