Sony TA-VE810G Handleiding
Sony
Audio en video
TA-VE810G
Lees hieronder de đź“– handleiding in het Nederlandse voor Sony TA-VE810G (194 pagina's) in de categorie Audio en video. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/194
© 1997 by Sony Corporation
3-861-065-11(1)
TA-VE810G
Integrated AV
Amplifier
Operating Instructions
Mode d’emploi
Gebruiksaanwijzing
Bruksanvisning
GB
F
NL
S
2GB
WARNING
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
To avoid electrical shock, do not open
the cabinet. Refer servicing to qualified
personnel only.
This amplifier incorporates the
Dolby* Pro Logic Surround system.
* Manufactured under license from
Dolby Laboratories Licensing
Corporation. DOLBY, the double-D
symbol a, “AC-3” and
“PRO LOGIC” are trademarks of
Dolby Laboratories Licensing
Corporation.
Precautions
On safety
• Should any solid object or liquid fall
into the cabinet, unplug the amplifier
and have it checked by qualified
personnel before operating it any
further.
On power sources
• Before operating the amplifier, check
that the operating voltage is identical
with your local power supply. The
operating voltage is indicated on the
nameplate at the rear of the amplifier.
• This unit is not disconnected from the
AC power source (mains) as long as it
is connected to the wall outlet, even if
the unit itself has been turned off.
• If you are not going to use the
amplifier for a long time, be sure to
disconnect the amplifier from the wall
outlet. To disconnect the mains lead,
grasp the plug itself; never pull the
cord.
• AC power cord must be changed only
at the qualified service shop.
On placement
• Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
• Place the amplifier in a location with
adequate ventilation to prevent heat
buildup and prolong the life of the
amplifier.
• Do not place the amplifier near heat
sources, or in a place subject to direct
sunlight, excessive dust or mechanical
shock.
• Do not place anything on top of the
cabinet that might block the
ventilation holes and cause
malfunctions.
On operation
• Before connecting other components,
be sure to turn off and unplug the
amplifier.
On cleaning
• Clean the cabinet, panel and controls
with a soft cloth slightly moistened
with a mild detergent solution. Do not
use any type of abrasive pad, scouring
powder or solvent such as alcohol or
benzine.
If you have any question or problem
concerning your amplifier, please
consult your nearest Sony dealer.
About This Manual
This manual is divided into three
sections; Getting Started, On-screen
Operations and Front Panel
Operations.
The “Getting Started” section
describes connections, how to set up
the remote for on-screen control, and
Dolby Pro Logic Surround.
The “On-Screen Operations” section
describes how to operate the
amplifier using the remote to
manipulate the on-screen display on
your TV screen. The remote lets you
perform almost all of the amplifier
operations.
You can also control the amplifier
without the remote. The “Front
Panel Operations” section describes
how to operate the amplifier using
the front panel controls and remote
short-cut buttons.
The following icon is used in this
manual: Indicates hints and tips for
making the task easier.
z
3GB
Table of contents
Welcome! 4
Hooking Up the System
Hookup Overview 5
Infrared (IR) Repeater Hookups 6
Audio Component Hookups 6
Speaker System Hookups 7
TV/VCR Hookups 8
AC Hookups 10
Setting Up the Remote for On-Screen Control
Using the Remote 11
Registering a TV (or Monitor) 13
Registering Audio and Video Components 15
Dolby Pro Logic Surround Setup
What is Dolby Pro Logic Surround? 18
Adjusting the Speaker Volume 19
Playback/Recording
Selecting a Component 20
Watching TV or Video Programmes 21
Recording 22
Sound Adjustment
Using the Pre-programmed Sound Field 24
Customizing the Sound Fields 25
Additional Operations and Settings
Registering Desired Component (User IR setting) 28
Indexing 29
Playing Sources Automatically (Auto Play) 30
Starting a Source Automatically at Power On (Auto Start) 30
Starting Several Components in Sequence Automatically
(Macro Play) 31
Adjusting the Sensitivity of the Remote 32
Changing the Display Settings 32
Using the Sleep Timer 34
Operating a CD Changer 34
Front Panel Operations
Front Panel Descriptions 37
Remote Descriptions 38
Selecting a Component 38
Recording 39
Adjusting the Sound 40
Customizing the Amplifier Operations 41
Indexing 42
Playing Components Without the TV (Flasher) 42
Additional Information
Troubleshooting 44
Specifications 46
Glossary 47
Index 48
Getting Started On-Screen Operations Front Panel
Operations
GB
F
NL
S
Product specificaties
| Merk: | Sony |
| Categorie: | Audio en video |
| Model: | TA-VE810G |
Heb je hulp nodig?
Als je hulp nodig hebt met Sony TA-VE810G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Audio en video Sony
22 December 2022
21 December 2022
19 December 2022
17 December 2022
8 December 2022
7 December 2022
2 December 2022
30 November 2022
30 November 2022
30 November 2022
Andere handleidingen Sony
26 April 2024
26 April 2024
26 April 2024
26 April 2024
26 April 2024
26 April 2024
26 April 2024
26 April 2024
26 April 2024
26 April 2024