Speco Technologies SPCDC6 Handleiding

Bekijk gratis de handleiding van Speco Technologies SPCDC6 (2 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 4.6 sterren uit 9 reviews. Heb je een vraag over Speco Technologies SPCDC6 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Where To Place Your In-Ceiling Speakers

Placement can make all the difference in how your speakers sound,and how easy they will be to

install. Carefully consider where your speakers should be positioned. For optimum performance,

speakers should be mounted to the left and right of the main listening area and a minimum of 8 to

10 feet apart (See Fig. 2). Avoid mounting speakers in stud cavities containing electrical wiring,

heating ducts,water pipes,etc. Make sure the ceiling materials are sturdy enough to support the

weight of the speakers.

Adjustable Tweeters(Fig. 3)

The tweeter in your Speco speaker may be adjusted,allowing you to tailor the speaker to better fit the

listening area. The overall smoothest response is achieved with the tweeter facing straight out; how-

ever, you may find the sound more pleasing by aiming tweeters toward a particular listening area. To

adjust the tweeter, grasp the outside of the tweeter plate and gently pivot it toward the listening area.

Speaker Installation In Existing Construction(See Fig. 4)

Once you have selected the location for your speakers,you are ready to install them.

You will need the following:

• Stud Finder • Drill & Drill Bits • Wire Cutter/Strippers• Speaker Wire

•Pencil • Phillips Screwdriver • Utility Knife or Drywall Saw• Masking Tape

Speco recommends the use of 16-gauge wire minimum. For wire options,consult your retailer or

custom audio contractor.

1. Speco Speakers are designed to be installed in the ceiling or wall area between studs. Using a stud

finder, make sure you are between two studs. Tape the supplied template to the wall and lightly trace

around the inside with a pencil.

2. Cut the hole using your drywall saw. You may want to start with a small hole in the center of the

outline. This will allow you to check for any obstructions that may exist behind the desired location.

CAUTION:Be certain electrical wiring, water pipes or heating ducts do not interfere in the planned

installation areas prior to drilling or cutting the wall.

3. Run speaker wire from your amplifier or speaker switching device to the speaker location.

4. Carefullyremove the grille and inner grille backing by simply pulling it away from the magnetic

baffle. (Note:The open cell

foaminner grille backing

is designed to hide speaker

components from view

and maybe removed if

desired.) If you like the

standard white finish of

your Speco speakers grille,

skip to step5,but if you

want your speakers to

blend in with a colored

wall or ceiling,now is

the time to paint your

Congratulations on choosing Speco

Architectural Loudspeakers. Like all

Speco products,great care has been taken

in their design. Their combination of

advanced engineering and state-of-the-art

materials will provide you with years of

listening pleasure,while blending

smoothly into your home’s decor. Before

you get started, it is a good idea to identify

all the parts and hardware (See Fig. 1).

Speaker with self-contained

mounting clamps

Metal grille with foam

inner grille cover

FIG. 2

Speco ceiling speakcan be used as rearers

surround channels by mounting them (1)

on each side of(2) just behindor (3) in,,

back of the viewing position.

1

1

2

2

3

3

FIG. 3

(Continued on reverse)

Model SPCDC6

61/2˝Two-Way In-Ceiling Speaker Systems

Cutout template

Pivoting

tweeter

FIG. 1

FIG. 4

speaker’s perforated grille.

Product specificaties