Snow Joe Ultra 18-Inch 13.5-Amp Handleiding

Snow Joe Sneeuwblazer Ultra 18-Inch 13.5-Amp

Lees hieronder de 📖 handleiding in het Nederlandse voor Snow Joe Ultra 18-Inch 13.5-Amp (16 pagina's) in de categorie Sneeuwblazer. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

®, LLC

A Division of Snow Joe

®, LLC

Model SJ620/SJ621 Form No. SJ-SJ620/SJ621-880E-MR2

OPERATOR’S MANUAL

SAVE THESE INSTRUCTIONS

13.5-AMP 18-INCH ELECTRIC SNOW THROWER

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Any electrical appliance can be dangerous if used incorrectly.

Some of the safety precautions given in this manual apply

generally to many appliances. Other warnings are specic

to the use of this snow thrower. Keep this manual for future

reference.

General Safety WARNINGS!

You and any other operator of this snow thrower must read,

understand and follow these instructions in their entirety, and

should reread them at the start of each snow season. Failure

to follow these instructions may result in ELECTRIC SHOCK,

FIRE and/or serious PERSONAL INJURY.

Notice the personal safety alert symbol m used in this

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION and

AWARENESS.

Work area safety

1. Keep work area clean and well lit. Cluttered, dark areas

invite accidents.

2. Do not operate the snow thrower in an explosive

atmosphere, such as in the presence of ammable

liquids, gases or dust. Electrical appliances create sparks

that may ignite the dust or fumes.

3. Keep children, pets and bystanders away from the

work area. Be aware that the normal noise of the

machine when turned on may make it dicult for you to

hear approaching people. Spectators should wear safety

glasses and be kept a safe distance away from the work

area. Do not let spectators touch the snow thrower or the

extension cord.

Electrical Safety

1. Electrical plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

grounded appliances. Unmodied plugs and matching

outlets will reduce the risk of electric shock.

2. Avoid body contact with earthed or grounded surfaces

(i.e. upper and lower water pipes, radiators, ranges,

refrigerators, microwave ovens and outer frames of

heating equipment). Take necessary precautions to avoid

electric shock. There is an increased risk of electric shock

if your body is earthed or grounded.

3. Do not abuse the cord. Keep cord away from heat,

oil, sharp edges or moving parts. Never carry the snow

thrower by its cord or yank the cord to disconnect it from

the electrical outlet. Damaged or entangled cords increase

the risk of electric shock.

4. Replace or properly repair damaged cords. If the cord

becomes damaged in any manner while plugged into the

wall receptacle, immediately pull the extension cord plug

from the receptacle.

5. Contact with water while operating the snow thrower

can result in electric shock and serious bodily injury.

Do not use the snow thrower in damp or wet locations or

expose to rain. Do not handle the plug or the appliance

with wet hands or while standing in water.

6. mWARNING – Only use a UL-rated extension cord

for OUTDOOR, all-weather use (usually orange color).

To prevent the extension cord from disconnecting during

operation, refer to Fig. 12 (p. 7).

7. Turnothepowerswitchanddisconnectthepower

cable before making any adjustments to the unit and

before inspecting, servicing, changing accessories

or cleaning the snow thrower. Follow the same

procedure if any other dangerous conditions present

during operation. Any adjustments to the unit should be

performed after revolving parts inside the snow thrower

stop completely. Such preventative safety measures

reduce the risk of starting the power tool accidentally.

8. Ifyoundthemainpowercableortheextensioncable

damaged, please pull out the plug from the socket and

disconnect the power immediately. Repair the cable or

replace it if necessary.

9. When replacing any parts, you must strictly observe

the instructions and procedures described in this

operator's manual. Special care should be paid to any

rubber parts, since these parts may increase the engine

load and decrease its mechanical power if damaged.

10. Do not move or transport the snow thrower when the

plug is connected to the power socket and the switch

is turned on.

11. If, during use, you notice that the unit runs unstably

or hear abnormal sounds from the engine, stop the

machine, disconnect the power immediately and

contact an authorized Snow Joe®/Sun Joe® service

center.

Personal Safety

1. Stay alert – Watch what you are doing and use common

sense when operating the snow thrower. Do not use the

machine when tired, ill or under the inuence of drugs,

alcohol or medication. A moment of inattention may result

in serious personal injury.

2. Wear proper clothing – Wearing rubber boots oers

additional protection from electric shock. Do not wear

loose clothing or jewelry that may become caught in the

machine. Wear protective headgear to keep hair away

from revolving parts of the machine. Safety glasses oer

better protection than everyday eyeglasses.

3. Moving parts present risks – Keep your face, hair,

clothing, hands and feet away from moving parts. All

guards and safety attachments must be installed properly

before using the unit. Shut o and disconnect the cord

before touching any parts other than the handles and

the switch.

4. Surfaces – This snow thrower is intended for use on

paved surfaces. Do not use on gravel, stone or other

unpaved surfaces unless the snow thrower is adjusted for

such surfaces according to the instructions given in this

operator’s manual.

5. Avoid accidental starting – Make sure the switch is in the

o position before plugging in the unit. Do not carry the

snow thrower with your nger on the switch.

6. Body position – Maintain proper footing and balance

at all times. Place heels rmly on the ground and tightly

grasp the handle bar. Watch for uneven surfaces and do

not overreach. In case you fall or collide with the snow

thrower, inspect the unit for any damages or cracks.

