Sommer GIGAroll 300 Nm Handleiding
Sommer
Garagepoortopener
GIGAroll 300 Nm
Bekijk gratis de handleiding van Sommer GIGAroll 300 Nm (19 pagina’s), behorend tot de categorie Garagepoortopener. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.3 sterren uit 2 reviews. Heb je een vraag over Sommer GIGAroll 300 Nm of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/19
EN
Translation of the Original Installation and Operating Manual 1 - 19
GIGAroll_S11338-00001_402017_0-DRE_Rev-A_EN
GIGAroll 300 Nm - 1400 Nm
2
Table of contents
General information ...................................................... 3
Symbols ........................................................................................... 3
Safety instructions ............................................................................ 3
Intended use .................................................................................... 3
Type designations ............................................................................ 4
Technical data .................................................................................. 5
Dimension drawings ......................................................................... 6
Declaration of Installation ............................................. 8
Installation preparations ............................................... 9
Safety instructions ............................................................................ 9
Personal protective equipment ......................................................... 9
Fastening dimensions of the console ............................................... 9
Installation .................................................................... 10
Safety instructions .......................................................................... 10
Information on installation .............................................................. 10
Installing the operator ..................................................................... 10
Extending or shortening the hoist chain at the operator................. 10
Attaching information signs to the operator.....................................11
Safety catch ....................................................................................11
Connecting operator ........................................................................11
Connection to the power mains ...................................................... 12
%UDNHUHFWL¿HU ................................................................................. 12
Brake connection to GIGAcontrol A ................................................ 13
Connecting digital limit switches (encoders) .................................. 14
Mounting and connecting the control unit ...................................... 14
Connecting safety and accessory parts ......................................... 14
Initial operation ............................................................ 15
Safety instructions .......................................................................... 15
Checking the direction of running ................................................... 15
Setting the end positions and limit switches................................... 15
Operation / Use ............................................................ 16
Emergency release ........................................................................ 16
Rope for emergency manual switching .......................................... 16
Maintenance and care ................................................. 18
Safety instructions .......................................................................... 18
Regular testing ............................................................................... 18
Maintenance and addition testing .................................................. 18
Miscellaneous .............................................................. 19
Disassembly ................................................................................... 19
Disposal ......................................................................................... 19
Warranty and customer service ..................................................... 19
3
Symbols
CAUTION SYMBOL:
Indicates imminent danger. If it is not observed, serious or
life-threatening injuries and property damage may occur.
IMPORTANT INFORMATION SYMBOL:
Information, useful advice!
Refers to a respective picture in the introduction or main text.
This operator is manufactured in accordance
with
¾EN 12453 Safety in use of power operated gates, requirements
¾EN 12978 Safety devices for power operated doors and gates,
requirements and test methods
¾EN 12604 Doors and gates - Mechanical aspects - Requirements
¾Low Voltage Directive 2014 / 35 / EU
¾EMC Directive 2014 / 30 / EU
and has left the factory in good technical condition.
Safety instructions
General
¾These installation and operating manual must be read, understood
and complied with by persons who install, use or perform maintenance
on the operator.
¾Keep the installation instructions within reach.
¾Installation, connection and initial commissioning of the operator may
only be carried out by an electrician.
¾The system manufacturer is responsible for the complete system.
The system manufacturer must ensure that all applicable standards,
directives and regulations applicable at the installation site are
observed.
The system manufacturer must test and maintain the maximum
approved closing forces in accordance with EN 12445 (Safety in use
of power operated gates, test methods) and EN 12453 (Safety in use
of power operated gates, requirements). The system manufacturer is
responsible for preparation of technical documentation for the complete
system, and the documentation must accompany the system.
¾All electrical wiring must be firmly secured to prevent displacement.
¾The manufacturer does not accept liability for damage or malfunctions
resulting from non-observance of the installation and operating manual.
¾Before commissioning, ensure that the mains connection matches the
specications on the type plate. If this is not the case, the operator
must not be operated.
¾With a three-phase connection make sure that the direction of rotation
is clockwise.
¾Installations with a fixed mains connection require an all-phase mains
circuit breaker with appropriate fuses.
¾Take heed of and comply with the 'ASR A1.7 Technical Regulations
for Workplaces' of the committee for workplaces (ASTA). (Applicable
for the operator in Germany, observe and comply with the applicable
regulations in other countries).
¾Regularly check power cables and wires for insulation defects or
cracks. If a wiring fault is found, switch o the power immediately
and repair the faulty cable or wire.
¾Observe the requirements of the local power supplier.
¾Before working on the door or the operator, always disconnect the
control unit and operator from the power supply and lock to prevent
reactivation.
¾Never operate a damaged operator.
¾Only use OEM (Original Equipment Manufacturer) spare parts and
accessories.
Storage
¾The operator must be stored in an enclosed, dry area at a room
temperature of -20 - +50 °C and relative humidity of 20 - 90%
(non-condensing).
¾The operator should be stored horizontally.
+50°
20°
Operation
¾When using the automatic close function, ensure compliance with
EN12453 (e.g. install safety devices such as a photocell).
¾After installation and commissioning, all users must be instructed in
the function and operation of the system. All users must be informed
on the hazards and risks inherent in the system.
¾Open and close the door only if there are no persons, animals or
objects within its area of movement.
¾Continuously monitor the door while it is in motion and keep all persons
away from it until the door is completely opened or closed.
¾Do not drive through the door until it is fully open.
¾Never put your hand near the door when it is moving or near moving
parts.
¾Regularly check the safety and protection functions and repair faults
when they are detected (see Maintenance and care).
Type plate
¾The type plate is attached to the motor.
¾The type plate shows the exact type designation and the date of
manufacture (month/year) of the operator.
Intended use
NOTE!
After installation of the operator, the person responsible
for the installation must complete an EC declaration of
conformity for the door system in accordance with Machinery
Directive 2006/42/EC and apply the CE mark and a type plate.
This documentation and the installation and operating manual
are retained by the operator.
¾The operator is designed exclusively for opening and closing fully
installed industrial doors (e.g. sectional, roller, overhead, folding, fast-
acting and roll-up grille doors).
¾Any other use does not constitute intended use. The manufacturer
accepts no liability for damage resulting from use other than intended
use. The user bears the sole responsibility for any risk involved. It also
voids the warranty.
¾The operator is designed exclusively for operation in dry, non-explosive
indoor areas.
¾Doors automated with an operator must comply with all valid standards
and directives: e.g. EN 12453, EN 12604 and EN 12605.
¾The operator must be in good technical condition, and it must be used
for its intended purpose with an awareness of the hazards and as
described by the installation and operating manual. Do not exceed
the limit values specified in the technical specifications.
General information
Product specificaties
| Merk: | Sommer |
| Categorie: | Garagepoortopener |
| Model: | GIGAroll 300 Nm |
Heb je hulp nodig?
Als je hulp nodig hebt met Sommer GIGAroll 300 Nm stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Garagepoortopener Sommer
29 Maart 2025
29 Maart 2025
29 Maart 2025
29 Maart 2025
29 Maart 2025
28 Maart 2025
28 Maart 2025
28 Maart 2025
28 Maart 2025
18 Augustus 2023
Handleiding Garagepoortopener
- Craftsman
- Doco
- Novoferm
- DITEC
- Marantec
- MAC
- Superrollo
- Doorsystems
- Seculux
- Abon
- Tormatic
- Novotecnica
- Berner
- Entrematic
- Univer
Nieuwste handleidingen voor Garagepoortopener
15 November 2024
28 September 2024
1 December 2023
2 Oktober 2023
2 Oktober 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023