Sony Walkman NWZ-F806 Handleiding

Sony Mediaspeler Walkman NWZ-F806

Lees hieronder de 📖 handleiding in het Nederlandse voor Sony Walkman NWZ-F806 (4 pagina's) in de categorie Mediaspeler. Deze handleiding was nuttig voor 59 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Quick Start Guide

How to Install the Supplied Software

How to Use Your “WALKMAN”

How to Install the Supplied Software

(Including Help guide)

1 Connect your Walkman to a running computer

using the supplied USB cable. Plug in the USB

cable with facing upward, making sure the

connection is secure.

 Hint

 If [USB connected] appears on the screen, tap [Turn on USB storage] to connect

your Walkman.

If the following screen does not appear, swipe the status bar on the top of the

screen and tap [Turn on USB storage] on the notification panel.

Status bar

You can access your Walkman from the computer.

2 Select your Walkman on the computer.

Click [Start] - [Computer] or [My Computer] - [WALKMAN].

3 Double-click [Setup.exe].

The install wizard appears.

 Hint

 When you execute [Setup.exe], the [Setup.exe] file stored in the [WALKMAN]

folder of your Walkman is copied to your computer for backup, and the

WALKMAN Guide and Media Go are installed to your computer.

 If you changed the type of USB connection to a setting other than MSC mode,

change mode back to MSC mode again by tapping [Connected as USB Storage] on

the notification panel.

 If [Setup.exe] does not start, copy the [Setup.exe] file to your desktop, then

double-click it.

4 Follow the on-screen instructions.

After the install wizard finishes, the (WALKMAN Guide) icon

appears on the desktop of your computer. You can view the Help

guide by double-clicking the (WALKMAN Guide) icon and

clicking on the Help guide.

5 Start Media Go.

You can transfer content stored on your computer to your Walkman.

For details on transferring music, etc., refer to the Help guide.

 Hint

 You can start the WALKMAN Guide and Media Go from the [Start] menu (displayed by

clicking [Start]).

 You can install the supplied software on another computer through the following

procedure even if you delete the [Setup.exe] file by formatting the built-in flash memory

of your Walkman. Copy the [Setup.exe] file and the [Install] folder from the [Backup]

folder of your computer to the Walkman. Then, connect the Walkman to another

computer on which you want to install the software and follow the above procedure

from step 2.

The [Backup] folder can be found at

C:\Program Files\Sony\WALKMAN Guide\NWZ-F800\Backup

([Program Files(x86)] may be displayed depending on the computer OS.)

Contents

Please check the items in the package.

 “WALKMAN” (1)

 Headphones (1)

 Earbuds (Size S, L) (1)

At purchase, M size earbuds are installed.

 USB cable (1)

 Attachment (1)

Use when connecting your Walkman to a peripheral device, such as a cradle

(not supplied).

 Quick Start Guide (this manual)

 Software

The software is stored in the built-in flash memory of your Walkman, and

includes the following items. For details on how to install, see “How to Install

the Supplied Software (Including Help guide).”

 Media Go

 WALKMAN Guide

Help guide, etc.

About Windows Operating System

Make sure that the OS is Windows XP (Service Pack 3 or later), Windows Vista*

(Service Pack 2 or later) or Windows 7* (Service Pack 1 or later).

* [Compatibility mode] for Windows XP is not supported.

What You Can Do with Your “WALKMAN”

To enjoy music/videos/photos

You can transfer music from CDs and transfer videos and photos to your Walkman using

a computer.

To enjoy FM radio

You can listen to FM radio using the supplied headphones.

To enjoy Internet

Wi-Fi

You can browse the Internet and download applications by connecting to a Wi-Fi

network.

 Hint

 For details about this function or usage, refer to the Help guide (HTML document).

NWZ-F804/F805/F806

About the manuals

In addition to this Quick Start Guide, this model is accompanied by a Help

guide (HTML document) that gives detailed operating instructions.

To view on your “WALKMAN” screen:

See “How to Use the Help guide on Your “WALKMAN”.”

To view on a computer screen:

See “How to Install the Supplied Software (Including Help guide).”

You must accept the terms of the End User License Agreement when you use

your Walkman for the first time. To read them again later, tap the (Menu)

button - [System settings] - [ About device] - [Legal information] - [Sony

EULA].

Parts and Controls

 (Menu) button

 (Home) button

 (Back) button

 Headphone jack

 WM-PORT jack

Connect the USB cable (supplied), or other accessories that support WM-PORT

(not supplied).

 Speaker

 Strap hole

 Built-in microphone

 Built-in antenna

Wi-Fi, Bluetooth, and GPS antennas are built-in.

 Screen (touch screen)

Touch (tap) icons, items, control buttons, etc., on the screen to operate your

Walkman.

 VOL (Volume) +/– button

 (Double-u Dot) button

This is used to directly display the W.control.

 RESET button

Press the RESET button with a small pin, etc., to reset your Walkman.

