Smeg DIC410 Handleiding

Smeg Vaatwasser DIC410

Bekijk gratis de handleiding van Smeg DIC410 (37 pagina’s), behorend tot de categorie Vaatwasser. Deze gids werd als nuttig beoordeeld door 107 mensen en kreeg gemiddeld 4.8 sterren uit 6 reviews. Heb je een vraag over Smeg DIC410 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PDF downloaden

Pagina 1/37

INSTRUCTION MANUAL

Beoordeel deze handleiding

4.8/5 (6 Beoordelingen)

Product specificaties

Merk:	Smeg
Categorie:	Vaatwasser
Model:	DIC410
Apparaatplaatsing:	Volledig ingebouwd
Soort bediening:	Knoppen
Breedte:	448 mm
Diepte:	550 mm
Hoogte:	818 mm
Aantal couverts:	10 couverts
Deurkleur:	Zwart
Uitgestelde start timer:	Ja
Kinderslot:	Ja
Duur cyclus:	100 min
Geluidsniveau:	46 dB
Energie-efficiëntieklasse:	F
Installatie compartiment breedte:	50 mm
Installatie compartiment diepte:	575 mm
Waterconsumptie per cyclus:	9.5 l
Installatie compartiment hoogte (min):	820 mm
Geluidsemissieklasse:	C
Aantal wasprogramma's:	5
Energieverbruik per 100 cycli:	83 kWu
Productafmeting:	Slimline (45 cm)
Kleur bedieningspaneel:	Zwart
Bestek compartiment type:	Mand
AquaStop-functie:	Ja
Afwasprogramma's:	Eco, Glass/delicate
Energieverbruik per cyclus:	0.83 kWu
Bovenste mand verstelbare hoogte:	Ja
Installatie compartiment hoogte (max):	868 mm
Temperatuur (max):	70 °C
Manden verstelbare plaatsing:	Lower, Upper
Ingebouwde water verzachter:	Ja
Energie-efficiëntieschaal:	A tot G

Foutcodes Smeg DIC410

Foutcodes uit de officiële handleiding, met betekenis en oplossing.

Code	Betekenis	Oplossing
E1	Aquastop failure - The anti-flooding system has activated (relevant models only). The system trips in case of water leaks.	Contact the after-sales service.
E2	Safety level - The system which limits the water level inside the dishwasher has tripped.	Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the wash cycle. If the problem persists, contact the after-sales service.
E3	Water heating malfunction - Water heating is not operating or operating incorrectly.	Repeat the wash program; if the problem persists, contact the after-sales service.
E4	Water temperature monitoring malfunction - Temperature sensor not functioning correctly.	Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the wash cycle. If the problem persists, contact the after-sales service.
E5	Water intake malfunction - The appliance is not taking in water or is not doing so correctly.	Check that the water connections are correct, the water supply tap is turned on and the filter is not clogged. If the problem persists, contact the after-sales service.
E6	Water pump-out malfunction - The appliance is not pumping out the water or is not doing so correctly.	Check that the drain hose is not kinked or crushed and that the trap or filters are not clogged. If the problem persists, contact the after-sales service.
E7	Turbine flow-regulator malfunction (relevant models only) - The intake water quantity is not being measured accurately.	Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the wash cycle. If the problem persists, contact the after-sales service.
E8	Alternate wash system malfunction - The wash system is not operating correctly.	Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the wash cycle. If the problem persists, contact the after-sales service.
E9	Water intake system malfunction - The water intake system is not functioning correctly.	Contact the after-sales service.