Smeg DWAFI6D15PO Handleiding

Smeg Vaatwasser DWAFI6D15PO

Bekijk gratis de handleiding van Smeg DWAFI6D15PO (41 pagina’s), behorend tot de categorie Vaatwasser. Deze gids werd als nuttig beoordeeld door 106 mensen en kreeg gemiddeld 4.8 sterren uit 9 reviews. Heb je een vraag over Smeg DWAFI6D15PO of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PDF downloaden (6.2 MB)

Pagina 1/41

INSTRUCTION MANUAL

Beoordeel deze handleiding

4.8/5 (9 Beoordelingen)

Product specificaties

Merk:	Smeg
Categorie:	Vaatwasser
Model:	DWAFI6D15PO

Foutcodes Smeg DWAFI6D15PO

Foutcodes uit de officiële handleiding, met betekenis en oplossing.

Code	Betekenis	Oplossing
E1	Acquastop failure - The anti-flooding system has been activated	Contact the after-sales service
E11	Wash motor pump does not work	Contact your Service Centre
E2	Safety level - The system which limits the water level inside the dishwasher has been tripped	Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service
E3	Water heating malfunction - The water is not heated or the heating parameters are not correct	Repeat the washing program; if the problem persists, contact the after-sales service
E4	Water temperature monitoring malfunction	Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service
E5	Water intake malfunction - The appliance does not take in water or does not do so correctly	Check that the water connections are correct, the water intake tap is turned on and the filter is not fouled. If the problem persists, contact the after-sales service
E6	Water pump-out malfunction - The appliance does not pump out the water or does not do so correctly	Check that the drain hose is not kinked or crushed and that the siphon and filter are not fouled. If the problem persists, contact the after-sales service
E7	Turbine flow-regulator malfunction - The appliance is not able to measure the amount of water loaded accurately	Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service
E8	Alternate washing system malfunction	Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service
E9	Water intake system malfunction	Contact the after-sales service