Skytec STM-3007 172.736 Handleiding

Skytec Mengpaneel STM-3007 172.736

Lees hieronder de 📖 handleiding in het Nederlandse voor Skytec STM-3007 172.736 (23 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/23
USER GUIDE
STM-3007
INSTRUCTIONS
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
172.736
Safety Precaution
Read all documentations carefully before operating the equipment.Retain this manual for future reference.Follow all
instructions printed on unit for proper operation.
Do not open cover (or back cover) to reduce the risk of electric shock or fire.
There are no user serviceable parts inside.Refer servicing to qualified service Personnel.
This symbol is used to alert the poerator to the presence of important operationg instructions and precautions detailed in
the documentation manual.
This symbol is used to warn operators that uninsulated dangerous voltages are present within the products enclosure that
may pose a risk of electric shock.
Warning: To avoid fire or risk of electric shock,do not expose this unit to rain or moisture.
Notes:
.Make sure power outlets conform to the power requirements listed on the back of the unit.
.Main voltage must be correct and the same as that printed on the rear of the unit.
.Do not use the unit if the electrical cord is frayed or broken.
.The unit shall not be exposed to dripping or splashing and that no objects filled with liquids,such as vases, shall be placed
on unit.
.The unit shall be connected to mains socket outlet with a protective earthing connection.
.Power plug sa a equipment that separate from power supply system, it must be easy to operating.
Warning:
.Using, adjustintg or changing program control beyond this specification may cause dangerous radiation.
.The unit should be serviced by qualified service personnel.
.When repairing,use only same specification parts.
Notes:
.Select the voltage requirement through the voltage selector switch at the real panel.
.Make sure that the power of the equipment is oand disconnected from the main voltage before switching the voltage
selector to the required setting .We will not be responsible for damages arising from the improper installation,wiring or
operation due to the fault or negligence of the user.
Record your model and serial number here:
Importance:
1) Read manual -Please read through safety and operating instruction carefully before using this unit. --
2) Keep manual Please keep this manual for future reference. ---
3) Attach importance to warning and note Please operate it according warning and bote of manual. ---
4) Do it according what the manual indicates Do it according to instruction of manual. ---
5) Water and moisture Position of the unit don --- t close to awter. E.g.close to bath,wash by tub,washtub,
6) Carriage and rack -The unit ought to match carriage and rack that manufacturer recommended. --
Please be careful while carriage with the unit is moving.
Sudden stop,great power and rough surface may cause combination turns over.
7) Fix on wall or ceiling Manufacturer suggest product only be fixed on wall or ceiling. ---
8) Heat Device do not leave heat source such as radiator,stove and amplifier etc. ---
9) Power supply The unit only operate with rated power supply.Please ask dealer or local power supply company ---
while not ensure type of power supply .If operationg with batteries or other power supply, please refer to this booklet.
10) Connectiong ground or polarization Perhaps this unit has a polarization AC plug. This plug only has a method to be ---
inserted.Its characteristic is safety.
11) Power cord protect Power cord do not be trampled or be pressed. ---
12) Clean Clean this unit with a soft cloth. Prevent water to enter into inner. ---
13) For device with AC power cord,check AC plug sheet and all of exposed metal parts with ohmmeter before using ,an d
resistance ought to be more than 100K ohm.
14) Stop period Unplug the power cord if the unit is not used for a long time. ---
15) Prevent solid and liquid to enter into unit Be CARE FULLY ,DO NOT FALL SOLID OR SPATTER LIQUID AT ---
HOLE OF UNIT.
16) Mangle for repai If cause following case ,refer to qualified service personnel: r ---
A) Power cord or plug mangle; or
B) Inside of unit have falling solid or liquid; or
C) The unit be rained ; or
D) Device do not work; or
E) The unit be fallen,or cover be mangle.
17) Repair User do not repair unit except operating to depend on manual instruction. All of above symptoms should ---
refer to qualified service personnel.
18) Ventilation Function of cover --- s interval and hole is ventilation. It ensure operationg reliability and prevent to
overheat. Do not cover this hole absolutely. Do not place unit on bed , blandet, sofa or similar objects surface .Do not
place unit in objects inner,such as bookcases inner, Shelfs inner etc.
19) Accessories Not use parts that manufactory do not recommend in order to avoid damage. ---
20) Auxiliary equipment Do not place this unit on unstable vehicle,shelf,tripod or table. It will cause serious harm to ---
child or adult if the unit be fallen. Pleasel use the vehicle, shelf, tripod or table that manufactory recommen.
21) Preventing thunderbolt Add preventing thunderbolt equipment, or if the unit is not used for a long time, unplug the ---
power cord.
22) Replace parts If the unit require replacing part, you must replace with manufactory recommend, or same ---
characteristic part.
23) Safety check After repairing, repairer must test the unit for security. ---
Not On Use
Allow for sufficient heat dispersion when installed on a rack.
1) Handle the power cord carefully.
Hold the plug when unplugging the cord.
2) Keep the set free from moisture,water and dust.
3) Unplug the power cord when not using the set for long periods of time.
4) Do not obstruct the ventilation holes.(For sets with ventilation holes.)
5) Do not let foreign objects in the set.
6) Do not let insecticidese, benzene, and thinner come in contact with the set.


Product specificaties

Merk: Skytec
Categorie: Mengpaneel
Model: STM-3007 172.736

Heb je hulp nodig?

Als je hulp nodig hebt met Skytec STM-3007 172.736 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Mengpaneel Skytec

Handleiding Mengpaneel

Nieuwste handleidingen voor Mengpaneel