Skagen Freja Handleiding

Skagen Horloge Freja

Lees hieronder de 📖 handleiding in het Nederlandse voor Skagen Freja (14 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14

InstructIons and care

Skagen suggests the following solutions for cleaning metal and crystal surfaces:

3:1 solution of ammonia based window cleaner to water

4:1 solution of rubbing alcohol to water.

*Do not use soap products, soap will leave residue behind when dry.

These suggested solutions will evaporate cleanly from metal and glass surfaces.

To clean the case and crystal:

Moisten a soft cloth with one of the above solutions. Gently wipe the case and

crystal clean. Be careful not to put too much stress on the crystal as you clean. Avoid

immersing or soaking the case or crystal portion of the watch, regardless of water

resistance rating.

To clean the band or strap:

Metal: Dip a cotton swab into the above solution and gently rub it on the unclean

area of the band. For more intricate mesh bands, you may want to use a soft bristle

toothbrush or nailbrush. Be sure to cover the case of the watch during this process so

as not to soak it. For stubborn dirt, you may want to take your watch in to the nearest

Skagen location.

Silicon, Felt and Ceramic: Simply wipe the strap down with a damp, soft cloth. Avoid

soaps and solvents as they may damage the material.

Leather: Simply wipe it clean with a damp cloth, using water only. You may want to

use leather conditioner or a small amount of hand lotion to keep the leather supple

over time. Top grain leather may develop a milky “haze” if left alone for extended

periods. This can simply be wiped away or removed with leather conditioner. A

product called “nubuck eraser” can be used to remove light stains and debris from the

inside of the strap.

WATCH CARE

TO ADJUST THE BAND: LIFT – SHIFT - PRESS

1. Position a athead screwdriver or other adjustment tool in the slot on the clasp.

Lift the bar in the direction facing away from the straight pin.

IMPORTANT: Ensure that the tool handle points toward the watch case.

Pressing the adjustment tool against the straight pin may bend and destroy the pin.

2. Shift the adjustable buckle to the desired position. Clasp must be placed in one of the

adjustment indentations on the back of the band.

3. Press the slotted clasp closed.

ShiftLift Press

1 2 3

TO SECURE THE BAND: HOOK – SNAP - CLASP

Pull the hook over the pin, snap the at clasp closed, then close the

security clasp.

1 2 3

SnapHook Clasp

Mesh Band adjustMent

InstructIons

Product specificaties

Merk:	Skagen
Categorie:	Horloge
Model:	Freja
Type horloge:	Horloge
Chronograaf:	Nee
Chronometer:	Nee
Type wijzerplaat horloge:	Analoge wijzerplaat
Waterdicht:	Ja
Waterbestendig druk:	5 ATM
Schokbestendig:	Nee
Kleur behuizing:	Roségoud
Band materiaal:	Roestvrijstaal
Hoofdkleur van band:	Roségoud
Hoesvorm:	Rond
Hoofdkleur van wijzerplaat:	Wit
Geslacht:	Vrouw
Band breedte:	14 mm
Kastdiameter:	26 mm
Kastdikte:	7 mm