Sonel PAT-2 Handleiding
Sonel
Meetinstrumenten
PAT-2
Bekijk gratis de handleiding van Sonel PAT-2 (5 pagina’s), behorend tot de categorie Meetinstrumenten. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.4 sterren uit 8.5 reviews. Heb je een vraag over Sonel PAT-2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5
page 1 / 5 sonel.com
• LED test results indication
• quick access to the measurement procedures
• compact design and ergonomic soft case
• automatic measurement range selection
• measurement of protective conductor resistance with
the currents:
» PAT-2 •PAT-2E PAT-10 | •200 mA,
»PAT-10 | 200 mA, 10 A
• insulation resistance measurement:
» PAT-2 •PAT-2E PAT-10 | •250 V
»PAT-2E PAT-10 | •250 V, 500 V
• PRCD trip time testing
• measurement of equivalent, touch and differential
leakage current
• measurement of mains voltage
• IEC lead test
• saving results to the memory
• printing labels with measurement results (option)
• works with software: and Sonel Reader Sonel
PATAnalysis
• works with Sonel PAT Analysis Mobile application
LED test results
indication
(PASS / FAIL)
Quick access to the
measurement procedures
Portable Appliance Testers
PAT-10 / 2E / 2
index: WMGBPAT10 / WMGBPAT2E / WMGBPAT2
Security at hand
Features
PAT-10
START
Full autotest procedure
after pressing
START
Visual test
Measurements
Saving to
memory/printing
page 2 / 5 sonel.com
Standards
The tester can be used to test the equipment performance in accordance with
standards:
• EN 50699:2021 Recurrent tests of electrical equipment
• EN 60745-1 Hand-held motor-operated electric tools. Safety. General requirements
• EN 61029 Safety of transportable motor-operated electric tools - Generalre-
quirements
• EN 60335-1 Household and similar electrical appliances -Safety - Part 1: Gen-
eral requirements
• EN 60950 Safety of information technology equipment (IT Equipment)
• AS/NZS 3760:2010 In-service safety inspection and testing of electri-
calequipment
• VDE 0404-1 Prüf- und Messeinrichtungen zum Prüfen der elektrischen Sicher-
heit von elektrischen Geräten. Teil 1: Allgemeine Anforderungen
• VDE 0404-2 Prüf- und Messeinrichtungen zum Prüfen der elektrischen Sich-
erheit von elektrischen Geräten. Teil 2: Prüfeinrichtungen für Prüfungen nach
Instandsetzung, Änderung oder für Wiederholungsprüfungen
• VDE 0701-0702 Prüfung nach Instandsetzung, Änderung elektrischer Geräte.
Wiederholungsprüfung elektrischer Geräte. Allgemeine Anforderungen für die
elektrische Sicherheit
Capabilities
The PAT-10, PAT-2E and PAT-2 meters are an innovative combination of small
dimensions (allowing full mobility) with advanced measuring systems, provid-
ing -fully automatic measurements of electrical devices, IEC cables and exten
sion cords - also those with PRCD.
A set of tests is made with just one press of the START button. Conguration
options allow to modify meter’s work mode, and thus - to better tailor it to us-
er’s needs.
PAT instruments are equipped with a manual measurement mode. It is useful
in situations where individual test is sufcient instead of a complex measure-
ment sequence.
All instruments enable basic tests without external power supply: simplied
test sets are available in battery mode.
Small dimensions, light weight and a specially designed bag for the meter and
accessories provide both convenience and high mobility. Wireless communi-
cation with the printer allows free measurement place arrangement without
tangled wires. Meter’s memory and integration with PC software additionally
extends the functionality of the instruments.
page 3 / 5 sonel.com
Sonel PAT Analysis Mobile
The mobile application extends the capabilities of Sonel
PAT-10, PAT-2E, PAT-2 testers series. It available on de-
vices with Android operating system (version 5.0+).
Sonel PAT Analysis Mobile:
• connects wirelessly to the selected tester and printer,
• downloads measurement results,
• saves results to PAT memory structure (client, applianc-
es and measurement data),
• prints reports and QR codes,
• reads QR codes of the PAT system,
• sends data via internet.
Sonel PAT Analysis
This software is intended for companies that perform
safety measurements of electrical equipment.
Applications are compatible with Sonel PAT-series testers.
Data saved by the meter is entered into the test report for
the selected item of equipment.
• Perfect for production plants, electrical tool rental services,
repair and maintenance services, etc.
• Hierarchical data entry structure - a device is assigned to a
specic company or department.
• Capability of gathering information about a given piece of
equipment.
• Tracking the test history of a device.
• Capability of advanced meter conguration via software.
• Label printing on standard adhesive papers.
• Capability of creating a custom measurement standard us-
ing the report editor.
• Capability of scheduling measurements - every device con-
tains a “Measurement cycle” list - the application automat-
ically displays devices whose testing deadline is approach-
ing or has expired.
Report printing according to the following standards:
• VDE 0701:1, VDE 0701:200, VDE 0701:240, VDE 0701:260,
DIN VDE 0702, EN 61010, EN 60335, EN 60950, IEC 60601,
EN62353
Product specificaties
| Merk: | Sonel |
| Categorie: | Meetinstrumenten |
| Model: | PAT-2 |
Heb je hulp nodig?
Als je hulp nodig hebt met Sonel PAT-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Meetinstrumenten Sonel
17 Maart 2023
17 Maart 2023
17 Maart 2023
Handleiding Meetinstrumenten
- Skandia
- Profitec
- Gossen Metrawatt
- Psiber
- Brandson
- Uni-Trend
- Skil
- Bresser
- Bushnell
- Probuilder
- Beha-Amprobe
- Ferrex
- Hema
- Defort
- Elma
Nieuwste handleidingen voor Meetinstrumenten
4 Oktober 2023
4 Oktober 2023
4 Oktober 2023
4 Oktober 2023
4 Oktober 2023
4 Oktober 2023
4 Oktober 2023
4 Oktober 2023
4 Oktober 2023
4 Oktober 2023