 (Power) button

Hold down: Turns the power on/off.

Press: Turns the screen on/off.

About volume operation (Only for

countries/areas complying with European

Directives)

An alarm (beep)* and warning [Check the volume level] are meant to protect your

ears when you raise the volume setting beyond a specific level for the first time. You

can cancel the alarm and warning by tapping [OK] button on the alert dialog.

* The alarm (beep) does not sound when connecting a Bluetooth audio device.

Note

 You can turn up the volume beyond the specific level after canceling the alarm and

warning.

 After the initial warning, the alarm and warning repeat for every 20 cumulative hours

that the volume is set beyond the specific level; when this happens, the volume is

changed to the initial setting automatically.

 If the volume is set beyond the specific level and you turn off your Walkman, the

volume returns to the specific level automatically.

Initial Settings

1 Use the supplied USB cable to connect your

Walkman to a running computer and charge the

Walkman.

Your Walkman turns on.

Note

 If a large battery symbol is displayed while you

are charging your Walkman, the remaining

charge is still too low for your Walkman to

operate. The Walkman will start automatically

after being charged for about 10 minutes.

2 If the USB connected screen appears, tap the

(Back) button to quit the screen, and then

proceed to the initial settings.

The language selection screen* appears.

* Depending on where you purchased your Walkman, the language selection

screen may not appear.

3 Select the desired language to be used to display

the End User License Agreement.

4 Make sure that you understand the terms of the

license agreement then tap [Agree].

The initial setup screen appears.

5 Tap .

6 Select the desired language.

7 Tap to begin using your Walkman.

8 Set the Wi-Fi connection, Google account and

date/time, etc., following the instructions shown

on the screen.

 Hint

 Wi-Fi connection and Google account can also be set afterwards.

4-432-452- (1)11

Troubleshooting

If your Walkman does not function as expected, try the following steps to resolve

the issue.

1 Find the symptoms of the issue in “Troubleshooting” in the

Help guide (HTML document), and try any corrective

actions listed.

For details on connecting to a computer, see the table below.

2 Connect your Walkman to your computer to charge the

battery.

You may be able to resolve some issues by charging the battery.

3 Press the RESET button with a small pin,

etc.

Before resetting your Walkman, check that no song, video,

etc., is being played back. You can then reset the Walkman

safely.

4 Check information on the issue in the Help of software you

are using.

5 Look up information on the issue on one of the customer

support websites.

For customer support websites, see “For the latest information.”

6 If the approaches listed above fail to resolve the issue,

consult your nearest Sony dealer.

Symptom Cause/Remedy

Your Walkman is not

recognized as USB

storage.

 The USB connection is turned off.

 Swipe the status bar, then tap [Turn on USB

storage] on the notification panel followed by [Turn

on USB storage] then [OK].

 USB debugging is enabled.

 Some devices or software may not recognize your

Walkman when USB debugging is enabled. Tap the

(Menu) button, then tap [System settings] -

[ Developer options] - [USB debugging] and

uncheck the box.

The computer does not

recognize your Walkman

even if connected by

USB cable.

 The USB cable is not connected to a USB connector

on your computer properly.

 Disconnect the USB cable, and then reconnect it.

 Use the supplied USB cable.

 A USB hub is being used.

 Your Walkman may not be recognized by the

computer if using a USB hub. Connect the

Walkman directly to the computer’s USB port.

 The USB connector on your computer may have a

problem.

 Connect your Walkman to another USB connector

on your computer.

 When you use your Walkman for the first time, or

when the battery is low, the battery symbol may

display and you may not be able to use the Walkman.

This is not a malfunction. Wait for about 10 minutes

before attempting operations.

 Software authentication may take some time. Wait for

a while.

 Software installation failed.

 Reinstall the software using the installer. Imported

data will remain unchanged.

 If the problem still persists after performing the

remedies above, press the RESET button to reset your

Walkman.

Your Walkman becomes

unstable while it is

connected to the

computer.

 A USB hub or USB extension cable is being used.

 Your Walkman may be unstable if using a USB hub

or USB extension cable. Connect the Walkman

directly to the computer’s USB port.

Your Walkman gets

warm.

 Your Walkman may become warm when the battery

is being charged and just after charging. The

Walkman also may get warm temporarily when a

large amount of data is transferred. Set the Walkman

aside for a while to allow it to cool down.

To initialize (format) your “WALKMAN”

You can format the built-in flash memory of your Walkman. If the memory is

formatted, your data will be erased and all setting values will return to their

defaults.

Note

 If you execute this function, Google account information and downloaded

applications will be erased.

 If you tap and check [Erase USB storage] in step 2, the following data will be

erased: Music and photo data transferred to your Walkman; Preinstalled

content; the Setup.exe file stored in Walkman memory, for installation on

your computer. Be careful because the preinstalled content and the Setup.exe

file will not be offered again. It is best to back up such data to a computer

before initializing the Walkman.

