Snap Circuits Arcade SCA-200 Handleiding

Snap Circuits Speelgoed Arcade SCA-200

Lees hieronder de 📖 handleiding in het Nederlandse voor Snap Circuits Arcade SCA-200 (80 pagina's) in de categorie Speelgoed. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/80

-1-

Most circuit problems are due to incorrect assembly, always

double-check that your circuit exactly matches the drawing for it.

2. Be sure that parts with positive/negative markings are

positioned as per the drawing.

3. Be sure that all connections are securely snapped.

4. Try replacing the batteries.

5. If the programmable fan (M8) does not display any messages,

then it could be because you erased them without

programming in new ones. See project 15 for instructions on

how to program it.

Elenco®is not responsible for parts damaged due to

incorrect wiring.

Basic Troubleshooting

Note: If you suspect you have damaged parts, you can follow the

Advanced Troubleshooting procedure on page 10 to determine which

ones need replacing.

Basic Troubleshooting 1

Parts List 2

How to Use Snap Circuits® 3

About Your Snap Circuits®Parts 4-6

Summary of Games in the LED MC (U29) 7

Introduction to Electricity 8

DOs and DON’Ts of Building Circuits 9

Advanced Troubleshooting 10

Project Listings 11, 12

Projects 1 - 203 13-76

Notes 77

Other Snap Circuits®Projects 78

WARNING: SHOCK HAZARD - Never connect

Snap Circuits®to the electrical outlets in your home

in any way!

Table of Contents

WARNING: Always check your

wiring before turning on a circuit.

Never leave a circuit unattended

while the batteries are installed.

Never connect additional batteries

or any other power sources to your

circuits. Discard any cracked or

broken parts.

Adult Supervision:

Because children’s abilities vary so

much, even with age groups, adults

should exercise discretion as to

which experiments are suitable and

safe (the instructions should

enable supervising adults to

establish the experiment’s

suitability for the child). Make sure

your child reads and follows all of

the relevant instructions and safety

procedures, and keeps them at

hand for reference.

This product is intended for use by

adults and children who have

attained sufficient maturity to read

and follow directions and warnings.

Never modify your parts, as doing

so may disable important safety

features in them, and could put

your child at risk of injury.

 Use only 1.5V AA type, alkaline

batteries (not included).

 Insert batteries with correct

polarity.

 Non-rechargeable batteries

should not be recharged.

Rechargeable batteries should

only be charged under adult

supervision, and should not be

recharged while in the product.

 Do not connect batteries or

battery holders in parallel.

 Do not mix old and new batteries.

 Do not mix alkaline, standard

(carbon-zinc), or rechargeable

(nickel-cadmium) batteries.

 Remove batteries when they are

used up.

 Do not short circuit the battery

terminals.

 Never throw batteries in a fire or

attempt to open its outer casing.



Batteries are harmful if swallowed,

so keep away from small children.

Batteries:

WARNING: CHOKING HAZARD - Small parts. Not

for children under 3 years.

Conforms to all applicable U.S.

government requirements and

CAN ICES-3 (B)/NMB-3 (B).

WARNING: Moving parts. Do not

touch the fan while it is spinning.

-2-

Important: DO NOT RETURN TO RETAILERIf any parts are missing or damaged, . Call toll-free (800) 533-2441 or e-mail us at:

help@elenco.com. Customer Service ● 150 Carpenter Ave. ● Wheeling, IL 60090 U.S.A.

Parts List (Colors and styles may vary) Symbols and Numbers

Qty. ID Name Symbol Part # Qty. ID Name Symbol Part #

1rBase Grid

(11.0” x 7.7”) 6SCBG 1rJumper Wire

(Black, 18”) 6SCJ1

2r1-Snap Wire 6SC01 1rJumper Wire

(Red, 18”) 6SCJ2

6r2-Snap Wire 6SC02 1rJumper Wire

(Orange, 8”) 6SCJ3A

3r3-Snap Wire 6SC03 2rJumper Wire

(Blue, 4”) 6SCJ4

1r4-Snap Wire 6SC04 1rProgrammable Fan 6SCM8

1r5-Snap Wire 6SC05 1rPNP Transistor 6SCQ1

Battery Holder - uses three (3)

1.5V type “AA” (not Included)

6SCB3 1rNPN Transistor 6SCQ2

1rRed Light Emitting

Diode (LED) 6SCD1 1rSlide Switch 6SCS1

1rGreen Light Emitting

Diode (LED) 6SCD2 1rPress Switch 6SCS2

Red/Yellow Bicolor Light

Emitting Diode (LED)

6SCD10 1rSelector 6SCS8

1rDisco Motor 6SCDM 1rSpeaker 6SCSP2

1rSupport Bar for Disco

Covers 6SCDMSB 1rAlarm IC 6SCU2

1rDisco Cover, Triangle 6SCDMCT 1rLED Display and

Microcontroller 6SCU29

Disco Cover, Hexagon

6SCDMCH

You may order additional / replacement parts at our website: www.snapcircuits.net

U29

D10

SP2

Product specificaties

Merk:	Snap Circuits
Categorie:	Speelgoed
Model:	Arcade SCA-200
Kleur van het product:	Blue, Translucent
Gebruikershandleiding:	Ja
Stroombron:	Batterij/Accu
Aanbevolen leeftijd (min):	8 jaar
Type verpakking:	Doos
Ondersteund aantal accu's/batterijen:	3
Voorgesteld geslacht:	Jongen/meisje
Batterijen vereist:	Ja
Aantal stuks:	30 stuk(s)
Thema:	Elektriciteit
Batterijen inbegrepen:	Nee
Type product:	Elektrische set
Type batterij:	AA
EU TSD-waarschuwing:	Niet geschikt voor kinderen onder de 36 maanden
Awards:	Stuurpen