Sound Devices A20-Opto Handleiding
Sound Devices
Niet gecategoriseerd
A20-Opto
Bekijk gratis de handleiding van Sound Devices A20-Opto (13 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 49 mensen en kreeg gemiddeld 4.7 sterren uit 25 reviews. Heb je een vraag over Sound Devices A20-Opto of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/13
ASTRAL®
A20-Opto
Installation Instructions
Table of Contents
A20-Opto for A20-SuperNexus 3
Parts Included for Installation 3
Installation 4
Warranty 12
Legal Notices 13
A20-Opto User Guide 2
A20-Opto for A20-SuperNexus
The A20-Opto is an optional expansion box for the SuperNexus that adds Optocore, MADI, AES, and analog outputs plus GPIO
A20-
functionality. The A20-Opto comes in two versions, the A20-Opto-HMA and A20-Opto-ST. The only difference between the
A20-Opto-HMA and A20-Opto-ST is the connector type used for the Optocore audio outputs, HMA or ST respectively. Photos in this
guide are for the A20-Opto-HMA, but installation of an A20-Opto-ST is identical
The A20-Opto connects to the SuperNexus via a multi-pin connector located on the bottom of SuperNexus. Optocore
A20- A20-
output channels carry audio outs 1-64. The A20-Opto has 2x MADI outputs on 2x BNC connectors. At 48k, both MADI Outputs are
hardwired to audio outs 1-64. At 96k, MADI Out 1 carries 1-32 and MADI Out 2 carries 33-64.For 96 kHz applications, the MADI
outputs can be configured as Hi-Speed or SMUX 96k MADI format. The 32-channel Analog and AES digital (AES72 Type 1M)
Outputs are configured as a redundant set of outputs that are fed from the same sources routed to the analog and digital outputs on
the SuperNexus.
A20-
When connected to an A20-SuperNexus:
● Power is shared between both units. Either is capable of powering the entire assembly. Both can be connected to power
for redundancy.
● Control of the A20-Opto is from the A20-SuperNexus menus. Go to Audio -> A20-Opto Setup.
● Firmware versions on both must match and the firmware update is performed on the A20-SuperNexus
○ It’s best practice to update the A20-SuperNexus firmware after the A20-Opto is connected to ensure the
firmware is in sync.
See the A20-SuperNexus User Guide for complete operational instructions.
Parts Included for Installation
● 1.5 mm hex wrench
● 2.5 mm hex wrench
● Bridge board assembly
● Double rack ear assembly (rack ears, rear mounting bracket, 16 screws)
A20-Opto User Guide 3
Product specificaties
| Merk: | Sound Devices |
| Categorie: | Niet gecategoriseerd |
| Model: | A20-Opto |
Heb je hulp nodig?
Als je hulp nodig hebt met Sound Devices A20-Opto stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Sound Devices
11 Januari 2025
4 September 2023
17 Augustus 2023
17 Augustus 2023
17 Augustus 2023
Handleiding Niet gecategoriseerd
- Char-Broil
- Albert Heijn
- Icon
- Easyrig
- SWIT
- AvMap
- Kidde
- Motu
- KRK
- Petzl
- Tech 21
- Clarion
- MID49
- RugGear
- Kora
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025