Sony VGP-PRUX1 Handleiding

Sony Overige computer accessoire VGP-PRUX1

Lees hieronder de 📖 handleiding in het Nederlandse voor Sony VGP-PRUX1 (2 pagina's) in de categorie Overige computer accessoire. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Operating Instructions
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
• Use your product only with the AC adapter supplied with your personal
computer.
• To disconnect it completely from the main voltage, unplug the AC adapter.
• Make sure that the socket outlet is easily accessible.
For customers in the USA
Owner’s Record
The model number and serial number are located on the bottom of your
port replicator. Record the serial number in the space provided here. Refer
to the model and serial number when you call your Sony Service Center.
Model No. VGP-PRUX1
Serial No. ——————————
WARNING
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference using one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Only peripherals (computer input/output devices, terminals, printers, etc.)
that comply with FCC Class B limits, may be attached to this computer
product. Operation with non-compliant peripherals is likely to result in
interference to radio and television reception.
All cables used to connect peripherals must be shielded and grounded.
Operation with cables, connected to peripherals, that are not shielded and
grounded, may result in interference to radio and television reception.
If you have any questions about this product, you can reach the Sony
Customer Infomation Service Center at 1-888-476-6972 in the United States
or 1-800-961-7669 in Canada; or write to the Sony Customer Information
Service Center at 12451 Gateway Blvd, Ft. Meyers, FL 33913, or find Sony
Customer Service on the Web at
http://www.sony.com/pcsupport.
Declaration of Conformity
Trade Name: SONY
Model No.: VGP-PRUX1
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.: 858-942-2230
(This phone number is for FCC-related matters only.)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• VAIO and are trademarks of Sony Corporation.
• i.LINK is a designation referring to IEEE 1394-1995 and IEEE 1394a-2000.
i.LINK and the i.LINK logo “ ” are trademarks of Sony Corporation.
Before use
Before using the port replicator, please read this manual thoroughly and
retain it for future reference. See also the manuals provided with your
personal computer for more information about connecting the port
replicator.
The Sony VGP-PRUX1 port replicator is designed for Sony personal
computers. However, it may not be used with some models.
2-694-689- (1)12
Port Replicator
VGP-PRUX1
Printed on 70% or more recycled paper using VOC
(Volatile Organic Compound)-free vegetable oil based ink.
© 2006 Sony Corporation / Printed in Japan
S400
Continue to next page
Specifications
Connectors Port replicator connector: Custom connector (1)
USB: Type-A connector (3)*
i.LINK (IEEE 1394): S400 4-pin (1)
External display output:
MONITOR ( ): Analog RGB, VGA, D-sub 15-pin (1)a
AV OUT (T): compatible with NTSC/PAL,
stereo mini jack (1)
LAN connector: LAN (100BASE-TX/10BASE-T) (1)*
* The specifications are the same as those of the personal
computer you are using. For details, refer to the manuals
provided with your personal computer.
Power requirements
AC adapter**
** Use the unit with an AC adapter (VGP-AC16V7) that is
compatible with your personal computer.
Operating temperature
41°F to 95°F (5°C to 35°C)
(temperature gradient less than 18°F (10°C)/hour)
Operating humidity
20% to 80% (not condensed), provided that humidity is
less than 65% at 95°F (35°C)
(hygrometer reading of less than 84°F (29°C))
Storage temperature
–4°F to 140°F (–20°C to 60°C)
(temperature gradient less than 18°F (10°C)/hour)
Storage humidity
10% to 90% (not condensed), provided that humidity is
less than 20% at 140°F (60°C)
(hygrometer reading of less than 95°F (35°C))
Dimensions Approx. 6.0 (w) 4.6 (d) inches× 2.9 (h) ×
(Approx. 150.2 × 71.9 × 114.7 mm)
Mass Approx. 8.8 oz. (249 g)
Supplied accessories
Operating instructions (1)
Holder (1)***
***When using the unit, attach the holder. For details on how to
attach it, refer to the manuals provided with your personal
computer.
Design and specifications are subject to change without notice.
Notes on use
• Use the unit with an AC adapter that is compatible with your personal
computer. See also the manuals provided with your Sony personal
computer for more information.
• To disconnect the unit completely from the main voltage, unplug the AC
adapter.
• Make sure that the socket outlet is easily accessible.
• Do not place the unit in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Vibrating
– Subject to strong magnetic fields
– Sandy
– Subject to direct sunlight
• Do not apply mechanical shock or drop the unit.
• Make sure that nothing metallic comes into contact with the metal parts
of the unit. If this happens, a short-circuit may occur and the unit may be
damaged.
• Do not operate the unit with a damaged cord.
• Do not operate the unit if the unit itself has been dropped or damaged.
• Always keep the metal contacts clean.
• Do not disassemble or convert the unit.
• While in use, it is normal for the unit to get warm.
• Keep the unit away from TV or AM receivers, because it can disturb TV
or AM reception.
• i.LINK, USB, PC card slot, Printer, DVI-D and MONITOR connectors are
not supplied with Limited Power Sources if those connectors are
provided.
• When connecting or disconnecting the unit, handle it carefully.
• When transporting the unit, prevent foreign objects from causing a
malfunction by using the battery pack, the connector covers and the
supplied slot protectors if there is any.
• When transporting your personal computer, be sure to remove the unit
first. Moving your personal computer with the unit installed could cause
the unit to fall off, resulting in personal injury, or damage to the unit or
your personal computer.
• When transporting the unit, detach the holder.
• If there are any dust or dirt particles on the port replicator connector,
your personal computer may not be able to detect the port replicator
when it is connected (even if the particles are invisible to the eye).
If the connection seems to be poor, remove the AC power adapter and
battery and wipe off the connector and the area around it on both the
personal computer and port replicator. Commercial air dusters are also
effective for blowing away residual dust and dirt.
Be careful not to damage the connectors while cleaning them.
On cleaning
Clean the unit with a soft dry cloth or a soft cloth lightly moistened with a
mild detergent solution. Do not use any type of solvent, such as alcohol or
benzine, which may damage the finish.

