Sovereign SCS 37/1 Handleiding
Sovereign
Zaagmachine
SCS 37/1
Bekijk gratis de handleiding van Sovereign SCS 37/1 (24 pagina’s), behorend tot de categorie Zaagmachine. Deze gids werd als nuttig beoordeeld door 40 mensen en kreeg gemiddeld 5.0 sterren uit 20.5 reviews. Heb je een vraag over Sovereign SCS 37/1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/24
SCS 37/1
Original operating instruction
Petrol Chain Saw
" WARNING! PLEASE READ THESE INSTRUCTIONS
BEFORE OPERATING THIS UNIT"
"KEEP THIS MANUAL FOR FUTURE REFERENCE”
2
Helpline No: UK 0151 649 1500 / IRE 189 094 6244
Read and follow the operating instructions and safety
information before using for the first time.
Always wear PPE (Personal Protective Clothing).
Wear gloves!
Wear safety shoes!
Wear a safety helmet, eye and ear protection!
Please read these instructions carefully
before installing and operating the
petrol motor scythe!
Petrol Engine Quick Start Guide
Ensure correct fuel/oil mixture 40:1
STARTING
1. Set the On/Off switch to “On (I)” to start the
machine.
2. Pull out the throttle lever until it locks.
3. Push the primer bulb 10 times.
4. Place saw on a firm, flat surface. Hold saw
firmly as shown. Pull starter rapidly 2 times.
Beware of moving chain!
5. Push in the throttle lever as far as it will go .
Note - the amount of Choke will vary slightly
depending on the weather conditions, a small
amount of experimentation is advised.
6. Hold saw firmly and pull starter rapidly 4
times. Engine should start.
7. Let the engine run for 10 seconds to warm
up. Press the throttle lever briefly, the engine
will go to “idling” speed.
Note - this quick start guide is intended for
experienced users who have already
assembled the tool, please refer to the
manual for details.
If machine does not start after minimum 6 pulls
on starter cord refer to petrol Engine Q & A on
page 21.
3
Helpline No: UK 0151 649 1500 / IRE 189 094 6244
Product specificaties
| Merk: | Sovereign |
| Categorie: | Zaagmachine |
| Model: | SCS 37/1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Sovereign SCS 37/1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaagmachine Sovereign
16 November 2024
9 Juni 2023
28 Mei 2023
20 Mei 2023
19 Mei 2023
18 Mei 2023
Handleiding Zaagmachine
- Ferrex
- Trotec
- Solo
- Avantco
- BabyGO
- Toolson
- Spear & Jackson
- Batavia
- Black Decker
- Draper
- Sun Joe
- Gude Pro
- Porter-Cable
- Donau Elektronik
- Evolution
Nieuwste handleidingen voor Zaagmachine
15 Juni 2025
15 Juni 2025
10 Juni 2025
10 Juni 2025
9 Juni 2025
7 Juni 2025
5 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025