Speco Technologies O2DB1 Handleiding
Bekijk gratis de handleiding van Speco Technologies O2DB1 (57 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 1.5 reviews. Heb je een vraag over Speco Technologies O2DB1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/57
Video Doorbell
User Manual
O2DB1
Please read this manual carefully before operating the unit and keep it for further reference
Important Safeguards and Warnings
1. Electrical safety
All installation and operation here should conform to local electrical safety codes.
Use a certified/listed 12VDC Class2 power supply only.
Please note: Do not connect two power-supplying sources to the device at the same time; it may result in device damage! The
product must be grounded to reduce the risk of electric shock.
Improper handling and/or installation could run the risk of fire or electrical shock.
2. Environment
Do not expose the unit to heavy stress, violent vibration, or long-term exposure to water and humidity during transportation,
storage, and/or installation.
Do not install near sources of heat.
Only install the product in environments inside the specification operating temperature and humidity range.
Do not install the camera near power lines, radar equipment, or other electromagnetic radiation.
Do not block any ventilation openings if any.
Use all the weatherproofing hardware requirements to minimize weather intrusion.
3. Operation and Daily Maintenance
Please shut down the device and then unplug the power cable before you begin any maintenance work.
Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on the lens surface.
Always use a dry soft cloth to clean the device. If there is too much dust, use a cloth dampened with a small quantity of neutral
detergent. Finally, use a dry cloth to clean the device.
Please use a professional optical cleaning method to clean the enclosure. Improper enclosure cleaning (such as using cloth) may
result in poor IR functionality and/or IR reflection.
The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera.
The dome cover is an optical device, please do not touch or wipe the cover surface directly during installation and use, please
refer to the following methods if dirt is found.
Stained with dirt:
Use an oil-free soft brush or hair dryer to remove it gently.
Stained with grease or fingerprint.
Use oil-free cotton cloth or paper soaked with alcohol or detergent to wipe from the lens center outward. Change the cloth and
wipe it several times if it is not clean enough.
Product specificaties
| Merk: | Speco Technologies |
| Categorie: | Niet gecategoriseerd |
| Model: | O2DB1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Speco Technologies O2DB1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Speco Technologies
18 Maart 2025
18 Maart 2025
11 Maart 2025
28 Januari 2025
27 December 2024
27 December 2024
26 November 2024
26 November 2024
26 November 2024
18 September 2024
Handleiding Niet gecategoriseerd
- Digital Watchdog
- NZXT
- Asko
- Bioogród
- RCS
- SRS
- Kitchen Brains
- Gamdias
- LONQ
- Vorago
- Drawmer
- Cioks
- Deltana
- Kendall Howard
- iAXBi
Nieuwste handleidingen voor Niet gecategoriseerd
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
31 Juli 2025
31 Juli 2025