Sonance PS-60XF Handleiding

Sonance Controller PS-60XF

Lees hieronder de 📖 handleiding in het Nederlandse voor Sonance PS-60XF (1 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
DESCRIPTION
The Sonance Professional Series PS-60XF Transformer
is a line matching transformer that matches the
impedance of any 8 Ohm Sonance speaker for
70V/100V system configurations. The PS-60XF has
multiple input taps for dierent wattage requirements.
Use this product in projects where a Sonance 8 Ohm
speaker is desired but the system is comprised of
other 70V/100V speakers on a 70V/100V amplifier.
These system configurations are typical of commercial
applications or residential spaces where many speakers
are connected to a single amplifier for coverage in
large areas or where speaker placement is over a great
distance, requiring long speaker wire runs. 70 volt
systems are great for commercial applications such as
restaurants, hospitality, and amusement parks but are
also frequently used in residential outdoor applications.
They are ideal for covering large areas and maintaining
a consistent volume level.
BOX CONTENTS
(1) Professional Series 60 Watt 70V/100V Transformer
(1) Installation Manual
1.85" ( mm)47
1.48" (37.5
mm)
TOP VIEW
2.86" (72.7mm)
0.37" (9.3mm)
0.61" ( mm)4.1
BOTTOM VIEW
2.34" (59.5mm)
2.01" ( mm)51
0.04" ( mm)0.9
3.5 mm)2" (89.4
FRONT VIEW
1.05" ( mm)26.7
1.61" ( mm)29.5
0.39" ( mm)10
SIDE VIEW
Primary Voltage:
Power Rating:
Primary Taps (70V):
100V Taps:
Secondary Impedance:
Insertion Loss:
Frequency Response:
Lead Length:
Weight:
Mounting Dimensions:
Mounting Method:
TECHNICAL SPECIFICATIONS
70V
60W
7.5W, 15W, 30W, 60W
15W, 30W, 60W, NC
6 Ohms
1.8dB
20Hz - 17kHz +/- 3dB
6”
1.19 lbs
3.52” W x 1.85” D x 2.01” H
(89.4mm x 47mm x 51mm)
Surface mounted using
built in mounting holes
(hardware not included)
PROFESSIONAL SERIES
PS-60XF 70V/100V
Transformer Manual
INSTALLATION INSTRUCTIONS
1. Review the wiring diagram on page 2 to determine
the desired wattage and wire taps for your speaker
installation.
2. Once the desired wattage has been selected, use
electrical tape or wire nuts to conceal the exposed
ends of the remaining, unused wire selections
labeled “To Amplifier”. DO NOT conceal the black
(-) common wire. This will be used in addition to
your selected color wire.
NOTE: BE SURE TO COVER EACH OF THE UNUSED
“TO AMPLIFIER” WIRES TO PROTECT THE SPEAKER
FROM POSSIBLE DAMAGE FROM HOT WIRES
TOUCHING THE TRANSFORMER OR OTHER METAL
SURFACE.
3. Connect the green and yellow wires labeled “To
Speaker” to your 8 Ohm Sonance speaker,
connecting the green wire to (-) and the yellow wire
to (+).
4. Secure the PS-60XF transformer to the equipment
location or speaker location by using bolts or screws
(not supplied) through the mounting holes of the
transformer.
5. Use the selected wire tap and the Common (black)
wire to connect to your 70V/100V amplifier,
connecting the Common (black) wire to the negative
(-) terminal, and the other color wire to the positive
(+) terminal.
6. Once all four connections are made (two to the
speaker and two to the amplifier), proceed to
connecting the remaining speakers in the system to
the amplifier and configure as you would in any
typical 70V/100V system.

Product specificaties

Merk: Sonance
Categorie: Controller
Model: PS-60XF

Heb je hulp nodig?

Als je hulp nodig hebt met Sonance PS-60XF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Controller Sonance

Sonance

Sonance PS-60XF Handleiding

26 November 2022

Handleiding Controller

Nieuwste handleidingen voor Controller

HyperX

HyperX ChargePlay Clutch Charging Grips Handleiding

25 April 2024
Victrix

Victrix Pro FS-12 Handleiding

25 April 2024
Circle

Circle with Disney Handleiding

18 April 2024
Genesis

Genesis Mangan 200 Handleiding

16 April 2024
Genesis

Genesis Mangan 300 Handleiding

16 April 2024
Reely

Reely Sky-series-12A Handleiding

16 April 2024
Hori

Hori Tactical Assault Commander Handleiding

16 April 2024
BeamZ

BeamZ WTR10 Handleiding

15 April 2024
Datapath

Datapath VSN1182 Handleiding

8 April 2024
Datapath

Datapath VSN982 Handleiding

8 April 2024