Speco Technologies HLED31D7W Handleiding

Bekijk gratis de handleiding van Speco Technologies HLED31D7W (2 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 106 mensen en kreeg gemiddeld 4.2 sterren uit 7 reviews. Heb je een vraag over Speco Technologies HLED31D7W of wil je andere gebruikers van dit product iets vragen? Stel een vraag

◈NOTES:

1. Do not install the camera outdoors.

2. Choose a location for the camera which is free o

f

moisture and vibration.

3. Be careful not to scratch the camera lens or dome

cover.

4. Do not operate camera beyond listed temperature

(-49°F~122°F)

5. Handle with care. Dropping it can cause serious

damage to the camera.

6. Avoid any direct sun light into the lens.

7. To avoid shorting or damaging the camera, use

only power supplies which meet the listed

specifications (12VDC / 24VAC Dual voltage, 1A)

◈FEATURE

1. 650 TVL High Resolution Image

2. Smart DNR technology; reduces noise in low light.

3. 75’ range visible in total darkness with 24pcs of IR

LEDs. (Indoor).

4. This camera is flexible to install with its 3-axis

camera construction, this allows for the camera to

be mounted to ceiling, wall or slope surfaces.

5. True Day/Night, camera changes function based

on illumination, IR illuminators in dark (option)

6. 8 individual privacy zones

7. DWDR (Digital Wide Dynamic Range)

8. Multi function: High Light Mask, Lens Shading

Compensation, Smart Motion Detection

9. Smart IR: Objects can be clearly identified due to

the function that decreases screen saturation o

f

objects within a short distance when the IRs are

active.

10. Multi-language OSD.

11. 12VDC / 24VAC Dual Voltage operation.

◈HOW TO INSTALL

1. Opening the dome

Push in the latch button and pull back dome.

(Remove the protection sheet after installation is

completed).

2. Removing the dome

Lift the dome. When you push the latch button, it is

unlocked and you can lift the dome.

3. Camera installation

a. Mount the camera set with the supplied screws on

ceiling or wall.

It is recommended to utilize the supplied screws.

<Ceiling mount>

<Wall mount>

b. Please refer to Section 4 for details on Camera angl

e

adjustments

c. Lens adjustment (Vari-focal Lens only)

After opening the LED cover,

①By turning the “Tele-

Wide” knob, you ca

n

access a range of foca

lengths within specifie

d

limits.

②Once the focal length i

s

determined, turn the

“Near-Far” knob to se

t

the focus for the desire

d

scene.

d. Re-assemble the camera.

4. Camera angle adjustment

a. Pan adjustment: Turn the disk of camera and the

n

adjust direction to the right or left (-180˚to 180˚)

b. Tilt adjustment:Turn the camera holder (shown

below) to adjust the direction up or down (6 to˚

90˚)

c. Roll adjustment: Rotate the camera holder (-178˚

to 178 ) ˚

<Caution>If the camera is adjusted beyond the

angle limit, it may cause damage to the camera.

◈ASSEMBLY

◈DIMENSION

◈SPECIFICATION

Model No. HLED31D7B

HLED31D7W

HLED31D1B

HLED31D1W

Image Sensor 1/3" COLOR SONY SUPER HAD CCD II

Effective Pixel 768(H) x 494(V) Pixel

Cell Size 6.35

㎛

(H) x 7.4

㎛

(V)

Scanning System 2 : 1 Interlace

Sync. Type Internal

Resolution 650 TV-Line

S/N 52dB or More(AGC OFF)

Video Output 1.0 Vp-p(Sync. Negative) Termination 75 Ω

Min. Illumination 0.01Lux(F/1.2)

0Lux (75’ Range with 24pcs LED) - Indoor

Gamma γ = 0.45 typ.(0.2 ~ 1.0)

OSD Yes(Multi Language)

White Balance ATW(2,500°K ~ 9,500°K)/MANUAL/AWC

Shutter Speed 1/60 ~ 1/100,000sec

Sense up Auto(Selectable limit 2X~1024X)/FIXED/OFF

Backlight OFF/BLC/HLC/DWDR

AGC LOW/MIDDLE/HIGH/OFF

DNR(3D) AUTO/LOW/MIDDLE/HIGH/OFF

Motion Detection ON/OFF(4 Zone)

Privacy Zone ON/OFF(8 Zone)

Mirror ON/OFF

Day & Night AUTO, COLOR, B/W

LED Brightness 24pcs, Smart IR

Blemish

Compensation AUTO/OFF

Lens f = 3.6mm f = 2.8 ~ 12mm

Power Supply 12VDC / 24VAC Dual Voltage

Current Consumption Max. 600mA (at 12VDC / 24VAC)

Operation Temp. -49°F~122°F

Dimension Ø130.8(W) x 96(H) mm

Weight 14.5 oz

※The specification is subject to change without any prior

notice to improve the quality.

◈FUNCTION SETTING

1. How to use the jog lever

①SET :Used to access the menu and confirm

selection.

②UP, DOWN :③ Used to move the cursor to up or

down.

④LEFT, RIGHT :⑤ Used to move the cursor to left

or right and change the value.

⑥EXT-VIDEO :Additional video output terminal for

test monitor during installation.

⑦DEBUG PORT : It is used for upgrading the product

function and after-sales services.

HLED31D1B, HLED31D1W

HLED31D7B, HLED31D7W

ROTATION

U

D

R

L

LED COVER

DISK

CAMERA

HOLDER

DOME COVER ASS’Y

CAMERA

MODULE ASS’Y

SCREW

HARNESS

LED COVER

ASS’Y

SCREW

CONTROL PCB ASS’Y

PUSH BUTTON

DISK

BASE CABLE

Ø109

48.1

101

Ø130.8

Ø100

Protection sheet

LATCH BUTTON

SCREW TP1

3.5X20 2EA

SCREW TP1

3.5X20 2EA

Product specificaties