When stepping backwards, be careful to avoid obstacles

beneath your feet or behind you to avoid falling.

7. If the snow thrower strikes any object, immediately

stop the snow thrower, then inspect for damage –

Repair any damage before restarting and operating the

snow thrower.

Safety Instructions for Walk-Behind

Snow Throwers

• Readtheoperator’smanualcarefully–Learn your

snow thrower’s applications and limitations as well as the

specic potential hazards related to this machine. Do not

use this machine for any purpose other than the one for

which it was designed. Otherwise, it may cause mechanical

defaults, serious damage or personal injury.

• Preliminaryunitinspection–Thoroughly inspect the

unit before use. Make sure all the parts are secure and

installed correctly. If you notice any abnormalities, do not

use the machine until it has been properly repaired. Always

perform a test run the rst time you use the snow thrower

or after replacing parts to ensure that the unit is functioning

properly.

• Preliminaryareainspection–Clear the area to be plowed

before each use. Remove all objects, such as rocks, broken

glass, nails, wire or string, which can be thrown by or

become entangled in the snow thrower. Keep the area of

operation clear of all spectators, particularly children

and pets.

• Excessiveforce–The snow thrower was designed to

respond at a certain rate for various snow conditions for

optimum safety and performance. Do not force it; keep

pressure constant.

• Malfunctioningswitch–Do not use the snow thrower

if the switch does not turn it on and o. Any electrical

appliance that cannot be controlled by the switch is not

safe to use and must be repaired.

• Hittinganobject–If the snow thrower accidentally strikes

an object, follow these steps:

i) Stop the snow thrower and unplug the unit

ii) Inspect for damage

iii) Repair or replace any damaged part before restarting

and operating the snow thrower.

• Discharge chute safety – Never direct the snow discharge

chute at the operator, at bystanders, at vehicles or at

windows. The discharged snow stream and foreign objects

accidentally picked up by the snow thrower can cause

serious damage and personal injury. Do not use your hands

to unclog the discharge chute. Stop the motor before

removing debris.

• Hand-heldoperatingposition–Operation of the snow

thrower in the hand-held position is unsafe.

• Abnormaloperation–If you notice the snow thrower

running in an unstable state or hear abnormal sounds from

the engine, immediately stop the machine, disconnect the

power and contact an authorized Snow Joe®/Sun Joe®

service center.

• Noisecontrol–When using the snow thrower, you must

respect local laws and regulations regarding noise control

and environmental protection. To avoid noise disturbance,

you should carefully decide upon an appropriate operation

time and consider the surrounding conditions.

• Whenworkiscompleted–Disconnect the snow thrower

from the power source when not in use, when changing

accessories and before performing any maintenance

function.

• Storesafely–Store the snow thrower indoors in a dry area

between uses. Keep it in a locked area, where children and

unauthorized users cannot gain access. Do not store the

machine while it is still connected to the power source as

this may result in damage and injury.

• Maintainforsafetyandlongevity–Check for

misalignment or binding of moving parts, breakage of

parts and any other conditions that may aect the unit’s

operation. If damaged, repair or replace the damaged part

before use. Use only original replacement parts designed

specically for your model. When replacing any parts,

you must strictly observe the instructions and procedures

described in this manual. Special care should be paid to

any rubber parts, since these parts may increase the engine

load and decrease its mechanical power if damaged.

Always check that all bolts, nuts and knobs are tight before

using the snow thrower!

Safety Symbols

The following table describes safety symbols that may appear on this product. Read, understand and follow all instructions on

the machine before attempting to assemble and operate.

It is obligatory at all times to wear

goggles or a visor to protect the

eyes and face.

Disconnect the plug before

conducting maintenance or when

it is damaged or tangled. Do not

use this product in the rain or

leave outdoors while it is raining.

Wear safety gloves during

use to protect hands.

Beware of stones and other

objects that could be thrown

from the appliance. Keep all

bystanders and domestic

animals a safe distance away

from the work area.

Keep feet away from the moving

parts of the snow thrower. The

rotating parts can cause severe

bodily injury.

Keep hands and feet away

from the rotating parts.

Wear safety footwear at all

times to provide protection

against objects that may

accidentally fall on feet.

Keep hands away from the

moving parts of the snow

thrower. The rotating parts can

cause severe bodily injury.

The rotating part will

continuously run for several

seconds after you turn o

the machine.

Double insulation.

Keep the exible power supply

cord away from the cutting blades.

Always keep the power cable

away from heat sources, oils or

sharp edges. Immediately remove

plug from the mains if the cable is

damaged or entangled.

Symbols Descriptions Symbols Descriptions

READTHEOPERATOR'S

MANUAL(S) – Read,

understand and follow all

instructions in the user

manual(s) before attempting to

assemble and operate.

SAFETY ALERT – Indicates

a precaution, a warning or

a danger.

Product specificaties

Merk:	Snow Joe
Categorie:	Sneeuwblazer
Model:	Ultra 18-Inch 13.5-Amp
Kleur van het product:	Black, Blue
Gewicht:	14920 g
Breedte:	482.6 mm
Diepte:	1384 mm
Hoogte:	660.4 mm
Type motor:	Viertaktmotor
Werkbreedte:	457.2 mm
Maximum area performance:	- m²/uur
Intake hoogte:	254 mm
Parachute draaihoek:	180 °
Aardboor diameter:	254 mm