 Do not format the built-in flash memory using Windows Explorer. If you

want to format the built-in flash memory, format it on your Walkman.

1 Tap the (Home) button to display the Home screen.

2 Tap the (Menu) button, and tap [System settings] -

[ Backup & reset] - [Factory data reset] -

[Reset device].

Tap and check [Erase USB storage] to delete transferred music, videos and

photos.

3 Tap [Erase everything].

Your Walkman restarts automatically after being initialized.

Precautions

About the headphones

 Avoid playing the unit at so loud a volume that extended play might affect your hearing.

 At a high volume outside sounds may become inaudible. Avoid listening to the unit in

situations where hearing must not be impaired, for example, while driving or cycling.

 As the supplied headphones are of open-air design, sounds go out through the

headphones. Remember not to disturb those close to you.

License and Trademark Notice

Refer to the Help guide (HTML document).

For users in France

When replacing the headphones/earphones, please refer to the model of the headphones/

earphones adapted to your unit that appears below.

MDR-EX0300E

At high volume, prolonged listening to the personal audio player can

damage the user’s hearing.

Owner’s Record

The model and serial numbers are located on the back of the player. Record them in the

space provided below. Refer to these numbers in the spaces whenever you call upon your

Sony dealer regarding this product.

Model No. ________________________

Serial No. ________________________

For the latest information

If you have any questions or issues with this product, or would like information on

compatible items with this product, visit the following websites.

For customers in the USA:

http://www.sony.com/walkmansupport

For customers in Canada:

http://esupport.sony.com/ca/

For customers in Europe:

http://support.sony-europe.com/DNA

For customers in Latin America:

http://www.sony-latin.com/index.crp

For customers in other countries/regions:

http://www.sony-asia.com/support

For customers who purchased the overseas models:

http://www.sony.co.jp/overseas/support/

Turning On/Off Your “WALKMAN”

Hold down.

Turning On/Off the Screen

The screen will turn off if no operations are made for a certain period of time.

1 Press the (Power) 

button.

The lock screen will be

displayed.

Press.

2 Drag from left to

right.

Your Walkman is then

unlocked, and the Home

screen appears.

Press the button again to

turn off the screen.

How to Use the Touch Screen

The Walkman screen is touch-sensitive. You can operate your Walkman by gestures

such as tapping, pressing, and flicking the screen. Refer to the Help guide (HTML

document) for details.

Tap Press and Hold

Flick Drag

Pinch in/pinch out

Home Screen

The Home screen is displayed by tapping the (Home) button.

 [Music player] widget

Play back music.

 Application shortcut

Starts application individually.

 [Music player] shortcut

Play back music files transferred by Media Go or drag and drop.

 [Video player] shortcut

Play back video files by intuitive operations.

 Apps

Displays all your applications and widgets.

 [Photo viewer] shortcut

View photos and slide shows.

 [FM radio] shortcut

Starts FM radio.

How to Use the Help guide on Your

“WALKMAN”

Start the Help guide installed on your Walkman.

The Help guide for viewing on your Walkman screen is provided only in some

languages.

1 Tap from the Home screen then [ Help

guide].

 Hint

 You can also read the Help guide on your computer by installing the supplied

WALKMAN Guide software on your computer.

RESET button

Product specificaties

Merk:	Sony
Categorie:	Mediaspeler
Model:	Walkman NWZ-F806

Heb je hulp nodig?

Als je hulp nodig hebt met Sony Walkman NWZ-F806 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Mediaspeler Sony

Sony Walkman NWZ-E353 Handleiding

26 Mei 2023

Sony Walkman NWZ-Z1040 Handleiding

20 Mei 2023

Sony Walkman NWZ-F806 Handleiding

12 Mei 2023

Sony Walkman NWZ-E474 Handleiding

12 Mei 2023

Sony MDX-C6500X Handleiding

28 April 2023

Sony MDX-100FP Handleiding

27 April 2023

Sony MDX-400FP Handleiding

23 April 2023

Sony MDX-40 Handleiding

22 April 2023

Sony MDX-C670 Handleiding

19 April 2023

Sony MDX-C7900 Handleiding

15 April 2023

Handleiding Mediaspeler

Nieuwste handleidingen voor Mediaspeler

Zappiti Player Mini Handleiding

14 April 2024

Zappiti Player Handleiding

14 April 2024

Zidoo UHD5000 Handleiding

28 Maart 2024

Maxell MMB 100 Handleiding

19 Maart 2024

SIIG CE-DS0111-S1 Handleiding

13 Maart 2024

Smart-AVI AP-SNCL-M40GS Handleiding

13 Maart 2024

Smart-AVI 4K-SNCL-V32GS Handleiding

12 Maart 2024

Omnitron Systems iConverter Gx AN Handleiding

11 Maart 2024

Omnitron Systems FlexPoint GX/T Handleiding

11 Maart 2024

Conceptronic CMED3PLUS Handleiding

11 Maart 2024