Skan Holz Basel 1 Handleiding
Skan Holz
Niet gecategoriseerd
Basel 1
Lees hieronder de 📖 handleiding in het Nederlandse voor Skan Holz Basel 1 (9 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 3 gebruikers gemiddeld met 4.8 sterren beoordeeld
Pagina 1/9
Basel 1 420 x 300cm
1
Important information for your wood panel cabin
Please check the construction set for completeness using the position list in good time before starting con-
struction or commissioning your construction team. If individual parts are defective or missing, we will deliver
these as quickly as possible. However, we cannot refund the costs for any resulting construction delays to a
construction company.
Please understand that we cannot assume any guarantee fort he following defects:
- incorrect storage before assembly
- incorrect anchoring with the ground or inadequate foundation (foundation according to statics)
- damage due to erection errors, e. g. the house is not level or not right-angled
- damage through a higher level of snow burden than statically envisaged. Recommendation: lad relief of
the roof by removing the snow layer
- storm damage (insurance cases) or violent destruction
- damage through any alteration to the design by the client
- natural formation of cracks, branch holes, twisting, decolouration or similar modification (natural process;
has no influence on the statics)
Storage tips before assembly:
- store pallet on a level and dry surface.
- protect against sunshine and dampness; wood can warp drastically in a loose condition!
Maintenance tips:
Please observe the attached information sheet “Care instructions/Colour treatment”.
General tips and refers to:
As the house is exposed constantly to the weather, it is necessary to lay a further welding line. You have to make
it for your own.
A possibly desired installation of a rain gutter must be done by the building contractor; for this the roofing boards
must be cut to the right length.
Foundation according (to the structural calculations, not included in the scope of delivery): concrete C25/30,
strip foundation: Bottom panel: w/h = 30/90cm, each 2 Ø 12 top and bottom, bow Ø 6, e < 20cm.
t=14cm,Q188A, top and bottom throughout. Anchoring of the floor beams on the strip foundation using bolts M12,
e < 60cm (by customer).
During the assembly of the planks that the planks are fixed with approx. it is essential to make sure 1mm
distance and the top planks have the same height all around.
Due to storage, the measurements of the planks may change over time and change the heigth of the wallplanks.
Please remember this during the installation of the planks, .otherwise it may result in different wall heights
If the door , this can be adjusted by .cannot be closed properly turning the hinges
The roofing boards are laid out up to the inner edge of the outer facing. The final roofing board must be adjusted
in width. The roofing boards must be cut out as necessary in the area near the fastening wood H58/58-00 (34cm).
It is planned to have the roofing paper go up the sides over the existing gap as high as the facing, and to attach it
there on the facing. The building contractor can also lay strips over the gap, or the roofing paper can be laid right
up to the upper edge of the facing; this will then be covered by the aluminium strip A100-220.
-
-
-
-
-
-
-
1
1
2
2
3
4
© SKAN HOLZ Europe GmbH D-21227 Bendestorf. Technical modifications reserved. All dimensions are approximate dimensions. Date 07/18
610884 (unbehandelt)
610884-13 (schiefergrau)
5
420 x 300cm
3 x H28/140-00
18cm
42 x H19/119-01
161cm
3 x 45-29-001
453cm
27 x H16/58-00
34cm
4 x H16/101-00
219cm
2 x H16/101-00
231,4cm
2 x H16/101-00
245cm
2 x H16/58-00
348,4cm
4 x H16/58-00
225,8cm
8 x A100-220
220cm
6 x H19/119-00
356,2cm
6 x H19/119-00
460cm
2 x H30/33-00
34cm
2 x H58/58-0
242cm
5 x H28/140-00
36,5cm
9 x H12/40-00
350cm
42 x H19/119-01
116cm
9 x H12/25-00
130cm
1 x 45p-D
5 x H19/58-02
300cm
42 x H19/119-01
72,2cm
© SKAN HOLZ Europe GmbH, D-21227 Bendestorf. Stand 07/18
1 x H19/120-00
16cm
2 x H19/120-00
26cm
1 x H19/120-00
29cm
2 x H19/120-00
33cm
1 x H16/101-00
228,4cm
26 x H19/121-01
410,5cm
9 x H58/58-03
287,5cm
2 x H58/58-03
419cm
610884
610884
420 x 300cm
6
5
6
2 x B105-040
40mm
6.2
B105-100
100mm
5.1
5.2
6.2
B105-100
100mm
4mm
B105-100
100mm
5.3
5.2
+
5.3
5.1
2 x B105-100
100mm
*
*
6.1
H19/119-01
6.4
H19/119-01
H16/58-00
6.1
6.4
H16/101-00 +(245cm)
4 x B105-040
40mm
H16/101-00 +(231,4cm)
4 x B105-040
40mm
2 x B105-100
100mm
2cm
4
H16/58-00+
2 x B105-060
60mm
6.1
B105-080/100/120
80/100/120mm
1 x B105-100
100mm
6.3
H12/40-00+
B105-030
30mm
6.3
45-06-0009
45-06-0009
H19/119-01 +(161cm)
6 x B105-040
40mm
H19/119-01 +(116cm)
4 x B105-040
40mm
H19/119-01 +(72,2cm)
4 x B105-040
40mm
x = x
© SKAN HOLZ Europe GmbH, D-21227 Bendestorf. Stand 07/18
*
*
*
*
1 x B105-120
120mm
1 x B105-080
80mm
50cm
X
X
XX
50cm
#
#
#
#
#
#
#
4 x B105-040
40mm
H16/101-00 +(228,4cm)
17 x B105-040
40mm
H16/101-00 +(219cm)
4 x B105-040
40mm
H16/101-00 +(245cm)
4 x B105-040
40mm
610884 (unbehandelt)
610884-13 (schiefergrau)
ggf.
Product specificaties
| Merk: | Skan Holz |
| Categorie: | Niet gecategoriseerd |
| Model: | Basel 1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Skan Holz Basel 1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Skan Holz
3 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
24 Oktober 2022
Handleiding Niet gecategoriseerd
- Niet gecategoriseerd SainSmart
- Niet gecategoriseerd Proctor Silex
- Niet gecategoriseerd Evooch
- Niet gecategoriseerd MooreCo
- Niet gecategoriseerd Lagrange
- Niet gecategoriseerd Werma
- Niet gecategoriseerd Trace Elliot
- Niet gecategoriseerd Intex
- Niet gecategoriseerd Platypus
- Niet gecategoriseerd Hubble Connected
- Niet gecategoriseerd Fontiso
- Niet gecategoriseerd Maruyama
- Niet gecategoriseerd EBS
- Niet gecategoriseerd CE Labs
- Niet gecategoriseerd Oras
Nieuwste handleidingen voor Niet gecategoriseerd
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025