Product specificaties

Merk: Sony
Categorie: Overige computer accessoire
Model: VGP-PRUX1

Heb je hulp nodig?

Als je hulp nodig hebt met Sony VGP-PRUX1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Overige computer accessoire Sony

Sony

Sony PCWA-A220 Handleiding

18 Juni 2023
Sony

Sony GDM-500PS Handleiding

14 Juni 2023
Sony

Sony GDM-FW9011 Handleiding

31 Mei 2023
Sony

Sony PCGA-CCGX Handleiding

28 Mei 2023
Sony

Sony GDM-F520 Handleiding

15 Mei 2023
Sony

Sony GDM-C520 Handleiding

15 Mei 2023
Sony

Sony PRSA-CL1 Handleiding

12 Mei 2023
Sony

Sony PCGA-BP4V Handleiding

12 Mei 2023
Sony

Sony PCGA-CC1A Handleiding

12 Mei 2023
Sony

Sony PCGA-AC19V1 Handleiding

11 Mei 2023

Handleiding Overige computer accessoire

Nieuwste handleidingen voor Overige computer accessoire

Micro Connect

Micro Connect USB3.1CCOM16 Handleiding

31 Maart 2024
Icy Box

Icy Box IB-DK4061-CPD Handleiding

25 Maart 2024
Sabrent

Sabrent HB-TBT4 Handleiding

25 Maart 2024
Sonnet

Sonnet GPU-RX57-TB3-S Handleiding

19 Maart 2024
CLUB3D

CLUB3D CSV-1596 Handleiding

19 Maart 2024
CLUB3D

CLUB3D SenseVision USB3.0 Y-Cabled Docking Station CSV-3203 Handleiding

19 Maart 2024
CLUB3D

CLUB3D CSV-1566 Handleiding

19 Maart 2024
I-Tec

I-Tec C31HDMIDPDOCKPD65 Handleiding

19 Maart 2024
CLUB3D

CLUB3D CSV-1568 Handleiding

19 Maart 2024
Sonnet

Sonnet GPU-RX55-TB3-S Handleiding

19 Maart 2024