SoundTube CM62-EZ-II Handleiding

SoundTube Speaker CM62-EZ-II

Bekijk gratis de handleiding van SoundTube CM62-EZ-II (4 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.6 sterren uit 8 reviews. Heb je een vraag over SoundTube CM62-EZ-II of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/4

Warning

Do not spec or install speaker near support beam, ventilation

duct or other structure that may interfere with speaker function

or dispersion.

Warning

SoundTube speakers must be installed by a professional audio

installer/contractor. For safety and for optimum audio performance,

installer must follow all directions issued by SoundTube Entertainment.

1.435.647.9555

800.647.TUBE

www.soundtube.com

70.7 Volt Transformer Taps (dB) 100 Volt Transformer Taps (dB) 25 Volt Transformer Taps (dB)

20W=103, 10W=100, 5W=97, 2.5W=94, 1.25W=91 20W=103, 10W=100, 5W=97, 2.5W=94 2.5W=94, 1.25W=91, .63W=88, .32 W=85, .16W=82

CM-EZ-II

Transformer Taps Settings

Install Instructions

Voice Coil

8 Ohm=106 dB

Box contents

1 Speaker

1 Flexible conduit clamp

1 Tile bridge

(shipped separate)

CM-EZ-IICM-E

CM-E

Z-II

CM-EZ-II

Snap cam

Grille bezel

Sheetrock/tile

Signal wires

Tap switch

20 W, 10 W, 5 W, 2.5 W, 1.25 W, voice coil/8 Ohm direc

Blind-mount

backcan

Safety cable stud

Flexible conduit clamp

Tile bridge

9.75" (248 mm)

1.435.647.9555

800.647.TUBE

www.soundtube.com

Drop Tile Ceiling Install Instructions

CM-EZ-II

CM-EZ-IICM-E

CM-E

Z-II

4. Set tap to proper setting.

CM-EZ-8 is factory preset

in the 70.7 Volt mode in

the 20 Watt setting.

7. Thread tap & signal wires

thru flexible conduit clamp.

Connect wires with wire

nuts. See tap settings on

front page of this manual

for proper settings.

8. Push connections and

terminated tap wires

into backcan. Push

flexible conduit clamp

into backcan and tighten

clamp onto conduit.

2. Using supplied tile bridge,

mark

9 9/16" (243 mm) hole.

6. Set entire assembly

facing down on top of

ladder. Pull signal wire

down to speaker.

3. Cut hole in tile using key-

hole saw or Roto-Zip tool.

1. Remove ceiling tile.

5. Lay tile bridge & tile on

floor with tile facing up.

Set speaker unit in hole

and lift ceiling tile & tile

bridge as a unit until

speaker snaps into place.

9. Install assembly into

ceiling tile rails.

10. Done! To Uninstall Speaker

1. Remove grille and

locate brass release

pins (x4).

2. Using a screwdriver, push

release pin up to release

cam. Turn clockwise

until threads engage to

lock cam. Properly term-

inate signal wire in ceiling.

Product specificaties

Merk:	SoundTube
Categorie:	Speaker
Model:	CM62-EZ-II
Kleur van het product:	Zwart
Gewicht:	4690 g
Hoogte:	8.6 mm
Breedte verpakking:	330.2 mm
Diepte verpakking:	336.55 mm
Hoogte verpakking:	203.2 mm
Materiaal behuizing:	Acrylonitrielbutadieenstyreen (ABS)
Internationale veiligheidscode (IP):	IPX3
Type verpakking:	Doos
Connectiviteitstechnologie:	Bedraad
Diameter:	298.5 mm
Type stroombron:	AC
Gemiddeld vermogen:	50 W
Certificering:	CE, EN54, RoHS, UL1480A, UL2043
Aantal per verpakking:	1 stuk(s)
Aanbevolen gebruik:	Thuis
Impedantie:	17.9 Ohm
Audio-uitgangskanalen:	- kanalen
Speaker plaatsing:	Inbouw in de muur/plafond
Woofer:	Ja
Frequentiebereik:	65 - 22000 Hz
Gevoeligheid:	90 dB
Luidspreker soort:	2-weg
Speaker omsluiting:	Gesloten
Diameter woofer:	6.5 "
Aantal woofer drivers:	1
Diameter hogetonenluidspreker:	1 "
Aantal tweeter drivers:	1
Tweeter:	Ja
Crossover frequentie:	4000 Hz
Roostermateriaal van luidspreker:	Staal